Pyle PDICBT87, PDICBT57, PDICBT67 User guide

PDICBT57- Dual 5.25" Speakers
PDICBT67- Dual 6.5" Speakers
PDICBT87- Dual 8.0" Speakers

Wireless BT Streaming

Wall / Ceiling Speaker System

REAR SPEAKERS

5-6FT

LLAWLLAWLLAWLLAW

IN-CEILING

Proper placement of the speakers is an
important step in obtaining the most realistic
soundstage possible. These recommendations
are for the optimum placement of the loud
speakers. Use these placement recommenda
tions as a guide. Slight variations will not
diminish your listening pleasure.The front speakers should be placed the
same distance from each other as they are from the listening position. They
should be placed at about the same height from the oor as the listener’s
ears will be, with the tweeters aimed toward the listener at ear-level height.
In a home theater conguration, the two surround, speakers should be
placed slightly behind the listening position and ideally should face each
other and be at a level higher than the listener’s ears. If that is not possible,
they may be placed in a wall (or in the ceiling) behind the listening
position, facing forword. The surround speakers should not call attention to
themselves. They should provide a diuse, ambient sound accompanying
the main program material heard in the front speakers. In Dolby*Digital and
DTS systems, aim the tweeters toward the listening position at ear-level
height.

www.PyleUSA.com

2

Speaker Power Supply Connection:

The active speaker features the power supply for the speaker system. You
may choose to use the included power supply adapter to connect directly
into the active speaker's power supply input. *Optional power supply
connection can be made by directly 'hard-wiring' power supply cables to
the speaker's power supply screw terminal post -- as pictured, also located
on the active speaker.

Passive Speaker

*Optional Power

Source Input

Plug-in Power

Adapter Input

Active Speaker

3

-

+

www.PyleUSA.com

Speaker Connection (Active-to-Passive)

Create the daisy-chain style speaker connection to allow speaker-to­speaker audio communication output. The included speaker wire is used to
connect the active speaker to the passive speaker. Ensure proper speaker
connection wiring between the speakers.

Passive Speaker

www.PyleUSA.com

-

+

Active Speaker

4

Bluetooth Pairing

Once the speakers are installed and powered -- search the Bluetooth
network name " Pyle Audio USA" on your device. Ensure the Bluetooth
Receiver Switch is set to ON position -- as located on the active speaker.
If you are prompted for a password, enter '0000' (4 zeroes).

Passive Speaker

Bluetooth

Receiver Switch

-

+

Active Speaker

5

www.PyleUSA.com

INSTALLATION

TOOLS NEEDED

The in-wall/in-ceiling speakers were designed to be easily installed.
However,if you are unsure of your ability to properly install these loud
speakers please contact your dealer or a qualied installer.

Pencil

Measuring tape

Carpenter’s level

Phillips #2 screwdriver

Utility knife

Awl

1. Cut the drywall
Note: Always allow at least one-half inch between a wall stud and the

speaker cutout or the locking tabs will not be able to swivel into place.

2. Connect the speaker wires to the speaker

6

3. Screw down each of the four Phillips head screws.The locking tabs will
swivel into place and secure the unit to the rear surface of the drywall.
Put in the strips of adhesive to secure the grill.

4.

Replace the metal grill. 5. Complete

TROUBLESHOOTING

IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS:

• Check that receiver/amplier is on and a source is playing.

• Check all wires and connections between receiver/amplier and

speakers. Make sure all wires are connected. Make sure none of the
speaker wires are frayed, cut, punctured or tounching each other.

• Review proper proper operation of your receiver/amplier.

IF THERE IS NO SOUND COMING FROM ONE SPEAKERS:

• Check the “Balance” control on your receiver/amplier.

• Check allwires and connections between receiver/amplier and speakers.

Make sure all wires are connected. Make sure none of the speaker wires
are frayed, cut, punctured or tpunching each other.

7

www.PyleUSA.com

IF THERE IS LOW (OR NO) BASS OUTPUT:

• Make sure the connections to the left and right “speaker Inputs” have the

correct polarity (+ and -).

• Consider adding a powered subwoofer to your system.

• In Dolby Digital or DTS modes, make sure your receiver/processor is

corectly congured. When using a subwoofer, make sure the subwoofer
output of the receiver/processor has been enabled. If no subwoofer is
being used, make sure the left and right front and rear speakers have

been congured as “LARGE” See your receiver/processor’s owner’s manual

for futher information on correct speaker conguration in Dolby Digital,
DTS and other surround sound modes.

IF THE SYSTEM PLAYS AT LOW VOLUME BUT SHUTS OFF AS VOLUME IS
INCREASED:

• Check all wires and connections between receiver/amplier and

speakers. Make sure all wires are connected. Make sure none of the
speaker wires are frayed, cut, punctured or touching each other.

• If more than one pair of main speakers is being used,check the minimum

-impedance requirements of your receiver/amplier.

PDICBT57 - PDICBT67 - PDICBT87

Wireless BT Streaming Wall / Ceiling Speaker System

MODEL PDICBT57 PDICBT67 PDICBT87

Sound System

MAX Power
Output

Eciency 86dB 88dB 90dB

Frequency
Response

Total Speaker
Size

Cut-Out Size

www.PyleUSA.com

5.25’’ Speaker
+ 1’’ Tweeter

240 Watt 300 Watt 400 Watt

100Hz-20kHz 70Hz-20kHz 50Hz-20kHz

7.8’’ Diameter,

3.0’’ Depth

7.0’’ Diameter,

2.9’’ Depth

6.5’’ Speaker
+ 1’’ Tweeter

9.4’’ Diameter,

3.9’’ Depth

7.9’’ Diameter,

3.7’’ Depth

8

8.0’’ Speaker
+ 1’’ Tweeter

10.7’’ Diameter,

4.6’’ Depth

9.6’’ Diameter,

4.4’’ Depth

Features:

• Includes (2) Speakers (Active + Passive)

• Bluetooth Wireless Music Streaming Ability

• 2-Way Full Range Stereo Sound

• Built-in Digital Sound Amplier

• Mounts Flush to Walls or Ceilings

• Screw Terminal Block Speaker Connectors

• Ability to Daisy-Chain Speakers for Stereo System Sound

• Environmentally Friendly ABS Construction

• Perfect for Custom Installations & Applications

Bluetooth Connectivity:

• Includes Bluetooth Control Receiver

• Stream Wireless Audio from Your Connected Device
(Smartphone, Tablet, Laptop, Computer, etc.)

• Bluetooth Network Name: ‘Pyle USA’

• Bluetooth Network Password: ‘0000’ (4 Zeroes)

• Bluetooth Version: 3.0

• Wireless Range: Up to 40’+ ft.

What’s in the Box:

• Active Speaker

• Passive Speaker

• 12V Power Adapter

• Speaker Connection Cable, 16’ ft.

Technical Specs:

• Impedance: 8 Ohm

• Power: 100/240V, 12V Power Adapter

• Sold as: Pair

9

www.PyleUSA.com