Page 1
2-Channel Bluetooth Ceiling / Wall Speaker,2-Way
Flush Mount Home Speakers
Depth
Mounting
Cut-Out
Diameter
• PDICBT552RD • PDICBT652RD • PDICBT852RD
4-Channel Bluetooth Ceiling / Wall Speaker,2-Way
Flush Mount Home Speakers
• PDICBT256 • PDICBT266 • PDICBT286 • PDICBT2106
80-20 kHz
88 dB
70-20 kHz
88 dB
Response
Frequency
Sensitivity
8 Ohm
8 Ohm
Impedance
Power
MAX Output
Size
Speaker
Speakers
Amount of
50-20 kHz
80-20 kHz
89 dB
88 dB
8 Ohm
8 Ohm
2 8.0'' 250 Watt 9.3'' 3.0''
60-20 kHz
40-20 kHz
89 dB
89 dB
8 Ohm
8 Ohm
35-20 kHz 10.5'' 3.8''
89 dB
8 Ohm
1600-63rd Street
Brooklyn,NY 11204 USA
BLUETOOTH CEILING/WALL SPEAKERS
INSTALLATION MANUAL
EXISTING CONSTRUCTION
IN-CEILING SPEAKERS
Cut the drywall.
Note:Always allow at least
one-half inch between a wall
stud and the speaker cutout or
the locking tabs will not be able
to swivel into place.
Replace the metal grille.
Model
Number
PDICBT552RD 2 5.25'' 150 Watt 6.5'' 2.6''
Techical Specs Table :
PDICBT652RD 2 6.5'' 200 Watt 7.6'' 2.8''
PDICBT256 4 5.25'' 150 Watt 6.8'' 3.0''
PDICBT852RD
PDICBT266 4 6.5'' 200 Watt 7.9'' 3.1''
PDICBT286 4 8.0'' 250 Watt 9.4'' 3.5''
PDICBT2106 4 10.0'' 300 Watt
Thank you for purchasing this PYLE Bluetooth Ceiling / Wall Speaker system.
It is astate-of-the-art product carefully designed and manufactured for your
installationneeds,and has been thoroughly tested to ensure consistent and reliable
perfor-mance.
If you have any question about the installation or operation of your PYLE
Bluetooth Ceiling / Wall Speaker System which are not answered by this manual,
contactyour dealer immediately.
Bluetooth Connection Diagram
2 CHANNEL
A B
Bluetooth Version:4.0
Bluetooth Network Name:Pyle
Bluetooth Network Password:‘0000’
Bluetooth Wireless Range:30’+Feet
Bluetooth Connection Diagram
4 CHANNEL
A B
2 3 4
1
1 2 3 4
Amplification
-L+
-R+
Bluetooth Version:4.0
Bluetooth Network Name:Pyle
Bluetooth Network Password:‘0000’
Bluetooth Wireless Range:30’+Feet
5
DC12V
D1
Connect the speaker wires to
the speaker.
Screw down each of the four
Phillips head screws.The
locking tabs will swivel into
place and secure the unit to
the rear surface of the drywall.
Put in the strips of adhesive to
secure the grille.
Complete.
1
2 3 4
-R+
5
DC12V
D1
D
1 2 3 4
Amplification
-L+
C
As shown in pictures, A is speaker, B is speaker, C is bluetooth controller, D is power adapter.
As shown is Picture C, port (1)(2) connect to the negative pole of speaker in Picture A,
port (3)(4) connect to the positive pole of speaker in Picture B,port (5) connects to power
adapter in Picture D’s D1port.
C
Amplification
D
6 7 8 9
6 7 8 9
E F
As shown in pictures, A is speaker, B is speaker, C is bluetooth controller, D is power adapter,
E is speaker, F is speaker.
As shown is Picture C, port (1)(2) connect to the negative pole of speaker in Picture A,
port (3)(4) connect to the positive pole of speaker in Picture B,port (6)(7) connect to the
positive pole of speaker in Picture E,port (8)(9) connect to the positive pole of speaker in
Picture F,port (5) connects to power adapter in Picture D’s D1port.
Loading...