Pyle PDA8BU User guide

WARNING!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

THE COVER OF THIS UNIT. THERE ARE NO USERSERVICEABLE PARTS

INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.

The lighting ash with arrow head symbol within an equilateral triangle is intended
to alert the user to the presence of “DANGEROUS” voltage within the product’s
enclosure that may be of sucient magnitude to constitute a risk of electric shock
to humans. Users should exhibit extra safety when this symbol appears in this
instruction manual and follow all precautions as they are stated.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
this manual.

1. Read these instructions thoroughly before using this item.

2. Keep these instructions for future reference.

3. Heed all warnings.

4. Follow all instructions.

5. WARNING: To prevent re or electric shock, do not expose this equipment to rain
or moisture. Do not store or operate this product near any liquids.

6. Clean only with a dry cloth.

7. Do not store or operate this product near any heat sources such as radiators, heat
registers, stoves, or other apparatuses (including ampliers) that produce heat.

8. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a round grounding prong. The wide blade or third prong is
provided for your safety. If the provided plug does not t your outlet, consult an
electrician for the replacement of the obsolete outlet.

9. Protect the all wires connected to this unit from being walked on or pinched,
particularly plugs and the point where they exit from the unit. When removing the
cord from the power outlet, remove it by holding the plug not by pulling the cord.

10. Unplug the unit during lighting storms or when unused for long periods of time.

11. When wiring this unit and all other equipment used in connection to this unit
make sure that all of your equipment is turned OFF.

12. Once installation and wiring is complete power on all your equipment with the
volume and level controls turned DOWN. Once all the equipment is ON slowly
raise the volume or level controls to their proper positions.

www.PyleUSA.com

2

13. When grounding this unit, be sure to do so correctly, so as not to defeat the
built-in grounding in this unit.

14. Before placing, installing, rigging, or suspending any product, inspect all hardware,
suspension, cabinets, transducers, brackets and associated equipment for damage.
Any missing, corroded, deformed, or non-load rated component could signicantly
reduce the strength of the installation, placement or array. Any such condition
severely reduces the safety of the installation and should be immediately corrected.
Use only hardware which is rated for the loading conditions of the installation
and any possible short-term, unexpected overloading. Never exceed the rating
of the hardware or equipment.

15. Consult a licensed, professional engineer regarding physical equipment
installation. Ensure that all local, state and national regulations regarding the
safety and operation of equipment are understood and adhered to.

16. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

Introduction

To get the most from the PDA8BU Multi-Channel Bluetooth Home Amplier,
it is recommended that you review all of the information provided in the instruction
manual before operating the equipment.

FRONT & BACK PANEL

1

3 4 5

18 19 20

21

11

2

22

6

23

7 8 9

14 15

13

24

10

16

www.PyleUSA.com

12

17

25

3

1. POWER ON/OFF SWITCH: Press this button to power ON/OFF the unit.

2. LED DISPLAY SCREEN: Displays the input sources and track time information.

3 SD CARD SLOT: Insert an SD card in this slot for playing Mp3 les.

4. USB PORT: Insert an USB mass storage device for playing Mp3 les.

NOTE: The USB input is ONLY mean to connect to a USB ash drive (thumb drive).

Connecting an MP3 player or computer directly to the USB ash drive input will

result in the unit failing to play the audio from those devices.

5. CONTROL BUTTONS

A. REPEAT BUTTON: This button allows you to play the music in repeat mode

(All or Single mode)

ALL: All tracks in the USB or SD CARD will be repeated in order without interruption.

SINGLE: Repeat the track that was current playing.

B. PREV BUTTON: Use this button to select each function depending on these three

dierent modes as below.

• In USB/SD/BLUETOOTH mode, use to select previous track.

• In FM mode, use to select pervious channel.

• In FM/BLUETOOTH mode, press and hold this button will decrease the volume.

www.PyleUSA.com

4

C. PLAY/PAUSE BUTTON: Each press of the PLAY/PAUSE BUTTON causes the

operation to change from play to pause or from pause to play in the USB/SD mode

or BLUETOOTH mode.

• Press the PLAY/PAUSE BUTTON one time to auto scan all frequencies from

87.5MHz to 108MHz in FM mode, the unit will auto store the channels.

D. NEXT BUTTON: Use this button to select each of function depending on these

three dierent modes as below.

• Select next track in USB/SD/BLUETOOTH mode

• Select next channel in FM mode

• In FM/BLUETOOTH mode, press and hold this button to increase the volume.

E. MODE BUTTON: Press this button to select one of play mode with USB/SD mode,

FM mode and Bluetooth mode, automatically set in USB/SD mode after turn on

the unit, automatically play mp3 les after inserting a USB ash driver or SD card.

STEPS FOR CONNECTING WITH BLUETOOTH DEVICE

Once paired you can play music from your Bluetooth device.

You can also use the control buttons on the unit to select the tracks from your

Bluetooth device.

A. Press MODE button to select Bluetooth mode, displays BLUETOOTH on the screen.

B. Search for the bluetooth device and nd the bluetooth name “BT”

C. Select the “BT” bluetooth name and wait for the device to pair.

D. The unit will make a sound conrming that the devices have successfully paired.

www.PyleUSA.com

5

6. MUSIC VOLUME CONTROL KNOB: Turn this knob to adjust the master music

volume.

7. BALANCE: Turn this knob to adjust the volume level of the L/R channel

8. BASS: Turn this knob to adjust the low frequencies level of music

9. TREBLE: Turn this knob to adjust the high frequencies level of music

10. LOUD: Press this button to boost the bass and treble at low volume levels

11. MAIN VOLUME CONTROL: Turn this knob to adjust the volume of the main speaker

12. SURROUND VOLUME CONTROL: Turn this knob to adjust the volume of the

surround speaker

13. ECHO VOLUME CONTROL KNOB: Turn this knob to adjust the microphone echo

volume level

14. MICROPHONE BASS CONTROL KNOB: Turn this knob to adjust microphone

bass level

15. MICROPHONE TREBLE CONTROL KNOB: Turn this knob to adjust microphone

treble level

16. MICROPHONE INPUT 1/2 JACK: MIC 1/2 Input Jack for connecting with

microphones

17. MICROPHONE 1 VOLUME CONTROL KNOB: Turn this knob to adjust the

volume of microphone 1/2

18. AUDIO INPUT RCA CONNECTOR: Connect the audio output jacks of DVD/CD

to these jacks

19. REC OUTPUT CONNECTOR: To connect with other electronic equipment audio

input with these jacks

20. SUBWOOFER OUTPUT: To connect with a active subwoofer through these jacks

21. SPEAKER OUTPUT: Speaker binding post terminal to connect with the main

speaker

22. CENTER SPEAKER OUTPUT: Speaker bindling post terminal to connect with the

center speaker

23. SURROUND SPEAKER OUTPUT: Press type terminal to connect with the

surround speakers.

24. FM ANTENNA CONNECTOR: Connect with FM antennas.

25. POWER SUPPLY: Connect to AC power socket.

The unit is working with AC-230V only.

www.PyleUSA.com

6

REMOTE CONTROL

1. Press this button to turn ON or OFF the MP3

2. Press this button to select the playing mode, such as USB/SD/FM/BLUETOOTH

3. Press this button to mute the music

4. Press this button to select a preset sound eect

5. Play and pause function for MP3

6. Presss this button to increase the volume

7. Press this button to select the previous track or station

8. Press this button to select the next track or station

9. When in FM mode, press this button for auto scanning

10. Press this button to decrease the volume

11. Press the numbers to select the tracks directly.

The Unit takes 1-2 seconds to response in USB or SD mode.

12. Press this button for single or all tracks repeat function

1

11

2
3
5

7

4
6

8
10

9

12

www.PyleUSA.com

7

Features:

• 5.1 Genuine Channel Amplier System

• Big VFD screen display with Frequency level light

• Built-in Bluetooth for Wireless Audio Streaming

• Auto Scan, Memory, Radio Station PREVIOUS/NEXT Control

• MP3 Digital Audio File Playback

• SD Memory Card & USB Flash Drive Readers

• (2) 1/4’’ Audio Input Jacks (Mic1, Mic2)

• Microphone ECHO/Volume/Treble/Bass Control

• Music Treble/Bass/Balance Rotary Control

• Central and Surround Volume Control

• Light-on General Music Rotary Volume Control

• Loudness On/O Button

• (2) AUX Input Jack

• (1) Line Output

• (1) Subwoofer Signal Output

• Main Speaker Banana Binding Post Connector

• Surround and Center Speaker Press-type Connector

• 115/230V Switchable Power Supply

What’s in the Box:

• (1) Amplier Unit • (1) Remote Control • (1) FM Antenna

Bluetooth Connectivity:

• Built-in Bluetooth for Wireless Music Streaming Compatible with All of Today’s

Latest Bluetooth Devices and NAS

(iPhone, Androids, Smartphones, iPad, Tablets, etc.)

• Bluetooth Version: 5.0

• Bluetooth Network Name: ‘BT”

• Bluetooth Network Password: No

• Wireless Range: Up to 40Ft

www.PyleUSA.com

8

Technical Specs:

•

RMS Power Output: 35W*2+20W+15W*2 RMS

• Frequency Response: +/-3dB, 100Hz-20kHz

• Impedance: 4/8/16 Ohm

• T.H.D.: <1.0%

• S/N Ratio: >90dB, Mic <80dB, Line>80dB

• Microphone sensitivity: 10mV

• USB/SD Flash Memory Support: Up to 32GB

• Digital File-type Playback Support: MP3, WMA, WAV

• Remote Control Battery: (1) x 3V Lithium Button Cell CR2025 (Included),

• Power Supply: 115V/230V Switchable

• Dimensions (L x W x H): 16.9’’ x 9.4’’ x 2.76’’ –inches

www.PyleUSA.com

9

Questions? Issues?

We are here to help!

Phone: [phone]

Email: [e-mail]