Pyle PBT55D Declaration Of Conformity

PBT55D

Stereo HeadsetBluetooth

Index

1 How to open the folded headset and wear ..........................................................1

2 Charging and recharging the battery ....................................................................2

3 Low-battery indication .................................................................................................3

4 Turning on / Turning off the Headset and the Audio Adaptor ...............................3

...................................................................................4

. Stereo Headset paired with mobile phone Guide [ A ]..............5

1. Pairing ....................................................................................................5

2. Answering incoming calls / Rejecting incoming calls ................................6

3. Ending calls .......................................................................................................6

4. Last number redial ...............................................................................................6

5. Adjusting speaker volume .......................................................................6

6. Activating voice dialing ..........................................................................................6

7. Transfer call ........................ .................................................................7

. Stereo Headset paired with Stereo Audio Adaptor Guide [ B ] ........................7

1. Pairing .................................................................................................................7

2. Listening to music ...............................................................................................7

. Stereo Headset paired with USB Dongle Guide [ C ] ......................8

1. Pairing .................................................................................................................8

2. Listening to music ...............................................................................................8

. Stereo Headset paired with enabled PDA Guide [ D ] ....................9

1. Pairing .................................................................................................................9

2. Listening to music ...............................................................................................9

. Stereo Pendant paired with Audio Adaptor and

mobile phone Guide [ A & B ] ...........................................................10

1. Pairing ...............................................................................................................10

2. Listening to music .............................................................................................10

3. Monitoring mobile phone calls ............................................................................10

. Stereo Headset paired with USB .

dongle and mobile phone Guide [ A & C ] ........................11

1. Pairing ...............................................................................................................11

2. Listening to music ..............................................................................................11

3. Monitoring mobile phone calls ...........................................................................11

. Stereo Headset paired with .

enabled PDA and mobile phone Guide [ A & D ] ...............12

1. Pairing ...............................................................................................................12

2. Listening to music .............................................................................................12

3. Monitoring mobile phone calls ...........................................................................12

Accessories Table ................................................................................................12

FCC Interference Statement ..................................................................................13

Declaration of Conformity ......................................................................................14

．．

. .

Seven possible User Scenarios

III

VII

Bluetooth

Bluetooth Bluetooth

1 3

Charging andrecharging the battery Thank you for buying the new PBT55D Stereo Headset and the new BT65N StereoAudio Adaptor pack. Before first time use,it is important to charge thebattery of each of themfor 6 hours. During recharging, the LEDshows a steady redlight. When the batteryis fully charged,the Red LEDis off.

Bluetooth

Headset

AudioAdaptor

ACAdaptor

DC Socket

BT65N

h StereoAudio Adaptor(optional)Bluetoot

LED

Or alternatively, connect the USB charging cable and the Y-cable together. And then, connect the twoends of the Y-cable to theHeadset’s and the Audio Adaptor’s DC socket. Make sure the USB charging cable is connected to the computer USB port providing500 mAfor optimal chargingresults.

Low-battery indication When the battery is low, the LED of the Headset or that of the Audio Adaptor will flash red instead of green. When the battery level is too low, the Headset or the Audio Adaptor willautomatically power off.

Headset

AudioAdaptor

DC Socket

USB Charging

Cable

500mA

USB Port

Turningon / Turningoff the Headsetand theAudio Adaptor When the Headset or the AudioAdaptor is powered off, press and hold till the LEDflashes green, whichindicates the Headset orthe AudioAdaptor is powered up. When the Headsetor the AudioAdaptor is powered up,press and , the LEDwill keep redfor a whilethen off,which indicates itis powered down.

button

hold button

c. If the pairing is successful, the LED will flash green, which indicates it is in

Standby Mode and ready to answerand receive mobile phone calls from it. If pairing doesnot occur as expected,turn the Headset andthe mobile phone off. Waitfor 10 secondsand repeat thepairing process fromthe beginning.

2. Answeringincoming calls /Rejecting incoming calls a. When an incoming callis present, a ringtone will be heardfrom the earpiece of

the Headset. Press PLAY button will answer the call. Press button will reject thecall.

b. If the Headset is connected with your mobile phone and

another transmitter such as the Audio Adaptor simultaneously and you are listening to the music using the earpiece, a ring tone will prompt you. Press PLAYbutton will answerthe call. Press buttonwill reject the calland you willcontinue listening tothe music.

3. Ending calls a. While acall is insession, press button will endthe call. b. If the Headset is connected with your mobile phone and

another transmitter suchas the AudioAdaptor simultaneously, press STOPbutton will endthe call andyou will continuelistening to themusic.

4. Last numberredial a. While the Headset and mobile arein Standby Mode, press and hold

the button for 2second to redialthe last dialednumber.

b. If the Headset is connected with your mobile phone and

another transmittersuch as theAudio Adaptor,press and holdthe Button for2 second to redialthe last dialed number. Press STOP buttonto end thecallasnormal.

5. Adjustingspeaker volume a. While a call is in session, pressing and releasing VOL + / VOL - buttons will

adjust thespeaker volume.

b. While the Headsetis playing music, pressing / releasing

VOL+ /VOL -buttons will adjustthe speaker volume.

6. Activating voice dialing

When the Headset is in standby mode, press and hold the button for 2 seconds until a longbeep is heard. The Headset is connectingto your mobile phone for voice dialing function. If the connection is successfully made, the phone will ask for the name of the person you wish to call. The call will be executed in a few seconds. If the connection is failed, the Headset will beep and go back to standby mode. Before the Headset entering into voice dialing mode, makesure the voicedialing function ofthe phone isenabled.

While the Headset is playing the music, continuously pressing the button will stop the music playing and a long beep will be heard, indicating that the Headsetis connecting with mobile phone for voice dialing function. If the connectionis successfully made, the voice dialing canbe executed according to the mobilephone’s menu operations. (If the connectionis failed, theHeadset will beep and goback to musicplaying.)

[Advance function]

(ADVANCE FUNCTION)

Bluetooth

Remarks: Voicedialing functionis not supportedin Sony EricssonK750i

I. Stereo Headset pairedwith Bluetooth mobilephone Guide[A]

1. Pairing

a. While the Headset is powered off,press and button for 4 seconds. The

LED will flash red and green alternatively, which indicates the Headset in Pairing Mode. The PairingMode will lastfor one minute.

b. Follow the operating instructions of your mobile phone to start the

pairing process. Typically,this has to be done by going to a setup or connect menu andthen selecting theoptions to discover devices. It may take several seconds to establish a connection. Your phone’s display should indicatethat it has foundthe model name“PBT55D”; and prompt youfor a passkeyor PIN. Enter a sequenceof “0000”.

Bluetooth

hold

USB dongle

[C]

Bluetooth

Bluetooth enabled PDA

[D]

How toopen the foldedheadset and wear

1)Unfold the foldedheadset until they are fully extended to the opened position(see Figure.1 andFigure.2 )

3)Wear the headset (see drawing Figure. 4) with the headband behind your head. Adjust theposition until youfeel the mostcomfort.

2)Rotate theearcups until theyare in thelocked position (seedrawing Figure.3)

Figure. 1 . 2Figure

Figure. 3

Figure. 4

Backward Reject thecall

! Voice dialing

6. VOL+

3. VOL-

Power On/Off Play Stop Pairing

! Volume down

Forward Call transfer

! Redial the lastnumber

! LED

! Volume up

Environmental

friendly

PLAY/STOP

Seven possibleUser Scenarios:

There areseven (7) userscenarios for youto enjoy theBluetooth wireless convenience:

Headsetpaired

with

Yes

[A]

Bluetooth

mobile phone

(Not Provided)

Yes

[B]

AudioAdaptor

(optional)

[C]

USBBluetooth

Dongle

(optional)

Scenario

VI Mobile phone calls and music from the

audio source (Notebook/Desktop PC, etc.)

that theBT USBdongle is connectedto.

I Mobilephone calls only.

II Music only from the audio source (MP3,

iPod, etc.) that the Audio Adaptor is

connected to.

III Music only from the audio source

(Notebook PC, desktop PC, etc.) that the

Bluetooth USBdongle is connectedto.

IV Musiconly from thePDA /mobile phone.

V Mobile phone calls and audio source

(MP3, iPod,etc.) that theAudio Adaptor is

connected to.

VII Mobile phone calls and music from the

PDA/ mobile phone.

[D]

Bluetooth enabled

PDA/ mobile phone.

withA/V profile (Not

Provided)

400.00 mm

BluetoothAudio Adaptor

[B]

Bluetooth mobilephone

[A ]

Bluetooth

Stereo

Headset

270.00 mm

10 12 14

9 11 13

III. StereoHeadset paired withUSB Bluetooth DongleGuide[C]

1. Pairing a. While the Headset is powered off,press and hold button for 4 seconds. The

LED will flash red and green alternatively, which indicates the Headset in Pairing Mode. The PairingMode will lastfor one minute.

b. Put the Headset, theUSB dongle and the PCclose to each other,

c. Insert the USB Dongleinto a USBport of your NotebookPC / desktop

PC to start the pairing process. Typically,this has to be done by executing a

application program supporting the Audio Visual (A/V) Profile, to discover the Headset. It may take some time to search it depending on the number of devicesnearby.

0.5

to 3meters.

d. Your PC willdisplay the model name “PBT55D”if it has foundthe Headset; and

ask fora passkey. Enter a sequence of“0000”. Aftersuccessful pairing, follow the instructionsto establish the connectionwith theHeadset.

e. If the pairing is successful, the LED will flash green, which indicates it is in

Standby Mode and ready to receive audio signals from the dongle. If pairing does not occur as expected, turn the Headset and the PC off. Wait for 10 seconds andrepeat the pairingprocess from thebeginning.

2. Listening tomusic a. Put theearpiece on. b. Start a music applicationsuch as Windows Media Play or RealOne Player and

play themusic; you willlisten to thestereo music fromthe earpiece.

c. The speaker volume of the earpiece can be adjusted by pressing the VOL + /

VOL- buttons.

d. While listening to music (forexample, song 2), pressthe Headset’s FORWARD

>> buttonwill skip tonext song (forexample, song 3);press the BACKWARD<< button will replay the current song (for example, song 2). Double press the BACKWARD button will playthe last song (for example, song 1). This remote control function is supported only by the AVRCP profile of your application program.

e. Turn the Headsetoff after use.

Bluetooth

d. The speaker volume of theearpiece can be adjusted bypressing and releasing

the VOL+ /VOL- buttons.

e. Turn the Headset off after use. The Audio Adaptor will be turned off

automatically. Next time, youdon’t need to pairthem again. Turn them on,and then they will be paired automatically and ready to transmit music from the audio source.

IV. Stereo Headsetpaired with Bluetoothenabled PDA Guide[D]

1. Pairing a. While the Headset is powered off, press and hold button for 4 seconds. The

LED willflash red andgreen alternatively,which indicates theHeadset in Pairing Mode. The Pairing Modewill last forone minute.

b. Put the Headsetand the enabled PDA (with A/Vprofile) close to each

other,

c. Follow the operation instructions of your enabled PDA (with A/V

profile) to startthe pairing process. Typically,this has to be done by going toa setup orconnect menu todiscover the Headset. It maytake some time tosearch it dependingon the numberof devices nearby.

d. Your PDA willdisplay the model name“PBT55D” if ithas found the Headset;and

ask for apasskey. Enter a sequenceof “0000”. After successfulpairing, follow the instructionsto establish the connectionwith theHeadset.

e. If the pairing is successful, the LED will flash green, which indicates it is in

Standby Modeand ready to receive audio signalsfrom the PDA. If pairing does not occur as expected, turn the Headset and the PDAoff. Wait for 10 seconds and repeatthe pairing processfrom the beginning.

0.5 to3 meters.

2. Listening tomusic a. Put the earpieceon. b. Play the music onthe PDA as normal;you will listen tothe stereo music fromthe

earpiece.

c. The speaker volume of the earpiece can be adjusted by pressing the VOL+/

VOL-buttons.

d. While listening to music (for example, song 2), press the Headset’sFORWARD

>> buttonwill skip to next song(for example, song 3);press the BACKWARD << button will replay the current song (for example, song 2). Double press the BACKWARD button will play the last song (for example, song 1). This remote control function is supported only by the AVRCP profile of your Bluetooth application program.

e. Turn the Headsetoff after use.

Bluetooth

Advancefunctions: The following userscenarios provide youa true wirelessfreedom to monitor the mobile phonecall status whileyou

areenjoying stereo musicat the sametime. You don'teven need to

putdownyourearpiece.

V. StereoHeadset pairedwith

AudioAdaptor and Bluetoothmobile phone Guide

[A&B]

1. Pairing a. Follow thePairing process [B ] topair the Headsetand the AudioAdaptor. b. After successful pairing, turn the Headset off. The Audio Adaptor will turn off

automatically.

C. Follow the pairing process [ A ] to pair the Headset and the mobile

phone. d. After successfulpairing, turn onthe AudioAdaptor. e. All threedevices are inStandby Mode andthe LED’s shouldflash green.

2. Listening tomusic a. Follow theListen to musicprocess [ B] to enjoythe music.

3. Monitoring mobilephone calls a. Follow the ] in[ A] to monitorphone calls.

Bluetooth

[Advance function

BluetoothAudio Adaptor

[B]

Bluetoothmobile phone

[A]

Bluetooth

Stereo Headset

*Advance functions arenot supported inSony Ericsson T610,T630

VII. Stereo Headset pairedwith

Bluetoothenabled PDA andBluetooth mobile phoneGuide

[A&D]

1. Pairing a. Follow the Pairingprocess [ D] to pair the Headsetand the enabledPDA. b. Aftersuccessful pairing, turnthe Headset off. c. Follow the pairing process [ A ] to pair the Headset and the mobile

phone.

d. After successful pairing, please follow the PDA application program

instructions to re-establish connection between the PDA and the Headset.

e. Allthree devices arein Standby Modeand the LED’sshould flash green.

2. Listening tomusic a. Followthe Listen tomusic process [D ] toenjoy the music.

3. Monitoring mobilephone calls a. Followthe in [A ]to monitor phonecalls.

Bluetooth

[Advance function]

Accessories Table

Description

A/C SwitchingAdaptor

Status

Provided

USB Chargingcable

Optional

Bluetoothmobile phone

[A]

Bluetoothenabled PDA

[D]

Bluetooth

StereoHeadset

VI. Stereo Headset pairedwith

USBBluetooth dongle andBluetooth mobile phoneGuide

[A&C]

1. Pairing a. Follow the Pairing process [ C ] to pair the Headset and the USB

dongle. b. Aftersuccessful pairing, turnthe Headset off. c. Follow the pairing process [ A ] to pair the Headset and the mobile

phone. d. After successful pairing, please follow the PC application program

instructions to re-establish the connection between the

dongle andthe Headset. e. Allthree devices arein Standby Modeand the LED’sshould flash green.

2. Listening tomusic a. Followthe Listen tomusic process [C ] toenjoy the music.

3. Monitoring mobilephone calls a. Followthe in [A ]to monitor phonecalls

Bluetooth

Bluetooth Bluetooth

[Advance function]

USB dongle

[C]

Bluetooth Bluetooth mobile phone

[A]

Bluetooth

StereoHeadset

II. StereoHeadset paired withStereo Audio AdaptorGuide[B]

1. Pairing a. While the Headset is powered off,press and hold button for 4 seconds. The

LED will flash red and green alternatively, which indicates the Headset in Pairing Mode. The PairingMode will lastfor one minute.

b. While the Stereo Audio Adaptor ispowered off, press and hold button. The

LED willflash red and green alternatively,which indicates the AudioAdaptor is in PairingMode. The Pairing Modewill last forone minute.

c. Put the Headset and the Audio Adaptor close to each other, 0.5 to 3 meters.

After a few seconds, their LED’s will turn into flashing green, which indicates successful pairing. Both units arein Standby Modeand ready totransmit audio signal, ormusic from theaudio source.

2. Listening tomusic a. After successful pairing, plug the jack of the Audio Adaptor to the 3.5 mm

socket of any audio source such as iPod, MP3, CD player, Notebook PC, or

others. b. Put theearpiece on. c. Play the musicon the audiosource as normal;you will listen tothe stereo music

from theearpiece.

7. Transfer call a. Totransfer acall from theHeadset to yourmobile phone

If themobile phone isenabled with the Hands-freeprofile, press the button

while thecall is insession and itwill be transferredto your mobilephone.

If themobile phone is enabledwith the Headset profile,follow the instructions

of yourmobile phone manualto do calltransfers.

b. To transfera call fromyour mobile phoneto the Headset

Follow theinstructions of themobile phone manualto do calltransfers

Backward

Forward

Volume

down

Federal CommunicationCommission

Interference Statement

This equipment hasbeen tested and found to complywith the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communications. However, thereis no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the followingmeasures:

- Reorientor relocate thereceiving antenna.

- Increasethe separation betweenthe equipment andreceiver.

- Connectthe equipment intoan outlet ona circuit differentfrom that to whichthe receiver isconnected.

- Consultthe dealer oran experienced radio/TVtechnician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, includinginterference that maycause undesired operation.

FCC Caution:Any changes or modifications notexpressly approved by the party responsible for compliance could void the user's authorityto operate thisequipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructionsfor satisfying RFexposure compliance.

This transmittermust not be co-locatedor operating inconjunction with any otherantenna or transmitter.

IMPORTANTNOTE: FCC RadiationExposure Statement:

Company

SoundAround Inc. 160063rd Street BrooklynN.Y. 11204,USA

Phone:1-800-444-5671 718-535-1800 Fax: 718-236-2400

Bluetooth QualifiedDesign ID: B011669

400.00 mm

270.00 mm

FCC ID:NV6-CS8076

SoundAround Inc.

Pyle PBT55D Declaration Of Conformity

Specifications and Main Features

Frequently Asked Questions

User Manual