Pyle PBMSPG190 User Manual
WARNING:
1. DO NOT place objects on top ofthe device, as objects
may scratch the device.
2. DO NOT expose the device to dirty or dusty
environments.
3. DO NOT insert any foreign objects into the device
4. DO NOT expose the device to strong magnetic or
electrical eld
PBMSPG190
5. DO NOT use the device in the rain.
6. Please check with your Local Authority or retailer for
proper disposal of electronic products.
7. DO NOT disassemble the device. Only a certified
service technician should perform repair.
8. The device has apertures to disperse heat.
DO NOT block the device ventilation, the device may
become hot and malfunction as a result.
• Illegal operation may cause personal injury, which could be fatal.
• Illegal operation may cause damage to property.
FEATURES
Street Blaster Bluetooth Boom Box
Speaker System
Wireless & Portable Stereo Speaker
with Built-in LED Lights (300 Watt)
Troubleshooting
Fault Possible Cause Solution
No sound
Distortion
of sound
Karaoke
does not
work
1. No input sound source
2. Volume is too low
1. Volume too high
2. Speaker may be damaged
1. Microphone plug is not fully
inserted.
2. Microphone switch is not on
3. Microphone volume knob is
at the lowest position
4. Wireless microphone has low
battery
1. Use a better music signal
2. Adjust volume
1. Turn down the volume
2. Repair or replace it
1. Plug microphone properly into
the socket
2. Turn on microphone switch
3. Adjust microphone volume
properly
4. Replace battery
This system includes one microphone and can be used with personal
computers, mobile phone, DVD, VCD, CD, LD, TV, MP3, radio, electronic
piano and any devices which have audio output. Amplier circuit are using
high-performance, high-delity design, coupled with high-quality
professional speaker, in order to make the sound eld to get positioned so
clear, distinct levels eect.
The sound system is outstanding, with deep and powerful bass and the
treble eect is strong, with clear and bright pitch.
The professional electronic frequency division circuit enhances the
machine’s crossover point eect.
Using professional design and manufacture of high-capacity batteries, and
dedicated audio power capacitors, to make the speaker‘s power reserve
margin larger, more stable, better dynamics, higher signal to noise ratio.
MP3
does not
play
1. The song format in the U disc
is incorrect
2. Improper operation has caused
a process disorder
3. USB disc is disconnected
1. Transform song format into
Mp3 format
2. Reboot the machine
3. Insert USB disc properly
Main Technical Specication
Peak Power .............................................................................................. 300W
Input Sensitivity ................................................................................ 2OOmV
Frequency Response ................................................................ 55-160KHz
Power Supply .......................................... AC100V- AC24OV, 60Hz/50Hz
*Above specifications are the specifications of the sampling
machine and are for reference purpose only.
* Due to continuous product development, specifications may
be subject to change without prior notification.
PACKAGE CONTAINS
• 1x Remote Control
• 1x Power Adapter
• 1x Warranty Card
• 1x Carrying Belt
• 1x User Manual
• 1x Wired Microphone
• 1x Audio Cable
CHARGING THE SPEAKER
When charging, connect a matched power adapter to AC100V- AC240V.
Charging time is approximately 6 to 10 hours. Once fully charged unplug
the power supply as leaving a full battery on charge for a long time may
cause damage to the battery.
Battery Charge Indicator:
LED panel has battery status indicator. In the middle of the shape ofthe
battery have three horizontal lines, each horizontal line represents 33% of
electricity remaining. When no horizontal line in the shape ofthe battery or
the shape ashes, please power o and promptly charge to avoid damage
to the battery. There is a battery charging indicator light on the front panel.
When charging,the red light will be on. When it's fully charged, the indicator
light will turn into green.
Warning:
If the battery is under voltage, please fully charge it within 48 hours. If the
speaker has to be left unused for a long time, please let the battery fully
charged, otherwise it will cause damage to the battery. In the process of
playing, keep unit away from high temperature environments, high
magnetic elds and high frequencies.
FRONT PANEL FUNCTIONS
1. Short press to power ON the unit, short press for input selection
(Line / FM / Bluetooth / USB); Long press to power o the unit.
2. Treble / Bass / Mic volume / Mic echo volume / Guitar volume / LED
mode / Music volume selection
When in USB / Bluetooth mode, long press to play / pause the music;
CONNECTIONS
SCAN
FM ANTENNA
When in FM mode, long press to scan FM channel automatically.
3. Wired Mic Slot.
4. Guitar Slot
5. Reset
6. Adjust Music volume, Mic volume, Mic echo volume, LED mode.
7. Short press to select previous song on USB mode. On FM mode, short
press to adjust FM-0.1. Press and hold for 5 seconds to select next channel.
8. Short press to select next song on USB mode. On FM mode, short press to
adjust FM+0.1, press and hold for 5 seconds to select next channel.
10. Line IN- Connect with personal computer, mobile phone, DVD, VCD, CD,
LD, Mp3, radio, electronic piano and any device that has audio output in
AUX mode. On FM mode, connect the audio cable to improve radio signal.
11. Battery Indicator. Red light-charging; Green light-full.
12. DC 13.5V charging interface.
BUILT-IN 4.0 BT FUNCTION
• Press "POWER / INPUT" button to choose the input signal source as BT
REMOTE CONTROL
1. POWER OFF ONLY
2. CHOOSE SIGNAL INPUT
3. INCREASE MUSIC VOLUME
4. MENU
5. PREVIOUS LED MODE
6. DECREASE MUSIC VOLUME
7. NEXT LED MODE
8. MUTE
9. REPEAT
10. PLAY / PAUSE KEY
11. PREVIOUS SONG / CHANNEL
12. NEXT SONG / CHANNEL
1. Under normal circumstances,the remote control
should aimed directly at the receiving window of
the remote control within about 4 meters and
with in a 30° angle.
2. When operating the remote control, aim the
remote control at the receiving window. Ensure
that there are no obstacles between the remote
control and the unit.
3. If the remote receiver is in a position to directly
receive glare, it may fail. In this case, move the
speaker away to avoid direct sunlight.
4. Avoid mixing old and new batteries.
Replace the remote control batteries regularly.
channel when starting the machine.
• Please ensure the BT devices you want to connect is open. Then scan and
connect the speaker with the device. When the connection is succesful,
"tick" tone will prompt. If the speaker can't be connected, please restart
the speaker or the device and try again.
• After the mobile phone and the BT are successfully connected, you can
play music. To ensure continuous stability of the music signal, try to keep
the BT and the mobile phone facing one another.
• This unit supports iPad, iPhone, Samsung, HTC, MOTOROLA, Nokia and
other BT mobile devices wirelessly transmitting audio.
• The BT of the unit can be used up to 10 meters if there are no barriers.
FM FUNCTION
• Press "POWER / INPUT" button to switch to FM radio.
• Press and hold "MENU / " for 5 seconds for automatic searching and
saving.
• Short press " " and " " to select FM station manually.
• Press and hold " " and " " for 5 seconds to select the last or next
channel directly.
Loading...