Page 1
PLMR94W
OWNER’S MANUAL
Mobile Audio System
www.pyleaudio.com
Page 2
2
INSTALLATION.....................................................................................................................3-4
WIRING CONNECTION......................................................................................................... 5
OPERATION............................................................................................................................. 6
LOCATION OF THE KEYS...........................................................................................6
POWER ON/OFF THE UNIT........................................................................................7
MAIN MENU.................................................................................................................. 7
SETUP............................................................................................................................7
RESET FUNCTION.......................................................................................................9
RADIO OPERATION.....................................................................................................9
USB OPERATION....................................................................................................... 10
AV IN OPERATION..................................................................................................... 12
OTHER FUNCTION....................................................................................................12
BLUETOOTH FUNCTION..........................................................................................13
REMOTE CONTROL.......................................................................................................14-15
PERFORMANCE................................................................................................................... 16
Page 3
3
INSTALLATION
Notes:
Choose the mounting location where
the unit will not interfere with the
normal driving function of the driver.
Before finally installing the unit, connect
the wiring temporarily and make sure it
is all connected up properly and the
unit and the system work properly.
Use only the parts included with the
unit to ensure proper installation. The
use of unauthorized parts can cause
malfunctions.
Consult with your nearest dealer if
installation requires the drilling of holes
or other modifications of the vehicle.
Install the unit where it does not get in
the driver’s way and cannot injure the
passenger if there is a sudden stop, like
an emergency stop.
Avoid installing the unit where it would
be subject to high temperature, such as
from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
Page 4
4
INSTALLATION
Page 5
5
WIRING CONNECTION
ISO CONNECTION
Page 6
6
OPERATION.
LOCATION OF KEYS
1. MUTE button
2. Seek down button
3. Power button
4. Seek up button
5. Play/pause button
6. LCD
7. MOD(MODE) button
8. VOL +
9. Reset button
10. VOL -
11. BND(BAND) button
Page 7
7
OPERATION.
POWER ON/OFF THE UNIT
Press the button to turn on/off the unit.
MAIN MENU
Press and hold SETUP/ENTER button on the
remote control for 2 seconds ,Then Press “ ”
button on the remote control will enter this
MAIN menu(see below picture).
Then Press “ / ”button on the remote control
or “ / ” on the front panel to select
desired item then press ENTER/SETUP button
or button of the front panel to setting
corresponding item.
SETUP
Press and hold ENTER/SETUP button on the
remote control for 2 seconds will show the
SETTUP menu. See below:
Press “ / ”button on the remote control or ”
/ ” on the front panel to select System
/Audio/Video/Default item. Then press
ENTER/SETUP button or button of the
front panel to enter corresponding item.
(Press “ ”button on the remote control or
BND button on the front panel to exit to
previous menu.)
SYSTEM SETTINGS
Press “ / ”button on the remote control or ”
/ ” on the front panel to select OSD
Language/Time/Radio Area/Beep. Then press
ENTER/SETUP button button of the
front panel to enter corresponding item.
1).OSD Language：
Now It has English only.
2).Time
Press “ / ”button on the remote control to
select adjusting hour or minute.Then press
“ / ”button on the remote control to adjust
correct time. Press ENTER/SETUP button exit
this item.
Page 8
8
OPERATION.
3). Radio Area
Press “ / ”button on the remote control to
select Europe/America/Russia.
4).Beep
Press “ / ”button on the remote control to
select on/off.
AUDIO SETTINGS
1).Vsurround
Press “ / ”button on the remote control to
select Off/Concert/Church/Passive/Wide/Live.
Press “ ” button on the remote control or
BND button on the front panel to exit to
previous menu.
VIDEO SETTINGS
Press “ / ”button on the remote control or ”
/ ” on the front panel to select Aspect
ratio/Adjust. Then press ENTER/SETUP
button to enter corresponding item.
1).Aspect ratio
Page 9
9
OPERATION.
Press “ / ”button on the remote control to
select 4:3 pan scan/16:9.
2).Adjust
Press “ / ”button on the remote control to
select Brightness/Contrast/Hue/Saturation/
Sharpness.
In every item using “ / ”button to adjust
and press ENTER/SETUP button to exit.
Default SETTINGS
When selecting default function,Press
ENTER/SETUP button to reset to default.
RESET FUNCTION
RESET button must be activated with either
a thin metal object. The RESET button is to be
activated for the following reasons:
Initial installation of the unit when all wiring is
completed.
OPERATION Error symbol on the display.
Note: if press RESET button the unit can’t
work yet. please use a cotton swab soaked in
isopropyl alcohol to clean the socket on the
front panel.
Once the reset button is pressed. All the
memory’s information will be lost!
RADIO OPERATION
1. SWITCHING TO THE RADIO MODE
Press MODE button or in the main menu to
select RADIO mode. The following information
will appear on the display
2. SELECTING THE FREQUENCY BAND
Shortly press BAND button to select desired
band. The reception band will change in the
following order:
FM1FM2 FM3FM4(ORIT BAND)
AM1(MW1)AM2(MW2)
If you selected Russian band the FM4 will
appear. If you selected Europe or American
band. The FM4 will not appear.
3. Selecting Frequency
During radio mode. Shortly press /
button will activate automatic seek function. It
will search up/down a station automatically.
Press and hold / button for 2 seconds
till “MANUAL” appear on the display. The
manual tuning mode is selected. In this mode
Page 10
10
OPERATION.
you can turn up/down a step frequency one by
one till searched a station. If both buttons
have not been pressed for 5 seconds, it will
return to seek tuning mode and “AUTO”
appears on the display.
4. Automatic Story & Program Scanning:
- Program scanning
Shortly press AMS button on the remote
control to scan preset station which is stored in
number 1~6 buttons . And it will hold at each
station for about 5 seconds.
- Automatic memory storing
Press and hold AMS button on the remote
control for 2 seconds. The radio searches from
the 87.5 MHz frequency and checks the signal
strength until one cycle search is finished. And
then some strong stations are stored into the
corresponding preset button. In the first cycle it
will in LOCAL mode to receive the stronger
station. If it stored stations is not full the preset
button. It will searching stations in 2nd cycle in
DX mode.
5. Manually store station and recall
preset station
1) Remote control operation: Received a
station, Press one of the preset button
(1~6) for 2 seconds. The current station
will be stored into the number button.
Shortly press preset button (1~6) you can
listen to the corresponding station.
2) Front panel operation: Received a
station, Press and hold the button till
show SAVE P1 on the display. Press
/ to change the preset number then
press button. The current station will
be stored into the number button. Shortly
press button you can listen to the
preset station 1~6. (From preset station 1
to preset station 6).
6. Stereo on/off:
Press ST button on remote control to select
mono or stereo mode. Sometimes when the
signal is not good. If you change it to MONO
mode the noise will be reduced. Also you can
turn it on/off in SEL menu.
7. Local on/off:
Press LOC button on the remote control to
select LOC or DX mode . In LOC mode the unit
will reduce the receiving sensitivity when you
search station. That means you can receive
the station that sound is good. It will ignores
the station that sound is not good. In DX mode
it will increase the receiving sensitivity when
you search the station. That means you can
receive more stations. Also you can turn it
on/off in SEL menu.
USB OPERATION
1) Playing USB
When insert an USB into the USB jack. The
unit will search the MP3/ WMA files and start to
play.
2) Pause playback
When playing audio/video content, press the
button to puase the playback, press again to
Page 11
11
OPERATION.
resume normal playback.
3) Select Chapter/Track
Press the button during playback to
select the last or next chapter/track to
playback.
4) Stop playback
When playing audio/video content, press the
button on the remote controller or BND button
of the panel to stop the playing.
5) Back to the playing list
a) Remote control operation:
When playing audio/video content, press the
button on the remote controller to stop the
playing and back to the playing list.
Press “ / ”button to select desired song
then press ENTER/SETUP button to play.
(note: Press button will change the
page of the list).
Press and hold button will back to the
previous folder.
Press the button to select the ,
and . press the button to change to
right side. Then Press “ / ”button to
select desired folder and Press ENTER/
SETUP button to enter the folder. Press “
/ ”button to select desired song then press
ENTER/SETUP button to play.
b) Front panel operation:
When playing audio/video content. Press BND
button will back to the playing list. Press BND
button again will back to the previous folder. In
root press BND button will enter the left side.
Press vol+/- to select the , and .
Press back to the right side. Press
button to change the page of the playing list.
Press VOL+/- to select the folder or file. Press
button to enter the folder or start the
playing.
Remark: The icon is for audio files; the
icon is for image files; the icon is
for video files.
: Tap it to pause playback
: Tap it to stop playback
: Tapping one of them can switch on
between the speed levels of fast backward or
forword.(Except image mode.)
: Tapping one of them can select next
or previous chapter/track.
6) Select Chapter/Track with number buttons
When playing audio/video content, press the
0~9 buttons on the remote controller to directly
select and play the track/chapter. Press
10-/10+ button will backward/fast forward to 10
files to play.
7) Playback with speed
During normal playback, press the
button on the remote controller continuously to
fast forwards or backwards. During speed
playback, press button to resume normal
playback.
Page 12
12
OPERATION.
Also press and hold the button of the
panel will active the reverse fast / fordward fast
function.
8) Playback in Scan mode.
a.When playing audio, press the INT button to
play the previous 10 seconds part of each
track. Press the INT button again to resume
normal playback.
b.When playing video/image sources, the INT
button is not available.
9) Playback in Random
When playing video/audio content,press the
RDM button to turn on/off random function.
10) Playback in RPT
When playing video/audio content,press the
RPT button to select RPTONE/RPT DIR/RPT
ALL.
RPTONE: Repeat the same file.
RPT DIR: Repeat all the file of the folder.
RPT ALL: Repeat all file of the USB.
11) Playback in Image mode
When displaying the root menu,
Press the direction buttons to select your
desired FOLDER,then press the ENT or
button to open the FOLDER,or play the
selected file. When displaying the root menu,
you can also use the number buttons to select
the serial number of the file and play the file.
During IMAGE playback, press one of the
/ buttons to change the angle of viewing
picture that is displaying as follows:
:90 degree cw; :90 degree ccw;
During IMAGE playback, press the
button to Pause playing, Press button
return to the folder.
*During IMAGE playback, the following
buttons are not available: RDM, INT.
AV IN OPERATION
Switching to AV IN mode
The AV INPUT jacks is on the back side.
When you connect an audio/video signal
through the AV input. Press MODE button or
you can choose from the main menu to select
AV in mode.
The main menu of the AV IN mode:
OTHER FUNCTION
1. Equalization
Repeatedly press EQ button on the remote
control to select the equalization mode. There
are four kinds of mode as below:
CLASSICROCKJAZZPOPEQ OFF
2. MUTE
Press MUTE button to muting the audio output.
Press it again to recover output.
Page 13
13
OPERATION.
3. LOUD
Press and hold LOUD button on the remote
control to turn on/off the LOUD function.
4. SEL menu
Repeatedly press SEL button on the remote
control will show the SEL menu as below:
Bass---Treble---Balance---Fader---EQ---Loud
---Brightness---Contrast---Hue---Saturation--Sharpness---Vol
In every item you can use / / / button
to adjust the desired value.
5. SCAN
In RADIO mode. Press SCAN button on the
remote control to enter scan mode, the unit will
scan to higher frequency station and keep on
each station for 5 seconds around.
6. OSD
In USB playing press OSD button on the
remote control it will turn on/off some
informations.
BLUETOOTH OPERATION
- PRE-PAIR FOR BLUETOOTH
OPERATION
(i) When use Bluetooth, please make
sure the mobile phone supports Bluetooth
function.
(ii) For the different kind of mobile phone,
Bluetooth emissive power has some
difference. To get the best conversation
quality, it is commended that the distance
between the mobile phone and the unit is
within 3m. And please don’t put any metal
object or any obstacle between the path of
the mobile phone and the unit.
- PAIRING
1) On the mobile phone, select the
Bluetooth set up. (Please refer to the
instruction manual of your mobile phone
on how to operate Bluetooth.)
2) “CAR KIT” should appear in the list on
your mobile phone, please select
“Car KIT”. and then input “0000” ,If it
needs a password.
3) When successful paired, the BT mark
will be displayed on LCD.
- Bluetooth audio (A2DP function)
Press MOD key to switch to PHONE
mode. Then turn on the music player of
your mobile phone and playing a song.
The sound will come out from the speaker
of the unit. Press PAU key of the front
panel to pause/play the song. Press
button or button to select
next/previous song.
Note: When there is a phone is coming in. The
music will be muted. When the phone call is
hanged. The music will be resumed.
Page 14
14
REMOTE CONTROL
Page 15
15
REMOTE CONTROL
1. MODE Press to change the source.
2. POWER Press it to turn the unit ON or OFF
3. BAND: To select FM1, FM2, FM3, MW1, MW2 radio bands.
4. ENTER/SETUP Long press to return to previous menu, short press to
enter next menu;
5. / , / In case of MENU mode, / , / buttons serves as
cursor buttons to select item left/right, ahead/back.
6. EQ Press it to select desired audio equalization
7. Stop
8. SEL Access the Bass, Treble, Balance and Fader setting
9. INT Press INT to INTRO each file. Press again to stop intro
function.
10. Press to pause the playing. Press it again to resume
to play
11. / Press to skip to the next track & press to skip
back one track in navigation mode.
12. 0-9 Inputs the corresponding number.
13. OSD turn on/off some informations in USB mode.
14. SCAN Scanning Button
15. / In MP3 mode. Press / to search forward rapidly &
to search reverse rapidly. In radio mode, use /
for manual tuning.
16 RDM Press it to play all tracks in random order
17.RPT Repeat play.
18.10+/10- Digital selecting button, cooperatively used with numeric
buttons
19. LOC: to choose LOCAL or DISTANCE setting.
20. VOL- decrease (-) the volume level.
21. ST: In radio mode press the button to set the reception
between MONO and STEREO mode
22. LOUD Press and hold to turn on/off Loudness function.
23. VOL+ decrease (+) the volume level.
24. MUTE Press to mute the sound. Press it again to recover the
sound.
25. AMS In radio mode, press it to activate Automatic Memory
Storing/Program Scanning function.
Page 16
16
PERFORMANCE.
FM
AM
MP3/WMA
Tuning range
USA:87.5~107.9 MHz
EUR:87.5~108 MHz
Russia: 65.0~74.0MHz
USA:530~1710KHz
EUR:522~1620KHz
Russia: 522~1620KHz
---
Sensitivity
4uV(S/N=30dB)
63uV(S/N=20dB)
---
S/N ratio
50 dB
45 dB
60 dB
Stereo
separation
>25 dB
---
50dB
Freq. Response
40Hz~12KHz
100Hz~2KHz
20Hz~20KH
z
Loading...