• BABY STROLLER
• JPC18BK
• Applicable Age Grade: From 6 months to 36 months.
• The Maximum Load: 15kgs
WARNING!
Read the instruction carefully before use and keep them for
future reference .
OPERATION INSTRUCTION
WARNING:
READ THESE INSTRUCTIONS CAREFULLY BEFORE USiNG AND KEEP
FOR FUTURE REFERENCE .
YOUR CHILD'S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW
THESE INSTRUCTIONS.
1. NEVER leave child unattended! This Baby Stroller is suitable for
children
reclined position for New born babies until they can sit up unaided .
2. Please check and make sure all the components are securely installed
and well connected before using .
3. The harness must be used correctly.
4. Do not use the baby stroller on stairway, rough surface or in any
dangerous area.
5. Overload or incorrect folding using the incorrect spare parts, might
cause damage and make this Baby Stroller unsafe.
6. The maximum load of this Baby Stroller is 15kg , the maximum load
of basket is 2.5kg , please avoid overloading.
7. This product is not suitable for running and skating.
8. Ensure all users are familiar with the products operation. It should
always open and fold easy, if it does not, do not force the mechanism.
Stop and read the instructions.
9. Do not use your pushchair in a manner for which it is not designed.
10. DO NOT allow children to climb into stroller unassisted, play with or
hang onto your Baby Stroller.
11. Always apply the brakes when stationary and hold on to your
Baby Stroller when close to moving road vehicles or trains. Even
with the brake on, the draught from the vehicle may move the
stroller.
12. Never carry a second child on your pushchair
6 months to 36 months. Recline the seat to the most
PARTS LIST
OPERATION INSTRUCTION
Folding Lock
WARNING:
ENSURE THAT ALL LOCKING DEVICES ARE ENGAGED BEFORE USE
1
www.PyleUSA.com
2
www.PyleUSA.com
OPERATION INSTRUCTION
OPEN THE BABY STROLLER:
Open the folding lock, then lift up the handle bar and move forward the
stroller until you hear 'click', make sure the frame is opened in full
position.
OPERATION INSTRUCTION
Quick Release Button
FITTING THE FRONT
WHEELS:
Place the front leg plastic into
the front wheel housing until it
clicks into the position.
To remove the wheels, Press
the quick release button to
downward the wheel to
Press Quick Release Button
release.
WARNING:
ENSURE THAT ALL LOCKING DEVICES ARE ENGAGED BEFORE USE
USING THE HOOD:
To raise the hood, lift the top of the hood forward then push down the
hood until it locks in place.
To lower the hood , lift the hood then push the top of hood back into
it's folded position.
ADJUST THE HARNESS:
Release: Press down the button on the buckle, pull it to open.
Fastening: Insert the two latches into the buckle on both sides
until they click and locks in place.
ADUSTING THE HEIGHT
OF THE SEAT:
To raise or lower the seat, you
can adjust the position handle
located behind the seat. To
lower the backrest pull the
button ring downwards and
slide the adjuster until the
seat is in the desired postion.
BRAKE SYSTEM:
Step the brake pedal to stop
the stroller. Lift up the brake
pedal to release the stroller.
www.PyleUSA.com
3
4
www.PyleUSA.com
OPERATION INSTRUCTION
FIXING DIRECTION AND
ROTATING THE FRONT
WHEELS:
Lift up the front wheel swivel
lock for xed wheel direction,
press it down to rotate the
wheel freely.
OPERATION INSTRUCTION
FOLDING THE STROLLER:
Move the secondary lock to the left and pull the folding trigger button
upward and then pull downward the stroller to autolock.
Quick Release
Button
FITTING THE REAR WHEELS:
Push the rear leg frame into the plastic rear wheel housing. Ensure the
quick release button on the legs located at the holes in the mounts and
CHECK if it is securely attached. Press the quick release button and pull
the rear axle assembly to clear.
5
MAINTENANCE
1. To ensure your baby's safety, please check and keep good
maintenance of the Baby Stroller periodically.
2. Please use a brush to clean the covers, use neutral detergent solution
or the best natural soap powder for cleaning.
3. Please periodically check the product in case of loosing parts, broken
components or wearing threads. Change damaged parts if necessary.
4. Please operate or disassemble the Baby Stroller according to the
instruction manual.
6
www.PyleUSA.com
www.PyleUSA.com
Loading...