Model PM15LCD：
4:3 DIGITAL LCD-Monitor
OPERATING MANUAL
15 LCD MONITOR
2
2
6
SAFETY
PRECAUTIONS
2
1
PREFACE
FRONT BACK/SIDE
CONNECTIONS
OF LCD
4
3
INSTALLTION
DRAWINGS
4
5
5
6
6
Y Pb Pr Connection
7
REMOTE CONTROL
FUNCTIONS
5
8
ConnectionS-Video
PC-RGB Connection
7
CONFIGURATION
OF THE LCD
12
13
1
Contents
Power Cable Connection
Connecting Antenna
Video Connection
Remote control instructions in TV mode
Battery Installation
Battery Usage Caution
9
9
TROUBLESHOOTING
AND ADVICE
SPECIFICATIONS
9
10
10
10
11
11
Enter picture menu
Enter sound menu
Enter Timer menu
Enter other setting menu
2
1. PREFACE
Thank you for buying this TV ! Please read this manual thoroughly before operating the monitor.
Make sure the monitor was not damaged in transit. Should the monitor is damaged, do no install
it and contact your dealer. Check that you have all the accessories according to the model.
2. SAFETY PRECAUTIONS
Preparation
Power cord and cables must be properly routed and protected to prevent
people from stepping on them and causing the monitor to fall.
Minimumdistances
10cm
20cm
10cm 5cm
Put the monitor on a stable surface.
Do not place any material on the monitor.
Do not block or cover the ventilation openings on the monitor
If you have a wall mount, check that it is steady
Connexion cables
3
Heating sources and humidity
Keep the monitor dry and away from humidity.
Keep the monitor away from heat sources
Cleaning and maintenance
Unplug the monitor before cleaning it. Do not use solvents or liquids
to clean the monitor.
Only clean the monitor with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those
suggested by
the manufacturer. Using inadequate spare parts can lead to electric
shocks, short-circuits fire or other incidents.
Departure in holidays
Unplug the LCD during lighting storms or when unused for long periods
of time.
4
Front View
Back View and Control Connections
3. FRONT BACK/SIDE CONNECTIONS OF LCD
1.Press POWER Switch on the LCDTV when“”
at standby mode or vice versa.
2.Press UP or DOWN to“”“ ”select option in
menu
3.Press V+ or V- to increase or decrease“”“”
the sound level.
4.Press MENU to bring up the main menu to“”
the screen
5.Press SOURCE to select the input source“”
1.DC 12V IN: DC input socket
2.VGA: Connect the PC-RGB output jack of PC
3.YPbPr: Connect the DVDYPbPr output jack of
the DVD Player
4.PCAUDIO INPUT: Connect theAudio output
jackofPC
5.VIDEO: Connect the Video output jack of DVD
or VCR
6.AUDIO LR INPUT: Connect the left and right
Audio output jacks of DVD or VCR for VIDEO /
S-VIDEO / YPbPr
7.S-VIDEO: Connect the S-VIDEO output jack
ofDVDorVCR
12 3 456 7
Loading...