PXN PXN-6603 User Manual

User Manual

PXN-6603

1) Speedy Controller 2) Smartphone Clip

5) Product Manual

3) Micro-USB to USB Cable

1) Enable Apple device Bluetooth function, it’ll search for devices automatically;

2) Press and hold the controller “Power” button for 3 seconds (4 LED lightning flash
slowly), then press and hold “ Bluetooth” button for 3 seconds, the controller
enters searching status (4 LED lightning flash quickly) and “Speedy Gaming
Controller “will appear on the Apple device.

3) Click the name o f the device, the controller enters connection status through
Bluetooth (Bluetooth LED indicator will become solid after connection is “OK”). In
the same time, the phone will displays “Speedy Gaming Controller is collected”

SPEEDY

WIRELESS CONTROLLER

The adjustable clip length is from 50mm to 90mm, maximum can hold 6 inches Phones,
compatible with most mobile phones.

4. Gamepad battery indication

1. User could login ‘PXN GAME LIST' website:www.e-pxngame.com to obtian
compatible games.

2. This controller fully suppports the MFi games from the App store.

1) Sleep Mode (Power save)
Without any axis or button actions within 10 minutes, the controller will power off

automatically; Not connected in 90 seconds after powering on, the controller will
power off

2) Wake up method
Press and hold the controller “ Power” button for 3 seconds to power on, the
controller and the Apple device will connect automatically in 5 seconds, and all LED
indicators return to previous status before powering off.

3) Power On / Off

1) In connection or disconnection status, the controller can be powered off by

Pressing and holding the “ Power” button for 3 seconds

2) In powering off status, the controller can be powered on by pressing and holding

the “ Power” button for 3 seconds

4) Low Voltage Alarm Function

When the battery voltage is below 3.3V ± 0.2V, press power button and all

indicators flash 5 times (1 Hz), then back to connection display status, this is low

voltage alarm, please charging in time.

5) Re-connection

Apple devices already connected with the controller before, you just need to press

and hold the controller “ Power” button for 3 seconds to power on, it’ll reconnect with

the Apple device automatically in 5 seconds, and all LED indicators return to

previous status before powering off.