PX376 is a multimedia player controlled by DMX protocol. The player allows you to play the video
files in Full HD, audio files and images.
In case of the loss of DMX signal, it can operate independently according to the pre-programmed
settings. The device is equipped with DMX input and output, 4 USB ports, HDMI and Micro USB
interfaces.
The device comes with a PC application which allows you to create configuration and prepare
USB memory on which media files are stored.
Micro USB interface is used to power the device (using the included power supply unit).
Connect USB memory with a configuration file and files to be played to one of the USB ports.
3
1. GENERAL DESCRIPTION
PX376 media player is powered by low voltage of 5 V; however, please observe the following
safety rules during its installation and use:
1. The device can be connected only to the power supply of 5 V DC with a load capacity
compatible with technical data. It is recommended to use the power supply unit included with
the device.
2. Protect all cables against mechanical and thermal damage.
3. In case of failure of any of the cables, it must be replaced with a cable of the same technical
data and attestations.
4. Only a shielded cable can be used to connect the DMX signal.
5. All repairs and connections of DMX signal can only be carried out with power disconnected.
6. PX376 must be strictly protected against contact with water or other liquids.
7. Avoid sudden shocks, particularly dropping.
8. Do not operate the device in rooms with humidity above 90%.
9. The device must not be used in rooms with a temperature below +2 °C or above +40 °C.
10. Clean with a damp cloth only.
11. Static electricity can damage the electronic components of the workstation. Before beginning
these procedures, be sure you are discharged of static electricity by briefly touching a
grounded metal object.
2. SAFETY CONDITIONS