PX B52Q, B62G User Manual

- 1 -

WIFI Bike & Motor Cam
(Motor Accessory)

User’s Manual

B52Q Series

- 2 -

Table of Contents

1. Precautions before Use

2. Introduction

3. Features

4. Package Content

5. Notice for First time use

6. Installation

7. Product Appearance

8. Quick APP Installation Guide

9. APP UI Description

10. Trouble Shooting

11. Specification

12. Series Difference

13. FCC Statement

- 3 -

Precautions before Use

 Recording Mode

(1) Once the system is powered on, it will enter loop recording

mode. (The recording LED is flashing).

(2) To exit the loop recording mode, please stop recording first

 Press [Loop] key  Press Start Recording.

Now, it’s normal recording.

(The recording LED is ON permanently)

 Formatting your SD Card

Long press [Loop/WIFI] key for 8 sec, system will response with

5 sec’s Continuous beep sound.

Press the Snapshot key within 5 sec. will start formatting your

SD card.

Before formatting, please put your system into standby mode.

(Stop recording .)

After SD card formation, system will enter standby mode .

Please restart the system.

 Restore to Factory Default

Long press [Loop] key for 20 sec., system will prompt with

continuous beep sound for 5 sec. Press [Snapshot] key

within 5 sec., the system will restore to factory default settings.

 Hot key for File Backup

Long press [Snapshot] key for 2 sec., the system will back up

the previous and current recording files to your Backup folder in

the SD card.

- 4 -

 Definition of Recording Space

(1) SD card space used by current recording mode. Normal

recording will force deleting loop recording space when the

space is not enough for its operation. When this happened,

system will display warning LED and sound for the insufficient

memory space.

(2) Loop recording cannot delete other files on the memory card.

It can only delete older loop recording files to make room for

the current recording.

(3) If use a brand-new memory card in loop recording, the whole

SD card space can be used for loop recording.

(4) When SD card is full while in loop recording mode. If you stop

recording and try to start normal recording again.

Then system will delete older loop recording files to make

space for the normal recording.

 Suppose a 16G SD card is used for the system, it can save

video files for around 120 min.

Eg. 1: For loop recording only, it can save video files for 120 min

and can do the loop recording continuously.

Eg.2 : For normal recording only, it can save video files up to

120 min, then the “could not recording” LED and warning sound

will prompt by the system. You need to replace the SD card in

order to continue recording.

Eg. 3: If you loop recording for 100 min, then do a normal

recording for around 100 min. Under this case, the system

will use the left 20 min for the normal recording, then delete

older loop recording files total of 80 min to make room to do the

- 5 -

normal recording.

Introduction

B62G is a Camera specialized for Bike & Motor. It equips
with water proof ability, anti-shake and share functions
using WiFi.

Features

 Anti-Shake(EIS + Stable Construction)
 Water Proof Mechanical (IPX5)
 One hot key to back up file to system and smartphone.
 Quick release lock design, with Screw & Quick Release

installation

 HD Video Record (1080@30)
 Support loop / normal recording
 WIFI Transmission for files browsing and sharing.
 Controls Record/Snapshot/File Browsing/File Sharing via

APP

 1 Hours continuous recording
 100% Recording Successful Rate
 Warning for error of SD Card
 APP available
 Low wind resistance, wind diversion design
 Video Noise Reduction
 Auto Date/Time Correction via APP
 Quick Snap Shot button
 Snap Shot while recording Simultaneous
 WDR Technology
 Video & Trail Player in PC

- 6 -

Package Content

< Main unit >

Main unit Handle Bar Holder

Adjusting arm

Quick Release Lock Base &

screw

Adhesive Mount Universal Mount

Charging Cable

User Manual

- 7 -

< Rear Cam >

Rear Cam

Adjusting arm

3M Extension cable

Adhesive Mount Universal Mount

< B-GPS >

B-GPS

- 8 -

Notice For First-Time Use

(1) Please read this manual before using the system. Make sure

the content of the package is complete. If there is anything

missing or damaged, please contact the original dealer right

away.

(2) Please use SD card with Class 10 8GB or above. (The system

can support up to 32GB)

(3) This product does not guarantee to be compatible with all brands

of SD card.

(4) Don’t remove the SD card during recording. Please turn off the

system then remove the SD card. Improper operation will

damage your SD card or cause data lost.

(5) Pro-long operation may cause temperature rise of the Bike cam.

This is normal, no need to worry and use it as usual.

(6) Please don’t repair the system yourself. When it needs repair,

please contact your dealer or our Customer Service Department.

NCC Warning

Article 12 Low-power radio-frequency motors qualified by type

approval shall not change frequency, power or alter the

characteristics and functions of the original design without

permission.

Article 14 The use of low-power RF motors shall not affect the safety

of air navigation and interference with legitimate communications.

- 9 -

Installation

<main unit >

Insert Memory Card.

* Ensure SD Card is inserted in correct direction

* Use only microSD SDHC C10 or higher level

* 8G or higher capacity SD Card recommended

Install Quick Release Lock Base

- 10 -

Install Handle Bar Holder

360 Rotatable Holder mount

- 11 -

Install Adhesive Mount

Install Universal Mount

- 12 -

< Rear Cam >

Install Handle Bar Holder

Blue LED

lights up

- 13 -

Install Adhesive Mount

Install Universal Mount

- 14 -

Install Universal Mount &

Adjusting arm

- 15 -

< B-GPS >

Installation diagram

Installation position

GPS LED flashing
When Positioning
Successfully

- 16 -

Bicycle tube holder

Extended interface

Hand screw

Host & Quick

release base

GPS Receiver

Handle Bar Holder

GPS Plug

Handle Bar

- 17 -

Motor side mirror holder

Host & Quick

release base

GPS Plug

Side mirror holder

GPS Receiver

Hand Screw

Extended interface

Side mirror

- 18 -

Motor adhesive holder

Flat place

Host & Quick

release base

GPS Plug

Side mirror

holde

r

GPS Receiver

Hand Screw

Extended interface

- 19 -

Motor Universal mount

GPS Plug

Host & Quick

release base

Universal mount

GPS Receiver

Hand Screw

Extended interface

- 20 -

Computer program Interface

Computer program name：GVPlayer
Program download area：

1) Trans website download
area(http://www.px.com.tw/file/B52%20video.rar)

2) https://drive.google.com/open?id=0B7GBHEgWCJt0SDR0Ty01
U2J0S1U

Instructions：

- To provide the use of the GPS function recorder.

- When using this function, the computer must be connected to the

Internet.

- After the map function is turned on, the information in the window

will be updated with the video playback.

- The GPS information above provides the user with the

coordinates and speed information.

Video Play

Files Group List

Map
Tracker

Files List

- 21 -

- When there is GPS information in the image file, there will be a

map of the image file on the trajectory.

- Green line represents the whole trajectory.

- Purple line represents the trajectory of the play.

Open and close the map window interface

Users can retrieve their coordinates in Google Earth, Google
Map

Loop play

When the image file is finished

Video Flip

Open File

Pause

Play

Slow Wave

- 22 -

Fast Wave

Screenshot

Stop

Select the map system
Select Language
(English / Simplified Chinese / Traditional Chinese / German /
Italian / Latvian / Polish / Romanian / Slovak / Ukrainian /
French / Korean / Japanese / Spanish / Russian / Portuguese)

- 23 -

Product Appearance

< Main Unit >

1 2

A 3

B 4

C 5

A：Power / Record

Power ON/OFF：Press 2 seconds
Record ON/OFF：Press to start / stop

B：Shutter

Push for photo shot

Long press 2 sec. to backup 2 files

(before/current)

C：WIFI On/Off or

Loop Recording

WIFI ON/OFF：Press 2 seconds
Loop Recording ON/OFF：Push to start / stop

Formatting SD card: Long press for 8 sec.

Restore Factory Setting: Long press for 20 sec.

- 24 -

1: Power LED

Power On: Blue LED ON.

Power Off: Blue LED Off

2: Charging LED

Low Power: Red LED ON.

Charging: Blue LED flashes.

Fully Charged: Blue LED Off

3: Record LED

Recording: Blue LED ON

Loop Recording: Blue LED flashing

Record Off: Blue LED Off

4: Alarm LED

No Memory Card inserted: Blue LED ON

Memory Card full: Blue LED flashing

Memory Card inserted: Blue LED Off

5: WIFI LED

WIFI On: Blue LED ON

WIFI Connected: Blue LED flashing

WIFI Disconnected: Blue LED Off

- 25 -

< Main Unit (IO) >

A

Open the water proof cover to find：

(1)SD Card Slot & (2) RESET KEY

B

Rear Cam port：Connect to Rear Cam

C

Power input:

* DC5V / 1A power supply

* Micro USB (Female) port

D

1/4” Screw Hole (connect to Sport Cam or tripod)

E

Quick Release

F

Speaker

G

MIC

A

B

C

D

E

F

G

- 26 -

< Rear Cam (IO) >

H

Connect to mounting accessories

I

Connect Camcorder

- 27 -

Quick APP Installation Guide

* Download “GoRiding” APP from:
* Play Store for Android System
* Apple Store for iOS System

Step 1. Ensure Front Cam WiFi function is enabled.

* If the WiFi LED indicator is not ON, means WiFi is not

enabled, please push “WiFi” button to enable it.

Step 2. Ensure smartphone’s WiFi has connected to Front Cam.

- 28 -

*Open WiFi of your Smartphone

* For first WiFi connection, select device name "GoRiding"

* Default Password: 1234567890 (10 digits number)

Step 3. Open the APP, tap “CONNECT TO YOUR CAMERA”

icon to enter setting page.

1. Tap “CONNECT TO YOUR

CAMERA” icon

- 29 -

2. We will lead you to Wi-Fi Setting, if

you didn’t connect camera’s Wi-Fi.

3. Select the device you want to

connect to and tap “Connect” to

complete the connection.

* A tutorial window will guide you for

first connection, please follow the

guide to set up.

* Or you can scroll down the screen,

the APP will auto connect the device.

Device SSID/Password rename is required for first
connection

Rename device name and password

 password requires 8 digits

(letters or numbers)

 For the security, please

change the device name

and password

- 30 -

When name/password is confirmed to

change, system will initialize.

APP UI Description

< Main Page >

LIVE VIEW

MY MEDIA

VIDEO REVIEW

Connected

Devices List

Options

- 31 -

Notes：

1. Enter “CONNECT TO YOUR CAMERA”，select Device.

< Options>

MOMENTS

MY MEDIA

MAP

HOME

- 32 -

< Connected Device List >

- Left Windows：Select Device name (GoRiding-xxxxxx).

- Rightwindows：Select Done.

SETTINGS

- 33 -

< SETTINGS >

Notice:

If you change SSID/Password after WiFi Settings,

Password change

Format SD Card

Firmware Version

SSID change

- 34 -

It is required to redo the WiFi Settings, a tutorial window

will show up to guide the WiFi Settings.

< LIVE VIEW >
Front Cam Preview

Icons from left to right:

 Remained SD Card for Videos

 Power %

 Close the window and return to

main page

Preview

Icons from left to right:

* Snapshot

* Cam Switch

* Record start/stop

* SETTINGS

- 35 -

Enter F  R
Rear Cam Preview

- 36 -

< SETTINGS >

Resolution：1080P
UpsideDown：UpsideDown / Normal
Sound：With Sound / Without Sound
LoopVideo：1Min / 2Min / 3Min / 5Min

- 37 -

< MY MEDIA >

Display the recorded video file on SD card, you can choose the

desired video.

----------------------------------------- ---------------------------------------- --------------------------------------- ----------------------------------------- ------------

Display the snapshot of photo on SD card. You can choose desired

photo to show on Smartphone

Smart phone video

review

Smart phone photo

review

- 38 -

< Smart phone video review>

Video Review Tap to enter options

----------------------------------------- ---------------------------------------- --------------------------------------- ----------------------------------------- ------------

Browse & Playback Share

Notice：

Browse & Playback: Play videos with smart phone’s media player

Share: Share videos with smart phone’s APP.

- 39 -

< Smart phone photo review>

Photo Review Tap to enter options

----------------------------------------- ---------------------------------------- --------------------------------------- ----------------------------------------- ------------

Open & Playback Share

*Notice:

“Share” only supports APPs in smart phone.

- 40 -

< Video Review >

Video Review Tap to enter options

----------------------------------------- ---------------------------------------- --------------------------------------- ----------------------------------------- ------------

Open & Playback Save B62G video to smart phone

Notice：

Browse & Playback: Play videos with smart phone’s media player

- 41 -

DCIM：Recycle video file
LOCK：Non-loop video file
BACKUP：Backup File

- 42 -

< Moments >

Photo Review Tap to enter options

----------------------------------------- ---------------------------------------- --------------------------------------- ----------------------------------------- ------------

Browse & Playback Save B62G photo to smart phone

- 43 -

Trouble Shooting

Q1：Bike Cam could not boot up?

Ans.：
(1) Press Power key for 2 sec. then release. (If still could not boot
up, do the following)
(2) Use mobile power supply or DC power cable as power supply
for the Bike Cam, the system should boot up and charging at the
same time. Make sure the Charging LED is ON or the system is
turned ON. If not, do the following.
(3) Please contact your original dealer or our customer service
Dept.

Q2：Can this Bike Cam operate without external power source?

Ans.：
B62G is built-in with 1100mAh lithium battery. When it is fully
charged, it can continuous recording for about 1 hours. You can
use the APP to check the capacity of the battery.

Note: If you use the rear cam at the same time, the recording time

will be reduced to 1 hour.

Q3：When play the video files in PC, it will pause from time to
time?

Ans.：
(1) Make sure your SD card is Class 10 or above.
(2) Please make sure your computer meets the following
requirement: CPU 2.0GHz, Memory 1GB and above.
(3) Turn off all the resident programs.
(4) Copy the file to your computer first before playback.
(5) Use other video player program.

Q4：Recorded picture is fuzzy?

Ans.:
Please make sure there is not fingerprints or grease on B62G’s lens.

- 44 -

Q5：What is the maximum capacity/speed for the memory card
to be used with the B62G? How long can it records?

Ans :
B62G can support up to 32G for the memory card. Class10 level or
above type of SD card is recommended. 1 min recording is about
120MB of SD card. Front / rear cam recording for 1min. is about
240MB.

Memory Card Dual Cam Full HD (1080@30)

8GB about 30 min.

16GB about 60 min.

32GB about 120 min.

Q6：Memory card is damaged and cannot be recorded?

Ans.:
(1) Memory card is a consumer type product. It has a cyclic R/W life
mechanism. Too much read and write will make the memory card
reach its limit and result with various problems in R/W. So we
strongly recommend to format the memory card every 3 months.
(2) If after formatting, still could not recording normally, please
contact your SD card dealer or send it back for repair.
(3) Memory card of Class 10 level or above is recommended.

Q7: Phone / tablet cannot find the B62G, nor make connection?

Ans.:
(1) Please check to see if B62G’ WiFi is ON?
(2) Please check to see if Smart Phone’s WiFi is ON?
(3) Please make sure the B62G is selected in App’s WiFi devices
list.

- 45 -

(4) Restart the APP, and then connect again.
(5) If still failed to connect, please contact PX customer service
Dept.

Q8. : The recorded date/time is not correct?

Ans.:
Before us the B62G, connect to GoRiding APP once  System will
calibrate the system time to the local time.

Q9: Mobile supported system?

Ans.:
iOS: version 8.2 or above
Android: Version 4.0.3 or above.

Q10.: There is only one resolution for the photo mode?

Ans.:
This is because B62G use Snapshot for Photo mode, it supports only
1920x1080 resolution.

Q11 : When playback video files in Android system, the video
might distorted or flashback?

Ans.:
(1) Because the video file format is MOV(1080), some smart phone
does not support 1080@30 MOV playback.
(2) When this happened, please switch to 1080@30 resolution for
the recording.

Q12: PC system configuration for the video player program?

Ans.:
Windows XP/7/8/10

- 46 -

Specification

Main unit & Rear Cam

IC Chip (Front cam)AIT 8328P

(Reae cam)AIT 8437D
Dynamic Record
Resolution

Full HD 1080@30

Dynamic Record
Format

.Mov

Dynamic Video Ratio 16:9
Video Bit-Rate Average 20Mbps

Static Photo Format JPG，

(Front cam)FULL HD 1920x1080

(Rear cam)HD 1280x720
Static Photo Ratio 16:9
Image Sensor (Front cam)OV 4689

(Rear cam)AR0330
Optical Format (Front cam)1/3”

(Rear cam)1/3”
Pixel Size (Front cam)4.1M pixel

(Rear cam)3M pixel
Record Angle (Front cam)FOV(D) 122°

(Rear Cam)FOV(D) 178°
Lens Aperture (Front cam)F1.8

(Rear cam)F2.5
Power Supply 1. Built-in Lithium Battery

2. External DC 5V/1A power supply

* Frequency 60Hz

Lithium Battery Yes，1100mAh
Memory Card Support up to 32GB（MicroSD/SDHC）

USB type USB 2.0 High Speed
Six-axis Sensor Built-in GYRO-Sensor

- 47 -

Mic

Yes

Speaker

Yes

Wi-Fi Yes, 802.11 b/g/n
EIS Anti-shake Yes
Photo Shot Shot Shutter

APP Shutter
Cloud Share Yes, share via smartphone
WDR

Yes

Date/Time

Yes

Flip Yes, 180°

PS. APP Setup
Record Mode 1/2/3/5 minutes in length per record
I/O 1. Power in (micro USB)

2. EXTRA Option (micro USB)
 Rear Cam

Safety BSMI、NCC、CE

Water Proof Level IPX5
LED Indicator Power LED / Power LED

Charge LED / Alarm LED

WiFi LED
Language Traditional Chinese/English
Color Silver Grav
Size (Front cam)74mm * 45mm * 32mm

(Rear cam)43mm * 32mm * 45mm
Weight (Front cam)85g

(Rear cam)41g

Working Temp -20℃ ~ 55℃(Charging 45℃)

Storage Temp.
(For one year only)

-10℃ ~ 30℃ (RH 85%)

- 48 -

GPS

● Receiver type：GPS system

● Chip：U-blox 7020

● Frequency：L1 1575.42MHz

● Baud rate：9600bps

● Consumption：0.5W(max) (DC 5V 10mA)

● Waterproof：Ultrasonic pressing

● Interface：USB 2.0

● Operating temperature：-40 ~ 80℃℃

● Size：32 x 53 x 14 (mm) with cable 100mm (SR-SR)

● Weight：26 (g)

- 49 -

Series Difference

Model Series

Differences

Quick

Charge

WIFI GPS

Rear

Cam

Bike Mount

kit

Motorbike
Mount kit

FW

Version

B52Q

V V V

V V B52Q-V*.**

B52

V

V

B52-V*.**

B52X

V

V V B52-V*.**

B52G

V V

V V B52-V*.**

B52R

V

V V V B52-V*.**

B51

V B51-V*.**

B51X

V V B51-V*.**

B51G

V

V V B51-V*.**

B51R

V V V B51-V*.**

B62

V

V V V M62-V*.**

B62G

V V V V V M62-V*.**

B61

V V M61-V*.**

B61G

V

V V M61-V*.**

- 50 -

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

—

Reorient or relocate the receiving antenna.

—

Increase the separation between the equipment and receiver.

—

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

—

Consult the dealer or an experienced radio/TV technician for help

.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

- 51 -

Declaration of Compliance

Hereby we, Trans Electric Co., Ltd, declare that the radio

equipment type B52Q series is in compliance with Directive

2014/53/EU.

The full text of the EU declaration of conformity is available at

the following internet address: www.px.com.tw

Radio Frequency Power Claim

item Radio Frequency Output Power

WLAN 2.4GHz 802.11b 10dBm

2.4GHz 802.11g 10dBm

2.4GHz 802.11n HT20 10dBm