PVI Industries Durawatt CL User Manual
DURAWATT® CL
COMMERCIAL ELECTRIC WATER HEATER LIGHT DUTY
Hot Outlet 3/4"
(extends 1-1/2 inches
from top of tank)
Temperature and
Pressure Relief Valve
STANDARD EQUIPMENT and FEATURES
• Rotationally molded cement tank lining
• No anode rods required
• Non-ferrous tank fittings
• 150 psi design pressure, 300 psi test pressure
• Relief valve set for 210ºF and 150 psi
H
Upper Heating Element
and Hi-Limit Housing
(field installed)
• Dual copper-sheathed heating elements with
individual thermostats adjustable to 125ºF *
• Manual-reset high limit control set at 190ºF
Electrical
Connection
• 2" foam insulation
• Composite jacket
• Drain valve
• 5-year non-prorated tank warranty
Lower Heating
Element Housing
Model Number Storage
Capacity
W
KW
Cold Inlet 3/4"
and Drain
GPH Recovery
40º to 120ºF H Height W Width
Voltage Amps per kW
240, 1Ø 4.2
277, 1Ø 3.6
208, 3Ø 2.8
240, 3Ø 2.4
480, 3Ø 1.2
8 C 10-E 10 1.5 8 21 20 110
16 C 10-E 10 3 16 21 20 110
8 C 19-E 19 1.5 8 33 20 151
16 C 19-E 19 3 16 33 20 151
* C 30-E 30 see below see below 41 20 180
* C 40-E 40 see below see below 58 20 245
* C 41-E 40 see below see below 33 26 245
* C 50-E 50 see below see below 51 22 255
* C 51-E 50 see below see below 36 28 255
* C 60-E 60 see below see below 58 22 300
* C 65-E 65 see below see below 48 26 325
* C 70-E 70 see below see below 69 22 330
Shipping
Weight lbs.
*Available prefixes for 30 to 70 gallons models
Model Prefix kW Input Gph recovery Number of elements and operation
22 4.5 22 Non-simultaneous operation of two 4.5 kW elements
30 6 30 Non-simultaneous operation of two 6 kW elements
44 9 44 Independent operation of two 4.5 kW elements
60 12 60 Independent operation of two 6 kW elements
10 and 19 gallon heaters are not available in 3-phase.
PVI INDUSTRIES, LLC ▪ FORT WORTH, TEXAS ▪ (800) 784-8326
PV 6495 10/07
Loading...