PVI Industries 2000N400A-TPO, 250N400A-TPO, 1250N400A-TPO, 4000N400A-TPO, 3000N400A-TPO User Manual

TURBOPOWER® OIL  PACKAGED WATER HEATER

NICKELSHIELD

Model

Number

250 N 400A-TPO 250 200 199,000 29 4 17 1/3
500 N 400A-TPO 500 400 399,000 29 5 17 1/2

750 N 400A-TPO 750 600 600,000 32 6 17 1/2
1000 N 400A-TPO 1000 800 800,000 32 8 17 1/2
1250 N 400A-TPO 1250 1000 1,000,000 49 8 17 1/2
1500 N 400A-TPO 1500 1200 1,200,000 49 8 17 1/2
2000 N 400A-TPO 2000 1600 1,600,000 11.4 61 10 25 1-1/2
2500 N 400A-TPO 2500 2000 2,000,000 14.3 61 10 25 1-1/2
3000 N 400A-TPO 3000 2400 2,400,000 17.1 60 12 25 1-1/2
3500 N 400A-TPO 3500 2800 2,800,000 20.0 60 12 25 5
4000 N 400A-TPO 4000 3200 3,200,000 22.8 60 12 25 5

 Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.
 "J" dimension is for the burner housing only.
 4" x 42" Channel skids for inputs ≤ 1000 MBtu/h.

4" x 53" Channel skids for inputs > 1000 MBtu/h.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form PV 6004.

Recovery gph 

40°- 120°F 40°- 140°F A B J  HP

®

NICKEL-PLATED STORAGE TANK

TANK SERIES 400 GALLONS

Input
Btu/h

Gph

#2 Oil

1.4

2.8

4.3

5.7

7.2

8.6

Dimensions (inches)

K

39
39
39
39
39
39
39
39
50
50
50

Blower

Motor

Volt/Ph/

Amps

115/1∅/8
115/1∅/10
115/1∅/10
115/1∅/10
115/1∅/10
115/1∅/10
115/1∅/20
115/1∅/20
115/1∅/20
230/3∅/16
230/3∅/16

Shipping

Weight

lbs

1700
1720
1800
1840
2080
2090
2530
2550
2560
2590
2640

VENTING REQUIREMENTS

-.02" TO -.06" W.C. (NEGATIVE PRESSURE)

ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED

UPON THE VENT CONNECTION DIAMETER EXCLUSIVELY.

FOR PROPER SIZING, CONSULT VENTING SUPPLIER.

* REAR ACCESS MODULE

MODEL PREFIX M L STD or OPTIONAL

250-1500 23" 8" OPTIONAL

2000-2500 23" 18" STANDARD

3000-4000 30" 25" STANDARD

FORT WORTH, TEXAS 76111

PV 5420 04/05

[phone]

STANDARD ELECTRICAL REQUIREMENTS

CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS.
MOTOR VOLTAGE:
208V, 230V, AND 460V MOTORS ARE AVAILABLE BUT WILL
REQUIRE A SEPARATE 120V/2 amps CONTROL CIRCUIT OR AN
OPTIONAL CONTROL CIRCUIT TRANSFORMER.

PVI INDUSTRIES, LLC

 [phone]  www.pvi.com

PVI RESERVES THE RIGHT TO CHANGE THE DESIGN

AND SPECIFICATION WITHOUT NOTICE.

Product is patented in the U.S., Canada, and Mexico.