Push Video 1.3 MP series, D1 series Operation Manual
n701ez_702_702a_801ez_803ez_815ez_operation_V1.1
NETWORK CAMERA SERIES
OPERATION GUIDE
Please read instructions thoroughly before operation and retain it for future reference.
IMPORTANT SAFEGUARD
All lead-free products offered by the company comply with the requirements of the
European law on the Restriction of Hazardous Substances (RoHS) directive, which means
our manufacture processes and products are strictly “lead-free” and without the hazardous
substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product
must be collected separately at the product end-of-life. This applies to your product and
any peripherals marked with this symbol. Do not dispose of these products as unsorted
municipal waste. Contact your local dealer for procedures for recycling this equipment.
This apparatus is manufactured to comply with the radio interference requirements.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
All external cables connecting to this basic unit must be shielded.
For cables connecting to PCMCIA cards, see the option manual or installation instructions.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device mat not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna9s)
used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provided with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
DGT Warning Statement
Article 12 Without permission, any company, firm or user shall not alter the frequency, increase the power, or
change the characteristics and functions of the original design of the certified lower power frequency electric
machinery.
Article 14 The application of low power frequency electric machineries shall not affect the navigation safety
nor interfere a legal communication, if an interference is found, the service will be suspended until
improvement is made and the interference no longer exists.
Trademark Acknowledgements
iPad® & iPhone® are the registered trademarks of Apple Inc.
Android™ is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.
Microsoft®, Windows® & Internet Explorer® are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Disclaimer
We reserve the right to revise or remove any content in this manual at any time. We do not warrant or assume
any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The content of
this manual is subject to change without notice.
This product doesn’t have a standby / off mode.
MPEG4 Licensing
THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN
COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING
MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY
MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL
AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM.
GPL Licensing
This product contains codes which are developed by Third-Party-Companies and which
are subject to the GNU General Public License (“GPL”) or the GNU Lesser Public License
(“LGPL”).
The GPL Code used in this product is released without warranty and is subject to the
copyright of the corresponding author.
Further source codes which are subject to the GPL-licenses are available upon request.
We are pleased to provide our modifications to the Linux Kernel, as well as a few new
commands, and some tools to get you into the code. The codes are provided on the FTP
site, and please download them from the following site or you can refer to your distributor:
http://download.dvrtw.com.tw/GPL/IPCAM/F-Seriers/linux.tar.gz
TABLE OF CONTENTS
1. OVERVIEW......................................................................................................................................... 1
1.1 Product Features....................................................................................................................................... 1
1.2 Package Content....................................................................................................................................... 1
1.3 Hardware Overview................................................................................................................................... 1
1.4 Rear Panel ................................................................................................................................................ 2
1.5 External I/O Port........................................................................................................................................ 2
1.6 Status Indicator.......................................................................................................................................... 2
1.7 Insert a Micro SD Card (Selected Models Only) .......................................................................................3
2. CAMERA ACCESS WITH INTERNET EXPLORER............................................................................ 4
2.1 Camera Login............................................................................................................................................ 4
2.2 Control Panel Overview ............................................................................................................................ 5
2.3 Digital PTZ (DPTZ) Operations (Selected Models Only)........................................................................... 6
2.4 Event Record Search & Playback .............................................................................................................7
3. CAMERA CONFIGURATIONS............................................................................................................ 8
3.1 System configuration menu....................................................................................................................... 8
3.2 Network .....................................................................................................................................................9
3.2.1 Network ............................................................................................................................................................9
3.2.2 QoS ..................................................................................................................................................................9
3.2.3 Wireless..........................................................................................................................................................10
3.2.4 DDNS .............................................................................................................................................................10
3.2.5 SNTP..............................................................................................................................................................10
3.2.6 FTP.................................................................................................................................................................11
3.2.7 MAIL ............................................................................................................................................................... 11
3.2.8 Filter ...............................................................................................................................................................11
3.2.9 UPnP / Bonjour...............................................................................................................................................12
3.3 Camera ................................................................................................................................................... 13
3.3.1 Camera...........................................................................................................................................................13
3.3.2 Video ..............................................................................................................................................................13
3.3.3 Color...............................................................................................................................................................13
3.3.4 Audio ..............................................................................................................................................................14
3.3.5 LED ................................................................................................................................................................14
3.3.6 Advanced........................................................................................................................................................14
3.4 Record..................................................................................................................................................... 15
3.4.1 Record............................................................................................................................................................15
3.4.2 Record Timer..................................................................................................................................................15
3.5 Storage.................................................................................................................................................... 16
3.5.1 Memory ..........................................................................................................................................................16
3.6 Trigger..................................................................................................................................................... 16
3.6.1 Trigger ............................................................................................................................................................16
3.6.2 Push Video.....................................................................................................................................................18
3.7 General ................................................................................................................................................... 19
3.7.1 General...........................................................................................................................................................19
3.7.2 Time................................................................................................................................................................19
3.7.3 Server Log......................................................................................................................................................20
3.7.4 Online .............................................................................................................................................................20
3.7.5 Account...........................................................................................................................................................21
3.7.6 Google Maps..................................................................................................................................................22
3.7.7 Maintenance...................................................................................................................................................22
APPENDIX 1 PRODUCT SPECIFICATIONS........................................................................................ 24
APPENDIX 2 BIT RATE TABLE FOR REFERENCE ............................................................................ 26
APPENDIX 3 Q&A ................................................................................................................................ 29
APPENDIX 4 RECORDING TIME TABLE ............................................................................................ 30
APPENDIX 5 MICRO SD CARD COMPATIBLE LIST........................................................................... 31
1
1. OVERVIEW
1.1 Product Features
EaZy Networking to get your camera online in three steps with your iPhone / iPad / Android mobile devices
Push Video support to send an event notification to your iPhone / iPad / Android mobile devices immediately when an
alarm event occurs.
External alarm I/O device connection
Microphone built-in for audio recording
Remote Surveillance
-- Fully compatibility on iPhone & iPad, and Internet Explorer on Windows operating system
(Optional) 1.3 Megapixel with HDTV 720p quality, allowing users to notice minor details more easily
(Optional) Micro SD card support for video recording
(Optional) Network access via either a wireless IEEE 802.11 b/g/n connection or a wired Ethernet connection to provide
flexible installation options
(Optional) White LED built-in to illuminate the scene manually, scheduled by a timer, or triggered by a motion, an alarm, or an
audio event
1.2 Package Content
□ Network camera □ Camera Bracket
□ Quick Setup □ I/O Terminal block
□ RJ45 Network cable (Optional) □ Adapter (Optional)
□ CD Manual (Optional) □ Antenna (Optional)
1.3 Hardware Overview
Typ e 1
Typ e 2
2
1.4 Rear Panel
RJ45 Port: Connect your network cable.
Power: Connect the supplied regulated power supply.
Reset: With the power connected, press to reset all parameters, including the IP address to factory default
settings.
The camera will reboot after default reset. Please do not disconnect your camera during the reset
process.
External I/O Port A 4-pin I/O terminal is supplied with the camera for external alarm device connection. For details,
please refer to “1.5 External I/O Port” at page 2.
1.5 External I/O Port
This camera supports external I/O device connection, and a 4-pin I/O terminal is supplied with this camera for
easy connection.
Below shows which input on the I/O terminal you should use for wiring when you want to connect an external
device to this camera.
Alarm Out
GND
Alarm In
GND
DC 5V Relay DC 12V
Power Supply
Buzzer
COM
NC NO
Magnetic Contact
4-pin I/O Terminal Block Alarm Out Connection Example
1.6 Status Indicator
ICON
LAN connection status Internet connection status
System Status
During powering on Always on Always off
Blinking (on 250 ms, off 250 ms) Always off
Reset default
Blinking (on 250 ms, off 250 ms) Blinking (on 250 ms, off 250 ms)
Upgrade
Connection Status
LAN connected Always on --
Blinking (on 100 ms, off 500 ms) --
LAN disconnected
Internet connected -- Always on
Blinking (on 100 ms, off 500 ms)
Internet disconnected --
Micro SD Card Status
Micro SD card error
Keep current status for 20 sec Blinking for 3 sec Return to current status
Status during Network Setup
--
Blinking
(on 5 sec, off 0.5 sec, on 0.5 sec, off 0.5 sec, on 5 sec)
<EaZy Networking>
Failed to connect to
EagleEyes cloud server
--
--
Blinking
(on 5 sec, off 0.5 sec, on 0.5 sec, off 0.5 sec, on 5 sec)
<Other Methods>
Port forwarding required
--
* LED blinking frequency - LED on / LED off
3
1.7 Insert a Micro SD Card (Selected Models Only)
For local video recording, a micro SD card slot can be found on the side of the camera.
Note: Before inserting a micro SD card, make sure you’ve copied all important data saved in the card
(if any) to other storage media, or the data will be removed after inserting it to the camera.
Card slot on the left Card slot on the right
Check the indication above to ensure where your micro SD card is, and insert it to your camera.
Note: It’s recommended to insert or remove the micro SD card with power disconnected, or the
camera will reboot.
Note: For the compatible list of the micro SD card, please refer to “APPENDIX 5 MICRO SD CARD
COMPATIBLE LIST” at page 31.
4
2. CAMERA ACCESS WITH INTERNET EXPLORER
Note: If you’re using EaZy Networking to get your camera online, camera access with Internet Explorer
is currently not available, but will be ready soon. To access the camera, please use your mobile
device, such as iPhone, iPad or Android phone / tablet instead.
This network camera can be accessed via Microsoft Internet Explorer, and iPhone / iPad / Android mobile devices
with our self-developed program “EagleEyes” installed depending on different using situations.
Note: For details about accessing network cameras via iPhone / iPad / Android mobile devices, please
refer to http://www.eagleeyescctv.com.
Before using the camera, make sure you have configured the network settings, and the network connection is fine.
For network configurations, please refer to:
“Quick Setup” supplied with your camera if you’re using a router for Internet access, and you have a iPhone / iPad.
“Advanced Network Setup” downloadable from www.surveillance-download.com/user/ez.swf
if you’re not using a
router for Internet access.
2.1 Camera Login
Step1: Open your web browser, and key in http://ipaddress:portnum in the URL address box.
For example, for the IP address 60.121.46.236 and port No. 888, please key in ”http://60.121.46.236:888” into
the URL address box, and press “Enter”.
Step2: In the login page, key in the user name and password, and enter the security code from the image below if any.
Then, click “LOGIN”.
Step3: The wizard is then started.
‧ To skip the wizard and directly access the camera live view, click “Close”.
‧ To directly access the camera live view without starting the wizard for the login next time, check “Do not start wizard at login”.
Note: If you’re prompted to install “VLC player”, “Software” or “H264 Streaming Viewer”, please agree
to proceed the installation. Or, you might not be able to see the live view properly.
Step5: When the login is successful, the live view is shown.
5
2.2 Control Panel Overview
Note: The buttons available depend on the camera model you have, and the user level used to log in.
Function Icon User Level Description
Live
Supervisor / Power User
/ Normal User / Guest
Switch to the live view page.
DPTZ*
Supervisor / Power User
/ Normal User
Switch to the DPTZ configuration page.
For details, please refer to “2.3 Digital PTZ (DPTZ) Operations” at page 6.
Backup
Supervisor / Power User
Enter the event record list for video playback.
For details, please refer to “2.4 Event Record Search & Playback’ at page 6.
Config.
Supervisor
Switch to the system configuration page, and the functions available for
“Supervisor” and “Power User” are different.
For details, please refer to “3.1 System configuration menu” at page 8.
Select the image player from the drop-down list: Media Type --
Supervisor / Power User
/ Normal User / Guest
H.264 / MPEG-4 / Motion JPEG
QuickTime
QuickTime is Apple Inc.’s multimedia software. You need to have QuickTime
installed in your operating system before selecting “QuickTime”. When it is
selected, you will be promoted to enter the user name and password to access
the camera.
VLC
Quality --
Supervisor / Power User
/ Normal User
Click & drag the slider to select the video quality:
Basic / Normal / High / Best.
Select the image resolution from the drop list:
1.3MP Model D1 Model
SXGA (1280 x 1024) D1 (720 x 480)
HD720P (1280 x 720) CIF (352 x 240)
VGA (640 x 480)
QVGA (320 x 240)
Video Resolution --
Supervisor / Power User
/ Normal User
Live View Size:
Supervisor / Power User
/ Normal User
Normal Size*
The current live view size is the same as the selected resolution.
Fit to screen*
The selected resolution is resized to fit into the current live view size.
This icon doesn’t work when the selected resolution is VGA or QVGA.
Scale*
Click and hold the movable square on the left bottom corner of the live view
to move
This icon appears only when the selected resolution is larger than the current live
view size.
CIF Resize
The QVGA resolution is resized to fit into the current live view size.
This icon appears only when the selected resolution is QVGA (320 x 240) or CIF
(352 x 240).
6
Function Icon User Level Description
Snapshot
Supervisor / Power User
/ Normal User
Click to take a snapshot of the current view on a new window. Right click
on the picture and re-save it to the location you want.
Full Screen
Supervisor / Power User
/ Normal User
Click to display the image in full screen.
To exit the full screen mode, press “Esc” on your keyboard.
DPTZ*
Supervisor / Power User
/ Normal User
Click to enable digital PTZ functions.
Audio On / Off
/
Supervisor / Power User
/ Normal User
Click to switch the audio-in on / off.
Manual Alarm Out
Supervisor / Power User
/ Normal User
Click to force the connected alarm-out device to work. For example, when
your alarm device is a buzzer, click this button and your buzzer will start to
sound even if there’s no alarm event.
Microphone*
/
Supervisor Click to switch the audio-out on / off.
Record On / Off*
/
Supervisor / Power User
/ Normal User
Click to start / stop video recording.
A micro SD card must be inserted for this function to work properly.
LED Light*
--
Supervisor / Power User
/ Normal User
Click and drag the slider to adjust the brightness of the LED light.
When the brightness level is adjusted to 100%, the system will enable the
brightness of 100% for 3 minutes, reduce to 50% for 1 minute, and return to 100%
for 3 minutes, etc. This is to protect and extend the lifetime of the white LED.
* Selected Models Only
2.3 Digital PTZ (DPTZ) Operations (Selected Models Only)
This camera has PTZ capability, i.e. digital PTZ (hereafter called “DPTZ”), for wide area monitoring.
STEP1: Click “DPTZ” to show the DPTZ control panel.
STEP2: Select the functions when needed:
FUNCTION ICON DESCRIPTION
Resolution
--
Select the video resolution for the DPTZ function. Only “VGA” and “QVGA” are available.
Take snapshots
Click to take a snapshot of the current view on a new window. Right click on the picture and re-save it to the
location you want.
Audio On / Off /
Click to switch the audio-in on / off.
Alarm Out
Click to force the connected alarm-out device to work. For example, when your alarm device is a buzzer, click
this button and your buzzer will start to sound even if there’s no alarm event.
Microphone* /
Click to switch the audio-out on / off.
Available only when you’re a “Supervisor”.
* Selected Models Only
7
2.4 Event Record Search & Playback
This camera can only save up to three alarm recordings.
Note: To save more recorded data, it’s recommended to use this camera with the compatible NVR.
/
Previous / Next Hour
Click to jump to the next / previous time interval in an hour, for example, 11:00 ~ 12:00 or 14:00
~ 15:00, and start playing the earliest event video clip recorded during this whole hour.
Fast Forward Increase the speed for fast forward. Click to get 2X, 4X, 8X & 16X speed forward eventually.
Fast Rewind Increase the speed for fast rewind. Click to get 2X, 4X, 8X & 16X speed rewind eventually.
Play
Click to play the current video clip.
Pause
Click to pause the video playback.
Stop
Click to stop the video playback.
Step
In the pause mode, click to get one frame forward.
Audio Click to mute the playback if necessary, and click again to restore.
Download
Click to download the current video clip to the specified path in your PC.
The downloaded video can only be opened by our own video player. Please go to “General” → “Maintenance” to
download the video player, or get the player from the CD supplied with the sales package.
Loading...