PURO Sound Labs BT2200 Users manual

Congratulations on your purchase
of a Puro Sound Labs children’s
wireless headphones. Hearing
W ARRANT Y
Puro Sound Labs, LLC warrants the original owner of this product against
manufacturing and material defects under normal use for a period of one (1) year
from the date of retail purchase from Puro Sound Labs or a Puro Sound Labs
authorized reseller. The warranty does not cover damages resulting from misuse,
abuse, water damage, normal wear and tear, or modification.
®
QUICK START
GUIDE
B T 2200 S TUDIO GRADE
KIDS WIRELESS HEADPHONES
energy and, if not installed and used according to the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. This device may no
harmful interference and this device must accept any interference received,
including interference that may cause undesired operation.
If this equipment does cause harmful interference to radio or television reception,
which is found by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment or devices
Connect the equipment to an outlet other than the receiver’s
Consult a dealer or an experienced radio/TV technician for assistance
t cause
we’re dedicated to building
products that promote Healthy Ears
®
while delivering incredible sound
and value. Thank you for your
purchase. Please read the User
Manual to get the most out of your
new headphones.
M USI C US E
1. Choose media to playback and adjust the volume to your desired level.
2. Place the headphones on your (or your child’s head), the size can be adjusted
by pulling the “arms” down or pushing them back into the “headband”
3. The Bluetooth button can be used to pause and resume playback of music.
4. The Vol+ and Vol- buttons can be pressed or held to adjust volume to the
desired level.
P HON E US E
Initiate calls on your mobile handset. Music playback will be paused for the
duration of the call. A short press of the Bluetooth button
For incoming calls, a tone will sound on the Bluetooth headphones.
A short press of the Bluetooth button will answer the call.
will end the phone call.
For warranty claims, please visit http://purosound.com/support for instructions.
Puro Sound Labs, at its sole discretion will repair or replace the product, or ref
the original owner the purchase price.
und
R EGIS T R A TIO N
To receive the most up-to-date information about your product, please register at:
http://purosound.com/register
F C C S TAT E MENT
FCC ID:
2ADSG-BT2200
TThis product has been tested and complies with the specifications for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
Another three second press while the phone call is underway will return the call
to the headphones.
WIR ED U S E
Wired use may be necessary in the following circumstances:
The battery has been depleted.
No Bluetooth connection is available on the source device.
Use of wireless radios is restricted.
To use the wired connection, identify the limiter housing. It is a rubber molded
bump in the cable labeled “Puro Limite
must be plugged into the headphones for the limiter to function properly. The
other (long) end of the cable can then be connected to the source device.
When returning to wireless use, remove the 3.5mm cable.
r”. The limiter housing end of the cable
A one second press of the Bluetooth button will reject the call. Hold the
Bluetooth button until a tone is heard, then release.
A three second press of the Bluetooth button will transfer the call back
to the handset.
7
10
10
7
84
84
9
9
1
1
2
2
3
3
5
5
6
6
1. LED Indicator
1. LED Indicator
2. Bluetooth Button
2. Bluetooth Button
3. On/Off Switch
3. On/Off Switch
4. Vol+
4. Vol+
5. Vol-
5. Vol-
Do not use the headphones while operating a motor vehicle. (Our kids
headphones fit many adults.) Do not use the headphones any time it would be
dangerous to not be aware of noises around you.
If using while on an airplane, please follow the instructions of the crew for
permitted use of a Bluetooth product.
Do not use or store the headphones in a wet environment. If the headphones are
submerged or become wet, do not use.
6. 3.5mm Jack
6. 3.5mm Jack
7. Headband
7. Headband
8. Ear Cushion
8. Ear Cushion
9. Earcup
9. Earcup
10. USB Charging Port
10. USB Charging Port
P A C K A G E C ONT ENT S
Headphones
USB charging cable
USB AC adapter
3.5mm cable
Travel pouch
User manual (this manual)
Q UICK S T A R T ( P AIR ING )
1. Charge the headphones until the blue light remains on (indicating full charge).
1. Charge the headphones until the blue light remains on (indicating full charge).
This is accomplished by plugging the headphones into the charging cable, the
This is accomplished by plugging the headphones into the charging cable, the
charging cable into the USB wall charger and connecting the USB wall charger
charging cable into the USB wall charger and connecting the USB wall charger
to an AC outlet. (Charging may take up to 3 hours.)
to an AC outlet. (Charging may take up to 3 hours.)
RED LED = Charging / BLUE LED = Fully Charged
RED LED = Charging / BLUE LED = Fully Charged
2. Turn the headphones on (by moving the slider to the ‘on’ position) to
2. Turn the headphones on (by moving the slider to the ‘on’ position) to
automatically enter “discoverable” mode. For the first paring, the headphones
automatically enter “discoverable” mode. For the first paring, the headphones
LED will fast flash BLUE indicating that it is ready to pair. For subsequent
LED will fast flash BLUE indicating that it is ready to pair. For subsequent
product pairing, the Bluetooth button will need to be held for 3 seconds to
product pairing, the Bluetooth button will need to be held for 3 seconds to
enter “discoverable” mode.
enter “discoverable” mode.
3. Bring the source device within 1 meter of the headphones. Follow the source
3. Bring the source device within 1 meter of the headphones. Follow the source
device instructions to look for discoverable devices. Select “PURO BT2200”
device instructions to look for discoverable devices. Select “PURO BT2200”
from the list. You will hear a long high-tone beep when pairing is complete and
from the list. You will hear a long high-tone beep when pairing is complete and
the LED will change from a fast flashing blue to a slow flash blue. The
the LED will change from a fast flashing blue to a slow flash blue. The
headphones are ready for music or phone use.
headphones are ready for music or phone use.
BLUE Fast LED Flash = in Pairing Mode / BLUE Slow LED Flash = Paired
BLUE Fast LED Flash = in Pairing Mode / BLUE Slow LED Flash = Paired
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
S AFETY INFORM A TIO N
Warning! Continued exposure to loud noise (more than 85 decibels) (85 dBA) may
cause gradual but permanent damage to hearing.
Always turn the level of your Puro product down to a low level before placing the
headphones on your (or your child’s) head. Gradually turn up the volume until you
achieve a comfortable level. Never listen at high volumes for long periods. Always
verify maximum achievable volume levels before the headphones are given to a
child for use.
The Puro BT2200 model features a volume governor that limits output for hearing
safety. The rating uses an A-weighted scale with several genre of popular music to
achieve a max of approximately 85 dBA. The levels have been tested on popular
portable iOS and Android phones and tablets while streaming via the wireless
Bluetooth connection. Further, the in-line cable allowing use when the battery is
depleted has been designed to limit to the same approximately 85 dBA value on most
portable iOS and Android phones and tablets. When using the wired connection, a
home stereo or other high-powered source may exceed 85 dB. Because we cannot
test every device in the market, please verify that the maximum level that can be
achieved with your source device is within the “comfortable” guideline.
Do not use the headphones with products that can achieve levels above the
“comfortable” guideline.
All product and product specifications are subject to change without notice
to improve reliability, function, design or otherwise.
purosound.com
Loading...