Purmo RAMO PLINTH, Ramo plinth D Datasheet
WWW.PURMO.COM
Ramo plinth
Ramo plinth D
In response to the growing demand for even lower radiators
Purmo has now also developed the plinth radiator Ramo at
a height of 200 mm.
All plinth models are equipped with a beautifully nished
top grid, elegant side covers and an integrated valve body.
The supply tube for the hot water is concealed behind the
front panel.
• The plinth radiators are manufactured from cold
rolled, top quality sheet steel 1,25 mm thick according to
EN 10130. Construction: EN 442-1.
• The Ramo plinth radiator is available in the following 2
variations:
- with at front panel: single-sided (Ramo type)
- with at front panel: double-sided (Ramo D type)
All models are available in types 22, 33 and 44.
• All Ramo plinth radiators have a 33 mm vertical proling.
• Test pressure: 13 bar.
• Working pressure: 10 bar.
• Operating temperature: max 120°C.
• Accessories supplied and included in the price: 1 valve
body, 3 blind stops, 1 airvent and 1 plastic cap.
• There are no welded-on hanging brackets on the back of
the radiator.
• For all types wall brackets are available (2, 3 or 4 brackets
depending on the length of the radiator).
• Standing brackets are also available. Standing brackets
are built-in or on the surface of the oor mounted.
• Note: both the wall and standing brackets have to be
ordered separately.
• Connections: 6 connections of which 4 x G ½” on the side
and 2 x G ½” at the bottom – 50 mm.
• Colours: standard colour is RAL 9016. Other RAL-colours
and metallic colours are available.
Heat outputs
Heat outputs are measured according to standard EN 442,
with a water temperature of 75/65°C and room temperature of 20°C.
Coating process
The radiators are coated in a modern facility, specially
designed to protect the environment.
Pre-treatment
The pre-treatment consists of degreasing the radiators
(removal of grease and oil) and phosphating. In combination with the base coat, the phosphate layer provides
excellent rust protection. After pre-treatment, the radiators
are rinsed in deionised water.
Coating
This procedure consists of 2 phases. First and foremost the
radiators are coated cataphoretically with a corrosion
resistant base layer via submersion in a KTL-bath.
The radiators are then baked in a hot air oven at +/- 175°C.
Finally the powdered epoxy-polyester layer is applied, this one
is resistant to shocks, normal humidity and the majority of
acids, in accordance with standards DIN 55900 and EN 442.
Packaging
The radiators are protected on 2 sides by cardboard, including
corner protectors. The whole is packed in shrink-wrapping.
Guarantee
Purmo gives a 10 year quality guarantee on the entire
range of radiators and underoor heating!
Ramo plinth
Ramo plinth D
07/2009
weight : kg/m
hoogte Ramo Ramo D
type 22 15,50 17,60
type 33 22,20 24,30
type 44 28,80 30,90
volume : l/m
hoogte Ramo Ramo D
type 22 2,50 2,50
type 33 3,80 3,80
type 44 5,00 5,00
front view wall brackets and standing brackets
wall brackets
type 22
type 44
building on building in
standing brackets
200
50 30
50 30
type 33
type 22 type 33 type 44
wall foot wall foot wall foot
Ramo x x x x x x
Ramo D x x x
W/m & value n Ramo Ramo D
type 22 33 44 22 33 44
W/m - 75/65/20°C
778 1098 1381 747 1074 1341
W/m - 90/70/20°C
987 1402 1771 955 1370 1717
n-waarde 1,3030 1,3396 1,3644 1,3483 1,3361 1,3565
type 22 type 33
type 44
Ramo
Ramo D
D = double-sided front panel
104 mm type 22
154 mm type 33
204 mm type 44
106 mm type 22
156 mm type 33
206 mm type 44
Because the connection
valve is eccentric in the
radiator for type 33, the
measure b is 126 mm in
case of left connection.
type 22, 33, 44
100-120
a : 129 mm
b : 76 mm
c : 25 mm
type 22
a
b
c
100-120
a : 179 mm
b : 76 mm
c : 25 mm
type 33
a
b
c
100-120
a : 229 mm
b : 126 mm
c : 25 mm
type 44
a
b
c
100-120
Usage wall or standing brackets: < 1600 mm : 2 pieces
1600 - 2400 mm : 3 pieces
> 2400 mm : 4 pieces
Note:
both the wall and standing brackets
have to be ordered separately.
Rettig Park - Drum Lane, Birtley, County Durham, DH2 1AB
Tel 0845 070 1090 - Fax 0845 070 1080 - uk@purmo.co.uk
Loading...