PurePro PJ-703 PERFECT WATER SERIES User Manual
P
R
O
P
URE
DRINKING WATE R SYSTEM
19
PURE-PRO PERFECT WATER SERIES
P
R
O
P
URE
DRINKING WATER SYSTEM
Type of product
Date of purchase
Name Tel
Address
Memo
PJ-703
PJ-703
PERFECT WATER SERIES
USER'S MANUAL
Thank you very much for selecting Pure-Pro Water Corp.
In order to bring the best use of your system, please read the user's manual
carefully before installation and follow the regulations.
01 About perfect water
03 Why perfect water is popular
04 Components
05 Cartridge filters
07 Preparation
08 Panel operations and functions
10 Tubing connection diagram
11 Installation diagram
13 Change filters
16 Change membrane
17 Trouble shooting guide
18 FAQ
19 Memo
01
PURE-PRO PERFECT WATER SERIES
18
PURE-PRO PERFECT WATER SERIES
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
About Perfect Water
¨Features
Four levels of alkaline water.
Two levels of acid water, including super-oxide.
Filter water (non-ionized) - by Reverse Osmosis Water System
Stainless steel output spout
Built-in auto-flushing electrode.
Unique post-operation automatic and silent cleansing for extended lifespan
Voice confirmation every time you select a different pH level
Filter change required indicator
Easy 1-minute change filter compartment
Optional ability to connect direct to plumbing and operate under mains pressure
3.2 Gallons NSF Standards Water Storage Tank.
FDA Approved Polypropylene Made Flat Cap Housing.
Automatic Shut-off Valve, Mini Flow Restrictor, Stainless Steel Check Valve.
Special & Beautiful Water Ionizer faucet
Feed water connector, drain saddle valve.
Four Color Coded 1/4 inch Tubing for System Connection
Completely Assembled
100% Factory Tested and Sterilized Ready for Installation.
Installation Instruction.
¨PurePro Perfect Water Series ( RO + Water Ionizer )
More and more people understand that the "perfect water" system would combine
the purity of Reverse Osmosis (R/O) and the tremendous benefits provided by
alkaline, ionized water. Historically this has not been easily achieved for a variety
of reasons. Our water technology experts at PurePro have solved the problem of
combining these two phenomenal yet very different water technologies. Now you
can have perfectly clean AND perfectly healthy water by installing RO system with
water ionizer!
Model: ERS-105-NF
Membrane: 100 GPD / 378 LPD Nanofiltration membrane
Operation pressure: 50 - 100 PSI
Dimensions: (cm) 29 (L) x 21 (W) x 42.5 (H) - System
(cm) 28 (L) x 28 (W) x 35 (H)- Tank
Weight: 8 kg - system
4 kg - tank
¨Specifications: (Reverse Osmosis)
FAQ
Q: What is the guarantee on the PurePro system ?
The PurePro system (excluding filters) is guaranteed for 1 year for material and
workmanship. All defective parts will be replaced free within the first year under
natural breakdown. The membrane has one year pro-rated guarantee.
Q: What factors affect the quantity and the quality of the water production?
There are four major variables to consider:
1.Pressure-The greater the water pressure, the better water quantity and
quality it produced. Water pressure of 60 PSI is ideal.
00
2.Temperature-76 F is the ideal water temperature for R.O. 40 F water will
0
cause the production of R.O. water to fall to half of that at 76F. The maximum
0
water temperature recommended is 85 F.
3.Total Dissolved Solids (TDS)-The higher the amount of dissolved
contaminants in the water, the lower the quantity of water produced. A high
level of TOTAL DISSOLVED SOLIDS can be overcome with additional water
pressure.
4.Membrane-Different membranes have different characteristics. Some
produce more water than others; some have better contaminant rejection
capabilities; some have greater resistance to chemical abrasion for longer life.
PurePro system includes NF33-1812-100 The Thin Film Composite (TFC)
membranes combine the best of these characteristics and are considered the
finest membrane in the world.
Q: What is the maintenance schedule for the PurePro system ?
The three pre-filter cartridges should be changed every 6 months. The 5 micron
sediment cartridge filter is the first one; the second is a carbon cartridge filter,
and the third one is a 1 micron sediment filters. (some systems comes with the
Extruded carbon filter.) Failure to change the cartridge every 6 months may
cause chlorine to destroy the membrane.
Q: What does the PurePro series drinking water taste like?
The taste of the PurePro water depends on the amount of contaminants in the
tap water originally. If 95% of dissolved minerals and chemicals are removed,
the R.O. water may taste like distilled water (no minerals), bottled water (low
mineral), or natural spring water (moderate mineral content).
17 02
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
¨Specifications: (Water Ionizer)
About Perfect Water
PURE-PRO PERFECT WATER SERIES
PURE-PRO PERFECT WATER SERIES
Processing rate of water 2./minute:
2
[In-water pressure is 0.1Mpa(about 1kgf/cm )]
Water exit volume 3L/minue:
2
[In-water pressure is 0.2Mpa(about 2kgf/cm )](estimate)
Electrolysis capacity level: Alkaline 3 level; Acidic 1 level
Possible continuous electrolysis duration:
(Level 1~2) about 1 hours (Level 3) about 30
Plate cleaning automatically performs every time being used.
When intensive cleaning is required after a period of time,
Intense cleaning indicator is on.
Automatic back cleaning when tap water is closed after
processing.
0
40 C
Power supply
AC: 220V/50HZ(customized product)110V/60HZ
100-200W
Nanometer titanium alloys electrolysis trough
Power consumption
Electrolysis material
In-water pressure
2
1 ~ 6.5kg/cm
Electrolysis technique
Continuous electrolysis technique (water volume and
temperature gauge built-in)
Machine protection
installation
Fuse 10Aand electrical board: 2A electrical power
overheating protection installed, transformer
temperature protection installed.
Electrolysis
Main machine
dimension
Height 330mm x Width 250mm x Depth 155mm
Machine weight
About 5.5kg
Purifier
Total water flowing volume: about 12000L
Purifying capacity: take away salty particle residue
Remove foul and bad odor
Max.wate temperature
for continuous usage
Power cable length
About 9 feet
Model
JA-703
+800MV ~ -700MV
ORP level
Phenomenon Reason for problems and handling guideline
Power background
light mot on displays
nothing
Ensure power cord is connected to an electrical outlet
Back light is mot on
and nothing get
displayed when
generating
1.Water pressure too low, the machine does not work
correctly, operator installs additional water pump.
2.Check for correct installation of filter cartridge. The
machine does not work when filter cartridge is misplaced.
Unfold the bent part of the water supply hose.
Ionized water or pure
water come out dirtily
1.Maybe it is time to replace filter cartridge? (Filter cartridge
can be bought in distribution agencies)
2.Is the tap only half on? Please let more water flow out from
the tap.
3.Is water supply line frozen? Defrost the water supply line
before using. Is the indicator light for cleaning required on?
Please perform cleaning.
Electrolyzed a lkal ine
water appears to have
white colored stain
Alkaline ionized water is usually white color after being
generated. This is due to the air bubbles formed as a result
of reaction with electrolysis. It will turn into transparent in a
short while and is perfectly safe for drinking.
1.The white floating object is a crystal formation(the solid
form of calcium) which reaction of Calcium ion and Carbon
Dioxide in the air generates. It is perfectly safe for drinking.
2.The thin layer that can be seen is the solid form of Calcium.
Please use vinegar to clean it.
Container for storing
alkaline water shows
white floating object
or develops thin layer
on its inner wall
Not using the ionizer
for long period of time
Alkaline water flowing
out from alkaline
faucet becomes slower
and slower
Maybe gradual formation of Calcium crystal in hose blocks
the water outlet, which makes the water flow-out become
slower and slower. Please consult with a professional to
clean inner hose or purchase special filter cleanser for the
ionizer from our company.
Please ensure the power cord is unplugged. Remove water
separator and filter device from the purifier.
Trouble Shooting Guide
Loading...