P
R
O
P
URE
DRINKING WATE R SYSTEM
REVERSE OSMOSIS SYSTEM
19
PURE-PRO REVERSE OSMOSIS SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
Thank you very much for selecting Pure-Pro Water Corp.
In order to bring the best use of your system, please read
the user's manual carefully before installation and follow
the regulations.
Type of product
Date of purchase
Name Tel
Address
Memo
USER'S MANUAL
HRO-500
HRO-500 High Capacity Reverse Osmosis System
HRO-500
01 Introduction of HRO-500
02 What is Reverse Osmosis
03 Components& Selections
04 Cartridge filters
05 The parts of HRO-500
06 Tubing connection diagram
07 Installation diagram
12 Change filters
13 Change RO membrane
14 Operation regulations
16 FAQ
18 Maintenance checking list
19 Memo
¨HRO-500 High Capacity RO System
A high capacity, low cost system. Perfect for offices or small factory. Designed for
commercial and residential application. It is suitable for manufacturing,
restaurants, food processing industries, shopping centers, schools and hotels.
Provides high quality drinking water with capacity up to 1.3 liters per minutes.
Can be installed under or next to kitchen sink. Designed for the direct flow, No
tank required, provides maximum output, while taking up minimum space.
System is equipped with High Flow Booster Pump for increased water production
capacity.
01
PURE-PRO REVERSE OSMOSIS SYSTEM
18
PURE-PRO REVERSE OSMOSIS SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
Maintenance checking list
Production: 500 GPD / 1890 LPD
Operation Pressure : 10 - 80 psi
Available in : 110 volt, 220volt, 240volt. ( 50 / 60 Hz)
Weight (System) : 20 kg
Dimensions: 38.0 (L) x 25.5 (W) x 46.0 (H) cm
Date
Filters
1st stage 2nd stage 3rd stage
4th stage
6th stage
Other items
5th stage
~
¨Specifications
¨Features
200 gallons per day membrane
High flow booster pump
Direct flow for 1.3 liters per minutes
FDA approved polypropylene made flat cap housings
Comes with attractive designer faucet
Build in electrical shut off valve to prevent any damage of the membrane
All hardware included
Completely assembled, 100% factory tested and sterilized ready for
installation
x 3
Introduction of HRO-500
HRO-500 High Capacity Reverse Osmosis System HRO-500 High Capacity Reverse Osmosis System
17
PURE-PRO REVERSE OSMOSIS SYSTEM
02
PURE-PRO REVERSE OSMOSIS SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
Maintenance checking list
Date
Filters
1st stage 2nd stage 3rd stage
4th stage
7th stage
Other items
6th stage
~
Reverse osmosis was originally designed to make sea water drinkable for the
navy. It is ideal for anyone on a low sodium diet. An R.O. membrane has a pore
size much smaller than bacteria virus, or the cryptosporidium parasite. When
functioning properly it will remove all microorganisms from tap water and produce
sterile water. Reverse osmosis is the reversal of the natural flow of osmosis. In a
water purification system, the goal is not to dilute the salt solution, but to
separate the pure water from the salt and other contaminants. When the natural
osmotic flow is reversed, water from the salt solution is forced to pass through the
membrane in the opposite direction by application of pressure-thus the term
REVERSE OSMOSIS. Through this process, we are able to produce pure water
by screening out the salts and other contaminants.
What is reverse osmosis
Reverse Osmosis
Pressure
Membrane
Water flow
HRO-500 High Capacity Reverse Osmosis System HRO-500 High Capacity Reverse Osmosis System
03
PURE-PRO REVERSE OSMOSIS SYSTEM
16
PURE-PRO REVERSE OSMOSIS SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
Components & Selections
FAQ
3/8 deliver-valve
Faucet
Housing wrench
half-circle
Feed water connector
Tubing
RO membrane x 3
¨Components
¨Selections
6/8 hot &cold water
deliver-valve
standing faucet
bracket
3/8 extended RO
tubing white
Infra-red cartridge filter
T.D.S
UVC-LIGHTING
ULTRAVIOLET WATER STERILIZER
Mineral cartridge filter
UV water sterilizer
TDS meter
Infra-Red
Mineral
Q: What is the guarantee on the PurePro system ?
The PurePro system (excluding filters) is guaranteed for 1 year for material and
workmanship. All defective parts will be replaced free within the first year under
natural breakdown. The membrane has one year pro-rated guarantee.
Q: What factors affect the quantity and the quality of the water production?
There are four major variables to consider:
1.Pressure-The greater the water pressure, the better water quantity and
quality it produced. Water pressure of 60 PSI is ideal.
00
2.Temperature-76 F is the ideal water temperature for R.O. 40 F water will
0
cause the production of R.O. water to fall to half of that at 76F. The maximum
0
water temperature recommended is 85 F.
3.Total Dissolved Solids (TDS)-The higher the amount of dissolved
contaminants in the water, the lower the quantity of water produced. A high
level of TOTAL DISSOLVED SOLIDS can be overcome with additional water
pressure.
4.Membrane-Different membranes have different characteristics. Some
produce more water than others; some have better contaminant rejection
capabilities; some have greater resistance to chemical abrasion for longer life.
PurePro system includes TW30-1812-200 The Thin Film Composite (TFC)
membranes combine the best of these characteristics and are considered the
finest membrane in the world.
Q:
Q: What does the PurePro series drinking water taste like?
The taste of the PurePro water depends on the amount of contaminants in the
tap water originally. If 95% of dissolved minerals and chemicals are removed,
the R.O. water may taste like distilled water (no minerals), bottled water (low
mineral), or natural spring water (moderate mineral content).
My RO system is not making any water. What should I do?
1.Make sure you plug in electricity.
2.Check the water supply. Make sure it's on.
3.Check if pumps work well.
If none of above occur, please contact a technician at the nearest shop for
assistance.
HRO-500 High Capacity Reverse Osmosis System HRO-500 High Capacity Reverse Osmosis System
15
PURE-PRO REVERSE OSMOSIS SYSTEM
04
PURE-PRO REVERSE OSMOSIS SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
Operation regulation
3 Months
1 Year
1 Year
Stage 1
Stage3
Stage 2
Stage 4~6
200GPD TFC
membrane 2 pcs
Stage 7
Post
Carbon Filters
Cartridge Filters
Filter Description
3 Months
3 Months
This 5micron sediment filter is made of 100%
pure polypropylene fibers. High capacity filter
removes dusts, particles and rusts.
This block carbon filter is composed of highperformance carbon that removes free chlorine,
odor, organic contaminants, pesticides and
chemicals that contributed to taste and odor.
NSF approved. This post carbon filter is designed
to improve taste. It removes any residual
impurities and odors from the tank and provides a
finer conditioning of pure water.
Block Carbon Filter
Service Life
Cartridge Filters
5 micron
Sediment Filter
Granular Activated
Carbon Filter
200 Gallon Per Day Membranes are now
available in residential sizes. Designed to
perform in operating conditions similar to most
standard under-the-counter home RO units, the
TW30-1812-200 forms a tight fit in most standard
residential housings.
A.With everything connected, turn on the water check for leaks.
B.Within a few minutes (up to 15) the water will start to run from the
faucet slowly.
C.Let the water run for at least 30 minutes. This flushes the carbon
filters on first time use.
D.Close the sink top faucet. The system is now ready for use.
E.Change filters regularly every 6 to 12 months and have the
membrane checked annually.
Caution
0
1.Do not use hot water (over 45 C)!
2.Do not freeze the machine!
3.Switch off electricity and water source if away for more than 5 days,
and drain out pure water.
This granular activated carbon filter is composed
of high-performance activated carbon that
remove free chlorine, odor, organic contaminants,
pesticides and chemicals that contributed to taste
and odor.
HRO-500 High Capacity Reverse Osmosis System HRO-500 High Capacity Reverse Osmosis System
05
PURE-PRO REVERSE OSMOSIS SYSTEM
14
PURE-PRO REVERSE OSMOSIS SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
3rd stage filter housing
Operation regulation
4 For the first time operation when
changing the filters, water should
run for at least 20 minutes before
drinking it.
1 Plug in electricity.
1st stage filter housing
2nd stage filter housing
RO membrane housing
Post carbon filter
Input water
To the faucet
RO system main
housing bracket
2 Turn on water source.
To RO system
RO membrane housing
The parts of HRO-500
Transformer
Booster pump
Electronic solenoid valve
3 Pumps start to function.
Booster
pump
Flow restrictor
To the faucet
To drain out tube
HRO-500 High Capacity Reverse Osmosis System HRO-500 High Capacity Reverse Osmosis System
High pressure protector
To RO system
06
PURE-PRO REVERSE OSMOSIS SYSTEM
13
PURE-PRO REVERSE OSMOSIS SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
2
1
3
P
R
O
E
N
G
W
A
T
E
R
S
Y
S
TE
M
Jaco nuts
Change membrane
3 Loose the Jaco fitting anti-clockwise.
4 Open the RO membrane housing
anti-clockwise.
5 Take out the old RO membrane with
a handy tool.
6 Insert a new RO membrane.
1 Unplug electricity.
Faucet
Input water
Drain out
Tubing connection diagram
1
2
3
In
Drain out
To faucet
2 Turn off water source.
HRO-500 High Capacity Reverse Osmosis System HRO-500 High Capacity Reverse Osmosis System
1.Loosen the fitting nuts and the cap from the RO membrane housing as shown in
the picture. Unpack the RO membrane and insert to its housing (rubber gasket
towards to the open end). When completed, tighten up the cap with the RO
membrane housing and the jaco fittings.
2.Turn off the water supply. Loosen the stainless steel pipe connector.
PR
O
E
N
G
W
A
T
E
R
S
YS
T
E
M
3.Get feed water connector and connect it to the stainless steel pipe as in the
picture 2.
Jaco nuts
Cold
Installation diagram
PURE-PRO REVERSE OSMOSIS SYSTEM
07
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
3 Unplug electricity.
4 Open the housings clockwise.
7 After changing filters, let water run
for about 15 minutes to clear the
filters.
Change filters
1 Have a half-circle
housing wrench
ready.
12
PURE-PRO REVERSE OSMOSIS SYSTEM
To RO system
2 Turn off water source.
Be sure tighten with
O-ring to prevent
from leaking.
5 Insert new filter.
To faucet
6 Loose the fitting nuts at point 1,2.
Take out the jaco fittings, and seal
it up with the Teflon tape again.
Replace the new pre-filters.
1
2
HRO-500 High Capacity Reverse Osmosis System HRO-500 High Capacity Reverse Osmosis System
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
PURE-PRO REVERSE OSMOSIS SYSTEM
11 08
PURE-PRO REVERSE OSMOSIS SYSTEM
4.Get deliver valve and seal it with Teflon tape for 14 circles. Then connector it
with the feed water connector.
5.Get tubing white, connect it with deliver valve and the inlet water supply (as
point 1 on page 06)
Installation diagram
9.Take tubing white. Wear the concave type screw on tubing white and insert the
tubing shroud as shown in the picture. Connect the tubing top with the faucet
end. Then connect the tubing end to the last stage filter (as point 3 on page 06)
10.Make sure that you complete No. 1 to No. 9. If so, switch on water supply and
plug in electricity.
PS. Do not use drink water from the first made water in the tank.
Installation diagram
HRO-500 High Capacity Reverse Osmosis System HRO-500 High Capacity Reverse Osmosis System
P
R
O
P
URE
DRINKING WATER SYSTEM
P
R
O
P
URE
DRINKING WATER SYSTEM
PURE-PRO REVERSE OSMOSIS SYSTEM
09 10
PURE-PRO REVERSE OSMOSIS SYSTEM
6.Take tubing white again, connect it with the drain out (as point 2 on page 06)
7.Use an electric drill and drill an approximately 1 cm hole through the
kitchenware table.
Installation diagram
8.Take out the faucet and its components. Install the faucet and the rubber gasket
to the kitchenware table. Install the rest of component as shown in the picture.
Installation diagram
Faucet
Kitchenware table
Twisted plastic locker
Rubber gasket
Flat metal piece
Screw locker
PS. To suit your kitchenware table, you can choose to have twisted plastic locker
or screw locker to be installed for your faucet.
HRO-500 High Capacity Reverse Osmosis System HRO-500 High Capacity Reverse Osmosis System
Loading...