Pure Power Tools PUREANGGRINDER18 Original Instructions Manual
18V Li-Ion
Angle Grinder
(PUREANGGRINDER18V)
Original
Instructions
Read instructions before operating this tool.
WARNING!
The angle g rin der i s to be u sed for grinding only.
Under no circumstances must a cu tting disc be tted to this machin e.
2
PURE 18V Angle Grinder
TABLE OF CONTENTS
EC - Declaration of Conformity
Important Information
12 Month Limited Warranty
General Safety Rules
Additional Specic Safety Rules
Labels and Symbols
Angle Grinder Overview
Specication
Operating Instructions
Maintenance
Environmental Protection
EC - DECLARATION OF CONFORMITY
We, the importer
Evolution Power Tools Ltd.
Venture One
Longacre Close
Shefeld
S20 3FR
Declare that the product
Part numbers: PUREANGGRINDER18
Evolution: Pure Battery Angle Grinder
Complies with the essential requirements
of the following European Directives:
2006/42/EC – Machine Directive
2006/95/EC – Low Voltage Directive
2004/108/EC – EMC Directive
2002/95/EC – Restriction of the use of
Certain Hazardous Substances in Electrical
and Electric Equipment
Standards and Technical specications
referred to:-
EN 5 5014 -1/ A1:2 00 9
EN 55014 -2/A2:2008
EN 6 074 5-1/ A11:2 010
EN 60745-2-3:2011
All documentation is held on le at
the above address and is available,
on request for review.
Authorized Signatory
Date: 2 0/11/11
Name: Mr Matthew J Gavins
Position: Managing Director
02
03
03
03
05
07
07
08
08
10
10
3
IMPORTANT
Please read these operating and safety
instructions carefully and completely.
For your own safety, before using this
equipment check that the voltage is correct
and that all handles and parts are rmly
secured. If you are uncertain about any
aspect of using this equipment, please
contact our Technical Helpline.
UK 0870 609 2297
PURE 115 mm 18V Angle Grinder
Congratulations on your purchase of an
Evolution Power Tools Pure 18V Angle
Grinder. Please complete your product
registration online to validate your machine’s
warranty period and ensure prompt service if
needed. We sincerely thank you for selecting
a product from Evolution Power Tools.
12 MONTH LIMITED WARRANTY.
Evolution power tools reserves the right
to make improvements and modications
to design without prior notice.
Evolution Power Tools will, within twelve (12)
months from the original date of purchase,
repair or replace any goods found to be
defective in materials or workmanship.
This warranty is void if the tool being
returned has been used beyond the
recommendations in the
Instruction Manual or if the machine has been
damaged by accident, neglect, or improper
service. This warranty does not apply to
machines and / or components which have
been altered, changed, or modied in any way,
or subjected to use beyond recommended
capacities and specications. Electrical
components are subject to respective
manufacturers’ warranties. All goods returned
defective shall be returned prepaid freight to
Evolution Power Tools. Evolution Power Tools
reserves the right to optionally repair or replace
it with the same or equivalent item. There is
no warranty – written or verbal – for Grinding
Discs. In no event shall Evolution Power Tools
be liable for loss or damage resulting directly
or indirectly from the use of our merchandise or
from any other cause. Evolution Power Tools
is not liable for any costs incurred on such
goods or consequential damages. No ofcer,
employee or agent of Evolution Power Tools
is authorized to make oral representations of
tness or to waive any of the foregoing terms
of sale and none shall be binding on Evolution
Power Tools. Questions relating to this limited
warranty should be directed to the company’s
head ofce, or call the appropriate Helpline
number.
GENERAL SAFETY RULES
WARNING: When using electric tools,
basic safety precautions should always be
followed to reduce the risk of re, electric
shock and personal injury.
Please read all of these instructions before
attempting to operate this machine. Save this
manual for future reference.
1. Keep work area clear. Cluttered work
areas invite accidents.
2. Consider work area environment. Do
not expose tools to rain. Do not use tools
in damp or wet locations. Keep work area
well lit. Do not use tools in the presence of
ammable liquids or gases.
3. Guard against electric shock. Avoid
body contact with earthed or grounded
surfaces (e.g. pipes, radiators, ranges,
refrigerators).
4. Keep other people away. Do not let
others, especially children, come close to
the work, and touch the tool or the extension
lead. Keep them away from
the work area.
18V Li-Ion
Angle Grinder
4
5. Store idle tools. When not in use, tools
should be stored in a dry locked-up place,
out of reach of children.
6. Do not force the tool. It will do the job
better and safer at the rate for which it was
intended.
7. Use the right tool. Do not force small
tools to do the job of a heavy duty tool. Do
not use tools for purposes not intended; for
example do not use circular saws to cut tree
limbs or logs.
8. Dress properly. Do not wear loose
clothing or jewellery, they can be caught
in moving parts. Non-skid footwear is
recommended when working outdoors.
Wear protective hair covering to contain
long hair.
9. Use protective equipment. Use safety
glasses. Use face or dust mask if working
operations create dust.
10. Connect dust extraction equipment.
If the tool is provided for the connection of
dust extraction and collection equipment,
ensure these are connected and
properly used.
11. Do not abuse the cord. Never yank
the cord to disconnect it from the socket.
Keep the cord away from heat, oil and sharp
edges.
12. Secure work. Where possible, use
clamps or a vice to hold the work. It’s much
safer than using your hand.
13. Don’t over reach. Keep proper footing
and balance at all times.
14. Maintain tools with care. Keep
cutting tools sharp and clean for better
and safer performance. Follow instructions
for lubricating and changing accessories.
Inspect tool cords periodically and, if
damaged, have them repaired by an
authorised service facility. Inspect extension
cord periodically and replace immediately if
damaged. Keep handles dry, clean and free
from oil and grease.
15. Disconnect tools. When not in use,
before any servicing and when changing
accessories such as blades, bits, cutters,
disconnect tool from the power source.
16. Remove adjusting keys and spanners.
Form the habit of checking to see the keys
and adjusting spanners are removed from
the tool before turning it on.
17. Avoid unintentional starting. Ensure
switch is in “off” position when plugging in.
18. Use outdoor extension leads. When
the tool is used outdoors, use only extension
cords intended for outdoor use and so
marked.
19. Stay alert. Watch what you are doing,
use common sense and do not operate the
tool when you are tired.
20. Check damaged parts. Before further
use of tool, it should be carefully checked
to determine that it will operate properly
and perform the intended function. Check
for alignment of moving parts, mountings
and any other components that may affect
its operation. A guard or other part that is
damaged should be properly repaired or
replaced by an authorised service centre
unless otherwise indicated in this instruction
manual. Have defective switches replaced
by an authorised service centre. Do not use
the tool if the switch does not turn it on and
off.
21. WARNING. The use of any accessory or
attachment other than one recommended in
this instruction manual may present a risk of
personal injury.
22. Have your tool repaired by a qualied
person. This electric tool complies with
relevant safety rules. Repairs should only
be carried out by qualied persons using
original spare parts. Otherwise this may
result in considerable danger to the user.
HEALTH ADVICE
WARNING: When drilling, sanding, sawing
or grinding, dust particles will be produced.
In some instances, depending on the
materials you are working with, this dust can
be particularly harmful to you (e.g. lead from
old gloss paint).You are advised to consider
the risks associated with the materials you
are working with and to reduce the risk of
exposure.
Loading...