User Manual
PT-SP-HD12UHD
User Manual
4K HDMI Splitter 1x2 4K (60Hz 4:4:4) HDR
Model PT-SP-HD12UHD
Designed in Germany
© 2017 PureLink GmbH All rights reserved. VersionV1.0
User Manual
PT-SP-HD12UHD
Preface
Read this user manual carefully before using the product. Pictures shown in this
manual are for reference only. Different model layouts and specifications are subject
to the physical product.
This manual is for operation instructions only, not for any maintenance usage.
In the constant effort to improve our product, we reserve the right to make changes in
functions or parameters without prior notice or obligation.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this
manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in
a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever measures
may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
User Manual
PT-SP-HD12UHD
REACH | 1907/2006/EU
ROHS | 2011/65/EU
PureLink hereby declares that this product PureTools PT-SP-HD12UHD complies
with Directives 1907/2006/EU und 2011/65/EU.
EMC / LVD (Electro Magnetic Compatibility / Low Voltage Directive)
PureLink GmbH hereby declares that this product PureTools PT-SP-HD12UHD
complies with Directives 2014/30/EU and 2014/35/EU. The full text of the EU
Declaration of Conformity is available at the following Internet address:
http://www.purelink.de/ce/4251364706909 _CE.pdf
User Manual
PT-SP-HD12UHD
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before
using the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing
material for possible future shipment.
Follow basic safety precautions to reduce the risk of fire, electrical shock and
injury to persons.
Do not dismantle the housing or modify the module. It may result in electrical
shock or burn.
Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or
install this product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment
damage. If an object or liquid falls or spills on to the housing, unplug the
module immediately.
Do not twist or pull by force ends of the optical cable. It can cause
malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the
power to the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
User Manual
PT-SP-HD12UHD
Contents
1. Introduction .................................................................................................................................. 1
1.1 Introduction to PT-SP-HD12UHD .................................................................................. 1
1.2 Feature ................................................................................................................................ 1
1.3 Packing List ........................................................................................................................ 2
2. Panel Description ........................................................................................................................ 3
3. System Connection ..................................................................................................................... 5
3.1 Usage Precaution .............................................................................................................. 5
3.2 System Diagram ................................................................................................................ 5
3.3 Connection Procedure .................................................................................................... 6
3.4 EDID Management ............................................................................................................ 7
3.5 Application ......................................................................................................................... 7
4. Specification ................................................................................................................................. 8
4.1 Supported Input Video Format ..................................................................................... 9
5. Panel Drawing ........................................................................................................................... 10
6. Troubleshooting & Maintenance .......................................................................................... 11
7. After-Sales Service ................................................................................................................... 12
User Manual
PT-SP-HD12UHD
1
1. Introduction
1.1 Introduction to PT-SP-HD12UHD
The PT-SP-HD12UHD is a HDMI splitter featuring the capability to repeat HDMI or DVI
source to 2 displays synchronously. Compliance with HDMI2.0& HDCP2.2,
PT-SP-HD12UHD provides comprehensive resolution capacities up to 4K& 1080p 3D.
It’s capable to automatically recognize the resolution and HDCP compliant status of
the input signal. Input signal will be automatically equalized for reliable transmission
with proper EDID Management.
Moreover, PT-SP-HD12UHD supports convenient online update through USB port.
1.2 Feature
2 simultaneous HDMI outputs
Support Hot-plug
Support HDMI2.0& HDCP2.2 and is backwards compatible with all previous HDMI
standards
The highest resolution is up to 4Kx2K@60Hz 4:4:4
Transmit 4Kx2K signal for 10m via AWG24 HDMI cable
High bandwidth: 18Gbps
Auto-identify input resolution
Support EDID management, automatically adopt the resolution of the first
detected display from port 1~2
Intuitive indicator for connection status& input HDCP compliance status
Convenient online firmware update
User Manual
PT-SP-HD12UHD
2
1.3 Packing List
1 x PT-SP-HD12UHD
2 x Mounting Ears
4 x Screws
4 x Plastic Cushions
1 x Power Adapter (DC 5V 2A)
1 x User Manual
Note: Please contact your distributor immediately if you found any damage or defect in
the components.
User Manual
PT-SP-HD12UHD
3
2. Panel Description
No.
Name
Description
①
Power indicator
Illuminate red once powered on
②
Input HDCP
compliant Indicator
Indicate the HDCP compliant status of the input signal
OFF: No HDMI traffic (no picture) or abnormal link
GREEN: Traffic with HDCP
Blinking GREEN: Traffic without HDCP
③
Output signal
Indicators
Illuminate green when there is HDMI output,
correspond to HDMI OUTPUT 1~2 separately.
④
FW
USB port for firmware updating.
Note: Firmware updated need auxiliary equipment,
please contact with our after-sales department for
more details.
⑤
IN
HDMI input port. Connect with HDMI source device
such as Blu-ray DVD.
⑥
OUT1& OUT2
HDMI output ports, connect to HDMI displays,
automatically capture the input resolution.
⑦ '
DC 5V
Plug a DC 5V power adapter for power.
OUT 2
OUT 1
IN
DC 5VIN 1 2 FW
1
2
3
4
5
6
7
User Manual
PT-SP-HD12UHD
4
Note:
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
Output HDCP compliant status depends on input signal. When the input signal is
with HDCP, then output signal is with HDCP and vice versa.
HDMI signal contains both HDMI video signal and embedded audio signal (PCM,
Dolby Digital, DTS, DTS-HD), while DVI signal contains solely video signal.
The PT-SP-HD12UHD is capable to switch input signal format according to the
displays.
For example, when the input signal is HDMI and the display can only support DVI
signal, PT-SP-HD12UHD will switch the signal into DVI format.
EDID Management: automatically manage output signal (e.g. output resolution) to
fit all displays.
User Manual
PT-SP-HD12UHD
5
3. System Connection
3.1 Usage Precaution
Verify all components and accessories included before installation.
System should be installed in a clean environment with proper temperature and
humidity (see page8 for limits).
All of the power switches, plugs, sockets and power cords should be insulated and
safe.
All devices should be connected before power on.
3.2 System Diagram
The following diagram illustrates typical input and output connections that can be
utilized with PT-SP-HD12UHD:
4K Blu-ray
HDTV
Projector
HDMI IN:
HDMI OUT:
User Manual
PT-SP-HD12UHD
6
3.3 Connection Procedure
Step1. Connect a HDMI/ DVI source device (e.g. Blue-ray DVD) to the IN socket of
PT-SP-HD12UHD with HDMI cable.
Step2. Connect HDMI displays to OUT 1 and OUT 2 sockets of PT-SP-HD12UHD with
HDMI cables.
Step3. Plug a DC 5V 2A power adapter to the power port of PT-SP-HD12UHD.
Note: All the ports support hot-plug. It’s important to know that hot plugging a display
may result in splash screen at output ends.
User Manual
PT-SP-HD12UHD
7
3.4 EDID Management
The PT-SP-HD12UHD comprises 1 HDMI input port & 2 HDMI output ports, and it
possess built-in EDID management function.
1) When all output ports are connected with displays, the source device will gain
the EDID data from the display connected output 1 port. At this point, if you
disconnect the output 1 display and want the source device to gain the EDID
from the output 2, the PT-SP-HD12UHD need to be restarted.
2) All connected displays should be compatible, for example: when output 1
connects with a 1080p display, PT-SP-HD12UHD will select 1080p as output
resolution and distribute 1080p signal to displays connected to output 1~2. If the
display connected to output 2 don’t support 1080p signal, there will be no
output on the display.
3.5 Application
The PT-SP-HD12UHD has a good application in various occasions, such as computer
realm, monitoring, conference room, big screen displaying, television education,
command & control center and smart house etc.
User Manual
PT-SP-HD12UHD
8
4. Specification
Video Input
Input
1 HDMI
Input Connector
1 female type A HDMI 2.0
Video Output
Output
2 HDMI
Output Connector
2 female type A HDMI 2.0
Video General
Max data rate
18Gbit/s
Max Resolution
4Kx2K@60Hz 4:4:4
HDCP
Compliant with HDCP2.2,and is backward compatible to
HDCP1.4
EDID
In-built EDID management
HDMI Embedded Audio
Support Dolby D (True HD)/ DTS (HD-Master Audio)/
PCM
General
Temperature
0~ 55℃
Relative Humidity
10% ~ 90%
Power Supply
Input:100V~240V AC; Output: DC5V 2A
Power Consumption
4.5W(Max)
Net Weight
118g
Dimension (W*H*D)
102.4mmx 16mmx 70.4mm
User Manual
PT-SP-HD12UHD
9
4.1 Supported Input Video Format
Input Resolution
HDMI
DVI
720 x 480@60Hz
720 x 480I@30Hz
720 x 576@50Hz
720 x 576I@25Hz
1280 x720@50Hz
1280 x720@60Hz
1920 x 1080@25Hz
1920 x 1080@50Hz
1920 x 1080@60Hz
1920 x 1080I@25Hz
1920 x 1080I@30Hz
3840 x 2160@25Hz
3840 x 2160@30Hz
3840 x 2160@60Hz
1080P 3D@60Hz
Note: The PT-SP-HD12UHD supports 4k& 3D HDMI signals, please adopt quality HDMI
cables compliant with HDMI2.0 for better transmission when connecting 4K or 3D
sources.
User Manual
PT-SP-HD12UHD
10
5. Panel Drawing
OUT 2
OUT 1
IN
DC 5V
IN 1 2 FW
PT-SP-HD12UHD
1x2
Splitter
4K (60Hz 4:4:4) HDR
102.4 mm
70.4 m
m
m
User Manual
PT-SP-HD12UHD
11
6. Troubleshooting & Maintenance
Problems
Potential Causes
Solutions
Color losing or no video
signal output in HDMI
display
The connecting cables
may not be connected
correctly or it may be
broken.
Check whether the cables
are connected correctly
and in working condition.
The display is not
compatible with the
present output resolution.
Make sure the resolution
of the display(s) is
compatible with the
present resolution.
No HDMI signal output in
PT-SP-HD12UHD while
local HDMI input is in
normal working state
The connecting cables
may not be connected
correctly or it may be
broken.
Check whether the cables
are connected correctly
and in working condition.
Splash screen in output
devices
Poor quality of the
connecting cable
Change for another cable
of good quality.
Static becomes stronger
when connecting the
video connectors
Bad grounding
Check the grounding and
make sure it is connected
well.
If your problem persists after following the above troubleshooting steps, seek further
help from authorized dealer or our technical support.
User Manual
PT-SP-HD12UHD
12
7. After-Sales Service
If there appear some problems when running the product, please check and deal with
the problems referring to this user manual. Any transport costs are borne by the users
during the warranty.
1) Product Limited Warranty: The product will be free from defects in materials and
workmanship for two years (The purchase invoice shall prevail).
Proof of purchase in the form of a bill of sale or receipted invoice which is
evidence that the unit is within the Warranty period must be presented to obtain
warranty service.
2) What the warranty does not cover (servicing available for a fee):
Warranty expiration.
Factory applied serial number has been altered or removed from the product.
Damage, deterioration or malfunction caused by:
Normal wear and tear.
Use of supplies or parts not meeting our specifications.
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
Damage caused by force majeure.
Servicing not authorized by distributor.
Any other causes which does not relate to a product defect.
Delivery, installation or labor charges for installation or setup of the product.
3) Technical Support: For any questions or problems, contact your distributor or
reseller and tell them the respective product name and version, the detailed
failure situation as well as the formation of the cases.
User Manual
PT-SP-HD12UHD
User Manual
PT-SP-HD12UHD
User Manual
PT-SP-HD12UHD
Asking for Assistance
Technical Support:
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99
Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de
Loading...