Page 1
PM Series Fiber Optic Extenders
Owner’s Manual
PM Series Fiber Optic Standalone and Wall-plate type Extender
PureLinkTM
535 East Crescent Ave
Ramsey NJ 07446, USA
Tel: 201.488.3232
Fax: 201.621.6118
Website : www.purelinkav.com
E-mail : info@purelinkav.com
For Technical Support, contact us at
support@purelinkav.com
Page 2
PureLink by Dtrovision
2
TABLE OF CONTENTS
Chapter 1. Introduction
1.1 Safety Precautions --------------------------------------------------------------------------- 3
1.2 Product Introduction -------------------------------------------------------------------------- 4
1.3 Package Contents ----------------------------------------------------------------------------- 4
Chapter 2. Features and Specifications
2.1 Features ----------------------------------------------------------------------------------------- 5
2.2 Transmitter Specifications ------------------------------------------------------------------ 6
PM-FT101 --------------------------------------------------------------------------------------- 6
PM-FT102 --------------------------------------------------------------------------------------- 8
PM-FT103 --------------------------------------------------------------------------------------- 9
Transmitters Compatibility Chart ----------------------------------------------------------- 12
2.3 Receiver Specifications ---------------------------------------------------------------------- 13
PM-FR101 -------------------------------------------------------------------------------------- 13
PM-FR102 -------------------------------------------------------------------------------------- 14
PM-FR103 -------------------------------------------------------------------------------------- 16
Receivers Compatibility Chart ------------------------------------------------------------- 19
2.4 Operation and Reliability Specification --------------------------------------------------- 20
Chapter 3. Installation and Operating Instruction
3.1 Installation --------------------------------------------------------------------------------------- 21
3.2 Operating Instruction -------------------------------------------------------------------------- 21
3.3 Cable Termination ----------------------------------------------------------------------------- 23
3.4 Connector Pin Assignment ------------------------------------------------------------------ 24
Chapter 4. Additional Information
4.1 Warranty ------------------------------------------------------------------------------------------ 26
4.2 FCC/CE Statement --------------------------------------------------------------------------- 27
Page 3
PureLink by Dtrovision
3
Chapter 1. Introduction
1.1 Safety Precautions
When using and installing Dtrovision PureLink product, adhere to the following basic safety
precautions.
Read and understand all instructions before using and installing this product.
The safety and operating instructions should be retained for future reference.
Always use the correct external power supply (indicated on the product label) when
operating this unit.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
Mishandling of this product may lead to a fire or explosion hazard.
Do not place any heavy objects or equipment on top of the product.
Keep away from wet, magnetic, and flammable surfaces or substances.
Air vents should be kept clean and unobstructed at all times.
Any external impact may cause damage to the operation of this unit.
Be sure this product is properly grounded (earthed) in order to prevent the risk of
electrical shock.
Turn off and unplug power before adding or removing Input/Output Boards.
Input/Output Boards may be damaged when they are replaced with power turned on.
Use surge protectors and/or AC line conditioners when powering this product.
Only use a fuse(s) with the correct fuse rating in your enclosure.
Make sure the product is on or attached to a stable surface.
If you experience any malfunctioning of product or have any question as to operation
of the product, please contact our customer service center.
PureLinkTM
Tel: 201.488.3232
Email: support@purelinkav.com
Page 4
PureLink by Dtrovision
4
1.2 Product Introduction
Pure fiber optic cable for video, audio, and control signal
PM series Fiber Optic (2 LC) extension system is designed to transmit video (DVI, HDMI
or VGA), audio (Embedded or analog stereo audio), control (RS232/422 and IR) over a
pure LC to LC fiber optic cable for long distance up to 6,600ft. This optical connection
enables to minimize electrical noise and EMI free that is ideal for long distance extension
of high definition HDMI/DVI or VGA video signal, HDMI embedded audio or 3.5mm
stereo analog audio, and control signal.
1.3 Package Contents
Please make sure all of the following items are included in the package:
1) One of PM-FT101, FT102, FT103 Transmitter Module or
2) One of PM-FR101, FR102, FR103 Receiver Module
3) 5pin Phoenix Connector for RS-232/422
4) DC 12V Power Supply Unit with a Power Cord
Page 5
PureLink by Dtrovision
5
Chapter 2. Features and Specifications
2.1 Features
▶ Transmitters directly compatible with PM Fiber Optic Input Board
PM Fiber Optic (2 LC) Transmitters can send signal directly to PM series Matrix
Router's Fiber Optic Input Board, eliminating the need of matching Receiver.
▶ Receivers directly compatible with PM Fiber Optic Output Board
PM Fiber Optic (2 LC) Receivers can receive signal directly from PM series Matrix
Router's Fiber Optic Output Board, eliminating the need of matching Transmitter.
▶ HDMI v1.4, 3D Support
Adopting latest HDMI version 1.4 enables to support 3D, 48-Bit Deep Color, 4K x 2K
resolution and 7.1 Channel Dolby TruHD & DTS MasterHD
▶ Auto-EDID (EDID Library, Emulation)
PureLink's EDID library and emulation features failsafe EDID capture & storage to
provide constant and continuous EDID for source devices.
▶ HDCP Compliant
▶ Various Transmitter and Receiver Choices
There are three different type of transmitters and three different type of receivers to
make today's sophisticated digital AV environment simple and flexible.
▶ RF6 1RU Rack Mountable Version Available
PM-FT101, PM-FT102, PM-FR101, and PM-FR102 are also available in PureLink's
popular RF6 Rack Mountable Extension Center Modules.
▶ Analog Support (VGA and Component)
On PM-FT102 and PM-FT103 series, there are two video inputs; DVI/HDMI and VGA,
which are selectable via front panel button or serial command when it is connected PM
series Matrix Router. VGA port is designed to take component (YPbPr) signal with
appropriate adapters or cables.
▶ USB Firmware Update
▶ Long Distance Transmission up to 6,600ft (2,000 m)
Page 6
PureLink by Dtrovision
6
▶ Plug-N-Play
▶ Resolutions up to WUXGA 1920x1200, HD 1080p @ 60Hz, and 4K2K
▶ Integrated Noise-cancellation and Error-correct Logic for both Input and Output
Ports to prevent any damage caused by Electrical Noise.
2.2 Specifications
Transmitters :
PM-FT101 : Standalone type (Loop Through)
Input: HDMI + 3.5mm stereo audio (x1) + RS-232/422
Output: Fiber Optic (2 LC) and HDMI Loop-Through
6,600ft, Compatible with PM-FIS4 input board
Front Connection Ports:
Power S/W: Power On/Off switch
Power LED: Power status indicator
Status LED: Video signal presence indicator
HDMI LED: HDMI signal indicator
EDID save S/W: EDID save button
EDID select S/W: EDID library function selection rotary switch
Firmware: USB firmware update port
Page 7
PureLink by Dtrovision
7
Back Connection Ports:
HDMI/DVI In: HDMI/DVI input port
HDMI/DVI Out: HDMI/DVI Loop-thru output port
Audio In: Stereo audio input port
2 LC: Fiber Optic output port
RS-232/422: RS-232/422 communication port
DC In: DC 12V Power port
Model Name
PM-FT101 (HDMI version), PM-FT102-D (DVI version)
Input Signal
Output Signal
Fiber Optical Output ( > -10dbm (after 6,600ft (2km) transmission))
DVI / HDMI (Loop-thru)
Extinction Ratio
> 4db (after 6,600ft (2km) transmission)
Data Transmission
Speed
3.4 Gbps/ch, Total 10.2 Gbps Max
Supporting Display
Resolutions
PC: VGA ~ WUXGA
(up to 1920 x 1200 @60Hz)
HDTV: 480i ~ 1080p, 2K4K
Max. Distance
Single Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 6,600 ft (2km)
Multi Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 1,650 ft (500m)
Connector Type
DVI 29P/HDMI 19P Female (x 2)
3.5mm Stereo Jack
2 LC Optical Connector
3P /3.5MM Terminal Block (for Power)
5P /3.5MM Terminal Block (for RS-232/422)
Mini USB (for firmware update)
Conformations
DVI 1.0 , HDMI 1.4
HDCP Compliance
Yes
Power Rating
DC +12V, 4Watts Max
Dimension
6.3' x 4.4' x 1.7' (160 x 112 x 42 mm)
Weight
1.43 lbs (0.65 Kg)
Page 8
PureLink by Dtrovision
8
PM-FT102 : Standalone type (2x1 switch)
Input: Selectable HDMI/DVI or VGA + 3.5mm stereo audio (x2) +
RS-232/422
Output: Fiber Optic (2 LC)
6,600ft, Compatible with PM-FIS4 input board
Front Connection Ports:
Power S/W: Power On/Off switch
Power LED: Power status indicator
Status LED: Video signal presence indicator
HDMI LED: HDMI signal indicator
VGA LED: VGA (or component) signal indicator
EDID save S/W: EDID save button
EDID select S/W: EDID library function selection rotary switch
Firmware: USB firmware update port
Back Connection Ports:
HDMI/DVI In: HDMI/DVI input port
VGA In: VGA (or component) input port
Audio In: Stereo audio input port
2 LC: Fiber Optic output port
RS-232/422: RS-232/422 communication port
DC In: DC 12V Power port
Page 9
PureLink by Dtrovision
9
Model Name
PM-FT102 (HDMI version), PM-FT102-D (DVI version)
Input Signal
Output Signal
Fiber Optical Output ( > -10dbm (after 6,600ft (2km) transmission))
Extinction Ratio
> 4db (after 6,600ft (2km) transmission)
Data Transmission
Speed
3.4 Gbps/ch, Total 10.2 Gbps Max
Supporting Display
Resolutions
PC: VGA ~ WUXGA
(up to 1920 x 1200 @60Hz)
HDTV: 480i ~ 1080p, 2K4K
Max. Distance
Single Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 6,600 ft (2km)
Multi Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 1,650 ft (500m)
Connector Type
DVI 29P/HDMI 19P Female (x 2)
3.5mm Stereo Jack
2 LC Optical Connector
3P /3.5MM Terminal Block (for Power)
5P /3.5MM Terminal Block (for RS-232/422)
Mini USB (for firmware update)
Conformations
DVI 1.0 , HDMI 1.4
HDCP Compliance
Yes
Power Rating
DC +12V, 4Watts Max
Dimension
6.3' x 4.4' x 1.7' (160 x 112 x 42 mm)
Weight
1.43 lbs (0.65 Kg)
PM-FT103 : Wall plate type (2x1 switch), 2 Gang Decora style, white finish.
Input: Selectable HDMI or VGA + 3.5mm stereo audio (x1) + RS-232
Output: Fiber Optic (2 LC)
6,600ft, Compatible with PM-FIS4 input board
Page 10
PureLink by Dtrovision
10
Front Connection Ports:
Power LED: Power status indicator
Status LED: Video signal presence indicator
HDMI LED: HDMI signal indicator
VGA LED: VGA (or component) signal indicator
EDID save S/W: EDID save button
EDID select S/W: EDID library function selection rotary switch
HDMI/DVI In: HDMI/DVI input port
VGA In: VGA (or component) input port
Audio In: Stereo audio input port
RS-232: RS-232 communication port
Back Connection Ports:
2 LC: Fiber Optic Output Port
DC In: DC 12V Power port
Model Name
PM-FT103
Input Signal
Output Signal
Fiber Optical Output ( > -10dbm (after 6,600ft (2km) transmission))
Page 11
PureLink by Dtrovision
11
Extinction Ratio
> 4db (after 6,600ft (2km) transmission)
Data Transmission
Speed
3.4 Gbps/ch, Total 10.2 Gbps Max
Supporting Display
Resolutions
PC: VGA ~ WUXGA
(up to 1920 x 1200 @60Hz)
HDTV: 480i ~ 1080p, 2K4K
Max. Distance
Single Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 6,600 ft (2km)
Multi Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 1,650 ft (500m)
Connector Type
HDMI 19P Female
VGA Female
3.5mm Stereo Jack
2 LC Optical Connector
3P /3.5MM Terminal Block (for Power)
3P /3.5MM Terminal Block (for RS-232)
Conformations
DVI 1.0 , HDMI 1.4
HDCP Compliance
Yes
Power Rating
DC +12V, 4Watts Max
Dimension
2 Gang Decora style, actual dimension will be updated
Weight
TBD
Transmitter Input Signal Characteristics
Input Signal
Description
Unit
Min
Typical
Max
Remarks
DC input
DC Voltage
VDC
11.5
12
12.5
Power
Consumption
Watts
13.5
13.8
14.4
VGA input
(15Pin)
Video Level
mVp-p
700
DVI input
(29Pin DVI)
Differential
Output
mVp-p
450
510
570
TMDS
Interface
HDMI input
(19Pin)
Differential
Output
mVp-p
400
600
TMDS
Interface
Page 12
PureLink by Dtrovision
12
Transmitter Output Signal Characteristics
Output Signal
Symbol
Unit
Min
Typical
Max
Remarks
Emission
Center
Wavelength
Λc1
Λc2
nm
1260
1480
1310
1550
1360
1580
Analog Video Signal Supported Resolution
- 640*480 60Hz
- 1024*768 60Hz
- 720*480p 60Hz
- 640*480 72Hz
- 1024*768 70Hz
- 720*576p 50Hz
- 640*480 75Hz
- 1024*768 75Hz
- 1280*720p 60Hz
- 640*480 85Hz
- 1024*768 85Hz
- 1280*720p 50Hz
- 800*600 56Hz
- 1280*1024 60Hz
- 1920*1080i 60Hz
- 800*600 60Hz
- 1280*1024 75Hz
- 1920*1080i 50Hz
- 800*600 72Hz
- 1280*1024 85Hz
- 1920*1080p 60Hz
- 800*600 75Hz
- 1600*1200 60Hz
- 1920*1080p 50Hz
- 800*600 85Hz
- 1920*1200 60Hz
Digital Video Signal Supported Resolution:
- PC resolution: VGA ~ WUXGA @ 60Hz (1920 x 1200 @ 60Hz)
- HDTV resolution: 480i ~ 1080p @ 60Hz, 4K2K
PM Fiber Optic Transmitter Compatibility Chart
Transmitters
Compatibility
PM-FT101
PM-FT102
PM-FT103
PM Extender Compatibility
PM-FR101
PM-FR102
PM-FR103
PM-FR101
PM-FR102
PM-FR103
PM-FR101
PM-FR102
PM-FR103
Page 13
PureLink by Dtrovision
13
RF6 Compatibility
PM-FR101-RF6
PM-FR102-RF6
PM-FR101-RF6
PM-FR102-RF6
PM-FR101-RF6
PM-FR102-RF6
PM Matrix Board
Compatibility
PM-FIS4
PM-FIS4
PM-FIS4
Receivers :
PM-FR101 : Standalone type.
Input: Fiber Optic (2 LC)
Output: HDMI + 3.5mm stereo audio + RS-232/422
6,600ft, Compatible with PM-FOS4 output board
Front Connection Ports:
Power S/W: Power On/Off switch
Power LED: Power status indicator
Status LED: Video signal presence indicator
Firmware: USB firmware update port
Back Connection Ports:
HDMI/DVI Out: HDMI/DVI output port
Audio Out: Stereo audio output port
2 LC: Fiber Optic Input port
RS-232/422: RS-232/422 communication port
DC In: DC 12V Power port
Page 14
PureLink by Dtrovision
14
Model Name
PM-FR101 (HDMI version), PM-FR101-D (DVI version)
Input Signal
Extinction Ratio
> 4db (after 6,600ft (2km) transmission)
Output Signal
3.5mm stereo audio
Data Transmission
Speed
3.4 Gbps/ch, Total 10.2 Gbps Max
Supporting Display
Resolutions
PC: VGA ~ WUXGA
(up to 1920 x 1200 @60Hz)
HDTV: 480i ~ 1080p, 2K4K
Max. Distance
Single Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 6,600 ft (2km)
Multi Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 1,650 ft (500m)
Connector Type
DVI 29P/HDMI 19P Female
3.5mm Stereo Jack
2 LC Optical Connector
3P /3.5MM Terminal Block (for Power)
5P /3.5MM Terminal Block (for RS-232/422)
Mini USB (for firmware update)
Conformations
DVI 1.0 , HDMI 1.4
HDCP Compliance
Yes
Power Rating
DC +12V, 2.0 Watts Max
Dimension
6.3' x 4.4' x 1.7' (160 x 112 x 42 mm)
Weight
1.43 lbs (0.65 Kg)
PM-FR102 : Standalone type. Built-in auto scaler
Input: Fiber Optic (2 LC)
Output: HDMI + 3.5mm stereo audio + RS-232/422
6,600ft, Compatible with PM-FOS4 output board
Page 15
PureLink by Dtrovision
15
Front Connection Ports:
Power S/W: Power On/Off switch
LCD Display: 16*2 LCD display
▲▼◀▶: Menu navigation button
MENU: Menu and Enter button
EXIT: Cancel and Exit button
Back Connection Ports:
HDMI/DVI Out: HDMI/DVI output port
Audio Out: Stereo audio output port
2 LC: Fiber Optic Input port
RS-232/422: RS-232/422 communication port
DC In: DC 12V Power port
Model Name
PM-FR102 (HDMI version), PM-FR102-D (DVI version)
Input Signal
Extinction Ratio
> 4db (after 6,600ft (2km) transmission)
Output Signal
3.5mm stereo audio
Data Transmission
Speed
3.4 Gbps/ch, Total 10.2 Gbps Max
Supporting Display
Resolutions
PC: VGA ~ WUXGA
(up to 1920 x 1200 @60Hz)
HDTV: 480i ~ 1080p, 2K4K
Page 16
PureLink by Dtrovision
16
Max. Distance
Single Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 6,600 ft (2km)
Multi Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 1,650 ft (500m)
Connector Type
DVI 29P/HDMI 19P Female
3.5mm Stereo Jack
2 LC Optical Connector
3P /3.5MM Terminal Block (for Power)
5P /3.5MM Terminal Block (for RS-232/422)
Mini USB (for firmware update)
Conformations
DVI 1.0 , HDMI 1.4
Image Scaler
Sigma Design GF9452A
HDCP Compliance
Yes
Power Rating
DC +12V, 4 Watts Max
Dimension
6.3' x 5.7' x 1.7' (160 x 145 x 42 mm)
Weight
1.77 lbs (0.80 Kg)
User Control
6 Buttons Control (LCD and OSD)
PM-FR103 : Wall plate type, 2 Gang Decora style, white finish.
Input: Fiber Optic (2 LC)
Output: HDMI + 3.5mm stereo audio + RS-232
6,600ft, Compatible with PM-FOS4 output board
Front Connection Ports:
Power LED: Power status indicator
Status LED: Video signal presence indicator
Page 17
PureLink by Dtrovision
17
HDMI Out: HDMI output port
Audio Out: Stereo audio output port
RS-232: RS-232 communication port
Back Connection Ports:
2 LC: Fiber Optic Input port
DC In: DC 12V Power port
Model Name
PM-FR103
Input Signal
Extinction Ratio
> 4db (after 6,600ft (2km) transmission)
Output Signal
3.5mm stereo audio
Data Transmission
Speed
3.4 Gbps/ch, Total 10.2 Gbps Max
Supporting Display
Resolutions
PC: VGA ~ WUXGA
(up to 1920 x 1200 @60Hz)
HDTV: 480i ~ 1080p, 2K4K
Max. Distance
Single Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 6,600 ft (2km)
Multi Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 1,650 ft (500m)
Connector Type
HDMI 19P Female
3.5mm Stereo Jack
2 LC Optical Connector
3P /3.5MM Terminal Block (for Power)
3P /3.5MM Terminal Block (for RS-232)
Conformations
DVI 1.0 , HDMI 1.4
Image Scaler
Sigma Design GF9452A
HDCP Compliance
Yes
Power Rating
DC +12V, 2 Watts Max
Dimension
2 Gang Decora style, actual dimension will be updated
Weight
TBD
Page 18
PureLink by Dtrovision
18
Receiver Input Signal Characteristics
Input Signal
Description
(Symbol)
Unit
Min
Typical
Max
Remarks
DC input
DC Voltage
VDC
11.5
12
12.5
Power
Consumption
Watts
13.5
13.8
14.4
Emission
Center
Wavelength
Λc1
Λc2
nm
1260
1480
1310
1550
1360
1580
Receiver Output Signal Characteristics
Output Signal
Description
Unit
Min
Typical
Input Signal
Remarks
HDMI Output
(19Pin)
Differential
Output
mVp-p
400 600
TMDS
Interface
Scaling Receiver (PM-FR102/PM-FR102-D) Supported Output Resolution
- Auto Time Set
- 1920*1080p 50Hz
- 1280*1024 75Hz
- 720*483p 59.94Hz
- 1920*1080p 59.94Hz
- 1280*1024 85Hz
- 720*576p 50Hz
- 1920*1080p 60Hz
- 1360*768 60Hz
- 1280*720p 50Hz
- 800*600 60Hz
- 1366*768 50Hz
- 1280*720p 59.94Hz
- 800*600 75Hz
- 1400*900 60Hz
- 1280*720p 60Hz
- 1024*768 60Hz
- 1600*1200 60Hz
- 1920*1080i 25(50)Hz
- 1024*768 75Hz
- 1920*1200 60Hz
- 1920*1080i 29.7(59.94)Hz
- 1024*768 85Hz
- 1920*1080p 60Hz
- 1920*1080i 30(60)Hz
- 1280*1024 60Hz
Scaling Receiver's Output resolution can be set via front panel control button or serial
command from PM Series Matrix Router.
OE: Output Extender Scaler Timing Select
The "OE" is an initiation command for Output Extender Scaler timing selection. The
characters and numbers that follow the "OE" command tell the system, set scaling
Page 19
PureLink by Dtrovision
19
timing on selected Output. The last character “!” is found at the end of a command
code which tells the system to execute the command. For a complete list of command
characters and their functions, see examples below.
OE command only applies to the HDMI with scaling Board and CAT5e/Fiber Output
Board with PM-CR102 (CAT5e) and PM-FR102 (Fiber) Extender Receiver.
T00
Auto
T09
1080p (50Hz)
T18
SXGA (1280x1024@75Hz)
T01
480p (60Hz)
T10
1080p (59Hz)
T19
SXGA (1280x1024@85Hz)
T02
576p (50Hz)
T11
1080p (60Hz)
T20
UXGA (1600x1200@60Hz)
T03
720p (50Hz)
T12
SVGA (800x600@60Hz)
T21
1360x768@60Hz
T04
720p (59Hz)
T13
SVGA (800x600@75Hz)
T22
1366x768@60Hz
T05
720p (60Hz)
T14
XGA (1024x768@60Hz)
T23
1440x900@60Hz
T06
1080i (50Hz)
T15
XGA (1024x768@75Hz)
T24
1920x1200@60Hz
T07
1080i (59Hz)
T16
XGA (1024x768@85Hz)
T08
1080i (60Hz)
T17
SXGA (1280x1024@60Hz)
Example:
Command Codes
Action
*255OEO01T00!
Set Output 1 Extender Scaler timing to Auto
*255OEO02T11!
Set Output 2 Extender Scaler timing to 1080p
PM Fiber Optic Receiver Compatibility Chart
Receivers
Compatibility
PM-FR101
PM-FR102
PM-FR103
PM Extender Compatibility
PM-FT101
PM-FT102
PM-FT103
PM-FT101
PM-FT102
PM-FT103
PM-FT101
PM-FT102
PM-FT103
RF6 Compatibility
PM-FT101-RF6
PM-FT102-RF6
PM-FT101-RF6
PM-FT102-RF6
PM-FT101-RF6
PM-FT102-RF6
PM Matrix Board
Compatibility
PM-FOS4
PM-FOS4
PM-FOS4
Page 20
PureLink by Dtrovision
20
Operation and Reliability Specification
1. Operating Environment
Temperature : 50F ~ 104F (10℃~ 40℃)
Humidity : 10% ~ 80%
Altitude : 3,000m Max.
2. Transit Environment
Temperature : -13F ~ 140F (-25℃~ 60℃)
Humidity : 5% ~ 95%
Altitude : 15,000m Max.
3. Storage Environment
Temperature : -4F ~ -49F (-20℃~ 45℃)
Humidity : 5% ~ 95%
Altitude : 3,000m Max.
4. Reliability
MTBF: 90% at over 50,000 hours aging test
In compliance with LCD Monitor reliability test standard
Page 21
PureLink by Dtrovision
21
Chapter 3. Installation and Operating Instruction
Installation Connection Instruction
1. Turn off both the video source and the display before connecting any cables
2. Connect LC terminated fiber optic cable between transmitter and receiver according to
the picture below;
3. Connect DVI, HDMI, or VGA cable between the source and the transmitter AND the
receiver and the display
4. Connect the power supply unit to both transmitter and receiver module
5. Turn on display
6. Turn on source
Operating Instruction
EDID
Page 22
PureLink by Dtrovision
22
PM series Extenders provide Auto EDID management system; easy and fail safe way to
handle EDID, via EDID library system and EDID emulation.
What's EDID?
Extended Display Identification Data (EDID) is an information set that digital display
provides to describe its capabilities to a Video source. Video source will know what kinds of
displays are connected and it will determine which resolution to Output according to the
EDID information received from the display.
The EDID normally includes manufacturer name and serial number, sets of capable
resolution including native resolution, supported timing, pixel mapping data (for digital
displays only) and etc.
In a digital connectivity environment; in order to support the maximum resolution of
connected monitor, EDID handshake is a critical because improper EDID handshake
between sources to the display will result in no image on the display.
EDID handshake may sound simple; however, with multiple peripheral devices within the
chain, display's EDID information easily get lost or blocked while it is traveling to the source
device.
PM series Extenders provide Auto EDID management system to meet today's sophisticated
digital connectivity integration environment.
Auto EDID management system
EDID library
14 most widely used EDID data is pre-programmed internal EEPROM chipset which user
can take and save onto the PM series transmitter.
EDID library list
Factory default EDID is set to 1920 x 1080p@60Hz
Page 23
PureLink by Dtrovision
23
By optimizing factory default EDID and EDID library feature, in most cases, PM series
Extender will work out of the box without any additional configuration.
Emulation
The user can easily save an EDID data from any display devices directly onto the PM series
Transmitter. By saving display device's EDID information on the Transmitter, it will act as a
display to the Video source.
* Connect display device to PM series Transmitter's HDMI/DVI port and then press EDID
S/W button. It will copy and save display’s EDID information to Transmitter’s EEPRom.
Note) There may be display devices that are not allowing other device to
emulate its EDID data.
Note) Certain EDID data may not be compatible with some devices, in this case,
it is recommended to user scaling option receivers.
3.1 Cable Termination
RS-232/422 cable
RS-232/422 Cable Termination
5-pin Phoenix connector is used for RS-232/422 communication between PM extender
Tx/Rx to the devices that are attached.
* Pinout from the left
Pin
RS-232
RS-422
1
Tx
Tx +
2
Not used
Tx - 3 Ground
Ground
4
Rx
Rx +
5
Not used
Rx -
Page 24
PureLink by Dtrovision
24
Connector Pin Assignment
DC Input
Part Number
Pin No.
Description
Remark
ECH350R-03
1
VCC( DC12V)
2 GND
3 GND
RS232/422
Part Number
Pin No.
Description
Remark
ECH350R-03
1
TXD
2 RXD
3 GND
DVI-D Input & Output
Part Number
Pin No.
Description
Remark
DVI-D 29pin
1
TMDS DATA 2M
2 TMDS DATA 2P
3
TMDS DATA 2/4 Shield
4 TMDS DATA 4M(N.C)
5
TMDS DATA 4P(N.C)
6
DDC Clock
7 DDC Data
8
N.C
9 TMDS DATA 1M
10
TMDS DATA 1P
11
TMDS DATA 1/3 Shield
12
TMDS DATA 3M(N.C)
13
TMDS DATA 3P(N.C)
14
5V
15
GND
16
Hot Plug Detect
17
TMDS DATA 0M
18
TMDS DATA 0P
19
TMDS DATA 0/5 Shield
20
TMDS DATA 5M(N.C)
21
TMDS DATA 5P(N.C)
Page 25
PureLink by Dtrovision
25
22
TMDS DATA Clock Shield
23
TMDS Clock P
24
TMDS Clock M
HDMI Input & Output
Part Number
Pin No.
Description
Remark
HDMI 19pin
1
TMDS DATA 2P
2
TMDS DATA 2 Shield
3
TMDS DATA 2M
4
TMDS DATA 1P
5
TMDS DATA 1 Shield
6
TMDS DATA 1M
7
TMDS DATA 0P
8
TMDS DATA 0 Shield
9
TMDS DATA 0M
10
TMDS Clock P
11
TMDS Clock Shield
12
TMDS Clock M
13
CEC
14
RESERVED
15
DDC Clock
16
DDC DATA
17
GND
18
+5v
19
Hot Plug Detect
Page 26
PureLink by Dtrovision
26
Chapter 4. Additional Information
Manufacturer’s Warranty (2-Year)
Dtrovision warrants this PM series Matrix Router to be free from defects in workmanship
and materials, under normal use and service, for a period of two (2) year from the date
of purchase from Dtrovision or its authorized resellers.
If the product does not operate as warranted during the applicable warranty period,
Dtrovision shall, at its option and expense, execute one of the following as necessary:
1. Repair the defective product or part
2. Deliver to customer and equivalent product or part to replace the defective item
3. Refund to customer the purchase price paid for the defective product
All products that are replaced become the property of Dtrovision, LLC. Replacement
products may be new or reconditioned. Repaired or replacement products or parts
come with a 90-day warranty or the remainder of the warranty period. Dtrovision shall
not be responsible for any software, firmware, information, or memory data loss of
contained in, stored on, or integrated with any products returned to Dtrovision for repair
under warranty.
Customer Service
Any customer service inquiries can be submitted electronically through the Q&A form on our
website at www.purelinkav.com. For immediate assistance please contact us at (201)
488-3232 to reach our customer care or tech support team.
Page 27
PureLink by Dtrovision
27
FCC/CE Statement
This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE
certification. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must not accept any interference received,
including interference that may cause undesired operation. This equipment has been tested
and found to comply with the limits for a Class A digital device, pursuant to part 15 and 2 of
FCC Rules and EN 55022/55024/61000-3 for CE certification. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated
in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and. if not installed and used in accordance with the instruction guide,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult a service representative for help.
Properly shielded and grounded cables and connectors must be used in order to comply
with FCC/CE emission limits. Changes or modifications not expressly approved by the
party responsible for compliance could void the user s authority to operate the equipment.
UL Statement
This device has completed a UL Commercial Inspection and Testing Services for the
multimode HDMI cable complied with VW-1 under UL 758. it is validated by the UL file
number SV2038 and project number 04CA05353.
Loading...