Pure Acoustics WMP-215 Owner's Manual

WMP-215

Professional Portable Wireless Microphone System

OWNER'S MANUAL

Getting your WMP-215, wireless MIC and Receiver ready for use.

1. Screw off the microphone housing. Insert a size 9V battery following the indicated

correct polarity. Screw on the microphone housing.

2. Insert 2 1.5V batteries following the indicated correct polarity into the receiver. Set the

receiver power switch to the ON position.

3. Insert the 6.35mm end of the receiver output jack (9) into the socket of your amplifier.

4. The unit is ready for use as a wireless microphone.

Wireless Receiver

VHF Handheld
Wireless MIC

PRECAUTIONS:

1. If acoustic quality and volume are abnormal or receiving distance shortens, the batteries in

the transmitter and/or receiver need to be replaced.

2. In order to extend battery life and prevent leaks it is recommended that the batteries be

removed from the MIC and receiver prior to long term storage.

3. If the microphone, is too close to the audio output speakers or the volume of the amplifier is

too high, feedback may occur and may damage the speaker or amplifier. In this case, please

keep the microphone in an appropriate distance from the speaker or have the volume of the

amplifier turned down to a safe level to avoid feedback.

Technical Specifications:

Carrier Frequency: 185.15, 186.25

Frequency Stability: +0.008%

Dynamic Range: >80dB

Total Harmonic Distortion: <0.5%

Modulate mode: FM

S/N Ratio: ≥80dB

Frequency response: 50Hz-15kHz±3kHz

Receiver Power Supply: 1.5V AA battery

Working range: 20-30M

1 YEAR LIMITED WARRANTY

If, within 12 months of purchase, this device or any part included is proven to be defective by

reason of faulty workmanship or defects in materials, we will, at our option, repair or replace

with the same, free of charge of labor or materials on condition that the original invoice or

sales receipt with the date of purchase, or stamp from the dealer, is presented together with

the defective unit.

This warranty does not cover product failures due to losses or damages caused by misuse,

accidents, abuse, neglect, normal wear and tear, negligence (other than Seller's), unauthorized

modification or alteration, use beyond rated capacity, other accessories or peripheral devices

that are not intended for use with the product, unsuitable power sources or environmental

conditions, cosmetic damages, improper installation and/or repairs by any person not

authorized by the manufacturer.

Any defective unit or part shall become property of the manufacturer, should repairs or

replacement need to be made.

Specifications indicated herein may be subject to change without prior notice.