Page 1
www.pure-acouscs.com
SBW-210
Super Slim Bluetooth Surround Bar
& Wireless Subwoofer
User manual
&
Safety Guide
Page 2
www.pure-acoustics.com
Thank you for choosing Pure Acoustics. We hope you enjoy each and every use of this
product. We suggest that you read this user manual carefully before primary use in order
to utilize all of the features in functions installed. Please store it in a safe place for future
reference and pass it on to the next owner.
Caution & Safety Guide:
Please power off the unit when not in use. If the unit will not be in use for extended periods
it is suggested that you disconnect the unit from its power source.
To prevent damage to the unit do not install in areas of extreme heat or in areas with direct
exposure to sunlight.
Don’t install the unit in or near a place where it may come in contact with rain, moisture or
other liquids.
Install the unit on a horizontal, flat and firm surface with good ventilation. Never block the
speaker, blocking these vents may cause damage to the speaker as a result of
overheating.
To clean the unit, simply wipe it down using a dry, soft cloth. The unit should never be
cleaned chemicals or detergent.
In the rear occurrence of malfunction do not attempt to repair the unit on your own.
Contact a certified service professional for a proper diagnosis and repair.
Caution: Dismantling the unit on your own is dangerous and may cause damage to your
person or property and will void the warranty.
The lighting flash is intended to alert the user to the presence of dangerous
voltage within the product’s enclosure and touching the internal components may result in
electric shock to your person.
The exclamatory mark is intended to alert the user to the presence of
important operating instructions.
To reduce the risk of electric shock or fire, do not remove the cabinet cover
simply contact a service professional.
1
Page 3
Features:
Bluetooth - stream and enjoy music wirelessly from any Bluetooth enabled
device
2.1Ch Surround Sound Bar - full range cinematic sound that will fill the room
with rich bass and real life sound effects
Wireless Subwoofer - simple one step wireless connection is as simple as
powering it up. This ergonomically designed slim line wireless subwoofer will
deliver deep wide bass and life like sound effects that will amaze gamers on
every level.
Optical Input - Direct optical connection for enhanced sound effects and over
all audio reproduction for gamers, action movies and more…
Easy Setup - simple do it yourself plug and play connection will have you all
setup in minutes.
IR Remote Control –Full control over all modes features via IR remote control.
Main Chart of Panel
Top Panel:
1.Auxiliary Input
2.USB Port
3.Micro SD Port
4.Power Supply
5.Mode
6.Volume-
7.Volume+
SUBWOOFER OUTPUT
1.DC Input
2.
Coaxial Audio Input
3.
Optical Input
Front Panel:
www.pure-acoustics.com
2
Page 4
Connections
LINE IN
This unit has an extra group of audio input terminals You can input the analogue stereo
audio signals from extra devices such as VCD, CD, VCR, MP3 player, etc…
Use the provided RCA audio cable (red for right, white for left) to connect the stereo audio
output terminals of a VCD,CD,VCR player to the stereo input terminals LINE IN of this
unit.
Its corresponding signal source is LINE IN which can be available by pressing
(FUNCTION) on the top panel or pressing (AUX) on the remote control.
Subwoofer Output
Power on the subwoofer, the subwoofer is equipped with a wireless transmitter, the
manufactured default setting is set to automatically connect to the surround bar, should a
disconnect between the subwoofer and surround bar occur simply reset the connection by
pushing the reset button on the back panel of the subwoofer.
Bluetooth Connection
To pair the SBW-210 with your Smartphone or other Bluetooth enabled device hit mode to
enter Bluetooth mode. Enable the Bluetooth function on your Smartphone or other
bluetooth enabled device and hit scan for Pure SBW-210. When found choose it from the
list.
If prompted to input a password insert 0000, once successfully paired choose the
Pure-SBW-216 from the list of paired devices in order to connect.
Coaxial Digital Audio
Use a coaxial cable to connect the coaxial input of this unit to the coaxial output of a
power amplifier.
Optical Input
Use the optional optical cable to connect the optical output of your television or amplifier to
the player.
USB/Micro SD Card
USB/Micro SD CARD maximum 32GB. Please note this unit will only read WMA/MP3
Audio files.
www.pure-acoustics.com
3
Page 5
Remote Control
Remote Control Operation
Install the batteries into the remote control. Point the remote control at the remote sensor
on the front panel. The remote control works within a distance of about 8 meters from the
sensor and within an angle of about 30 degrees from the left and right side.
Battery Installation
1.Remove the battery 2. Load two AAA.1.5V batteries 3. Replacement
compartment cover on into the battery compartment making
the back of the remote sure that the batteries have been inserted
control with correct polarities +/- indicated inside.
NOTE:
Remove the batteries when you don’t intend to use the remote control for a long time.
Do not mix new and used batteries, or different types of batteries.
Weak batteries can leak and severely damage the remote control.
Be environmentally friendly and dispose of batteries according to your government
regulations.
Remote Control
1. Equalizer
2. Standby
3. Volume+
4. Previous
5. USB
6. Bluetooth
7. Optical
8. Micro SD
9. Audio Input
10. Return
11. 3D
12. Next
13. Volume-
14. Mute
15. Play/Pause
16. Coaxial
17. Stop
18. Repeat
19. Display
www.pure-acoustics.com
4
Page 6
Trouble Shooting
Prior to contacting service professional we suggest trying the following troubleshooting
procedures:
Issue
Possible Causes
Solution
No power
The unit is not connected to
the power supply or the
power cable is not properly
connected to the outlet.
Make sure the unit is connected to the
power supply. Try connecting the
cable to a different outlet.
No sound or distorted sound
1.The audio cables aren’t
properly connected.
2.The volume is set to the
minimum level.
3.The sound is switched off
1.Confirm that the audio cables are
connected properly in the correct
inputs.
2.Turn up the Volume
3.Press MUTE on the remote control
to switch on the sound.
4.Press Play/Pause
The buttons on the unit are
not working.
The unit is being interfered
with static electricity etc.
Switch off and unplug the unit.
Then connect the plug to the power
supply and switch on again.
The IR remote control is not
functioning properly.
1.Check to make sure that
there are batteries inside
and that they installed
properly.
2.The batteries installed are
depleted and in need of
replacement.
3.The remote sensor is
obstructed or the remote
control is not pointed to the
remote sensor
4.The remote control is out
of its operating range.
5.The unit is powered off
1.Install 2 AAA/1.5V batteries in it.
2.Replace the batteries with new
ones.
3.Remove any obstructions and make
sure that the remote control is pointed
at the remote control sensor.
4.Make sure the remote control is
within the operating range
5.Switch off the unit and disconnect it
from the AC outlet. Then power the
unit on again.
Technical Specifications:
Power Supply
DC 17V / 2A
Power consumption
80W
Working environment(Temperature)
-10~+35C
Relative Humidity
5%~90%
Power output(Max)
15W*2 + 50W
Frequency response
+/- 3dB (40Hz~20KHz)
www.pure-acoustics.com
5
Page 7
In the Box
User manual Remote control Wall Mount Audio Line cable
Once again we thank you for purchasing the SBW-210 sound bar and wireless subwoofer
system. It is our hope that you enjoy this product every time it is put to use therefore, we
suggest that you keep this user manual safe for future reference and so it may be passed on
to the next owner.
Please feel free to visit our website www.pure-acoustics.com for information on this product
as well as hundreds more
Enjoy!
www.pure-acoustics.com
6
Page 8
Loading...