Pure Acoustics PQ-2208, PQ-2210 User Manual

PQ-2208 & PQ-2210

Speaker Box with Amplifier

with MP3 player

User’s Manual

Before using your new Speaker Box with amplifier, please read this instruction
manual to prevent any damage. Put it away in a safe place for future references.

INSTRUCTIONS

Before connecting the speaker, make sure the system is off and
the controls on the minimum level. On the contrary the system
Could damage

1.- Plug the polarized cable to electric power and to the speaker

2.- Plug the Microphone on the “MIC” input with a 6.3 connector

3.- Plug an auxiliary system (CD, DECK, MP3, DVD, etc) on
“LINE IN” input

4.- Turn on the systems. A green LED light up on the speaker to
indicate it is on

5.- Set the volume on the middle level on the MIC and LINE IN input

6.- Increase little by little the line level volume

7.- Set TREBLE and BASS controls to equalize the sound.

8.- A red LED light up when the system detects overload power.
You must decrease the volume.

Caution

Do not close the microphone to the speaker, it can cause
feedback echo and it damage the system

EXTRA FUNCTIONS

Cannon connectors mark as LINE OUT can handle an

amplifier or even another PQ, in cascade.
On the bottom of the speaker there is a hole to place a stand.

FEATURES

 Polarized input to plug the power supply.
 6.3mm input for the microphone
 Two inputs: RCA and Cannon like auxiliary.
 Cannon output.
 LEDS to indicate power on (green) and overload power (red)
 On and off switch
 Microphone volume control

* Auxiliary volume control
* Line level volume control
* Tone control
* Protective fuse
* Supply power cable included
* To stand in horizontal or vertical position