Pure Acoustics PMW 1212, PMW 1215 User Manual

PMW 1212

User’s Manual

Before using your new Speaker Box with amplifier, please read this
instruction manual to prevent any damage. Put it away in a safe
place for future references.

INSTRUCTIONS

Before connecting the speaker, make sure the system is off and
the controls on the minimum level. On the contrary the system
Could damage

1.- Plug the polarized cable to electric power and to the speaker

2.- Plug the Microphone on the “MIC” input with a 6.3 connector
Or Canon

3.- Plug an auxiliary system (CD, DECK, MP3, DVD, etc) on
“LINE IN” input

4.- Turn on the systems. A blue LED light up on the speaker to
indicate it is on

5.- Set the volume on the middle level on the MIC and LINE IN input

6.- Increase little by little the master volume (place on the right side
Of LINE OUT* connector)

7.- Set TREBLE and BASS controls to equalize the sound.

8.- A red LED light up when the system detects overload power.
You must decrease the volume.

9. With MP3 USB input