Pure Acoustics DREAM MANO Owner's Manual

Introduction

Thank you for purchasing Pure Acoustics’ products, and welcome to the Pure Acoustics family of satisfied customers!

Pure Acoustics was established to fulfill the need for high quality speakers of exceptional design at an affordable price. After
years of research and development, and by manufacturing all parts ourselves -- from the voice-coil to the uniquely-designed
crossover -- Pure Acoustics is able to offer you speakers of superior value.

Each speaker component has been designed and engineered with first-rate materials to produce exceptional sound. Our
speakers offer the best of it all – high-quality sound, hand-made solid construction, and a remarkably stylish appearance.

We welcome you to witness the results. Our team’s dedication to quality, reliability and attractive design has created some of
the best-value speakers you can find today.

Reading the complete manual will help you to set up your speakers properly and reward you with a fine listening experience.
Pure Acoustics distribution centers in Europe, Asia, Australia and the Americas will be happy to assist you with any questions you
may have. Please look for the distributor nearest you on our website, www.pure-acoustics.com.

Connections

Carefully unpack the loudspeakers and retain the carton and packing materials for future use. Please ensure that all system
components are turned off prior to making any connections. Make sure that your amplifier speaker’s definition is set to SMALL
and the subwoofer definition is YES. Turn all equipment off. When connecting the speakers, be sure to retain the correct
polarity. Most speaker cables will have (+) red sign for positive and (-) black sign for negative.

Front speakers: Connect the speaker cable to the positive (+) front-left speaker terminal on the amplifier and to the positive (+)
terminal on the front-left speaker. Connect the speaker cable to the negative (-) front-left speaker terminal on the amplifier and
to the negative (-) terminal on the front left speaker. Repeat the same step for the right-side front speaker. This method can
be applied to bi-wire terminals as long as the shorting straps are in place. If your amplifier is equipped with bi-wire output
connection, remove the shorting straps and connect each terminal to the associated terminal in your amplifier.

Center speaker: Connect the speaker cable to the positive (+) center speaker terminal on the amplifier and to the positive (+)
terminal on the center speaker. Connect the speaker cable to the negative (-) center speaker terminal on the amp and to the
negative (-) terminal on the center speaker.

Rear speakers: Connect the speaker cable to the positive (+) rear left speaker terminal on the amplifier and to the positive (+)
terminal on the rear-left speaker. Connect the speaker cable to the negative (-) rear-left speaker terminal on the amplifier and
to the negative (-) terminal on the rear-left speaker. Repeat the same step for the right-side rear speaker.

Subwoofer hi-level connections: Connect a speaker wire from the amplifier left speaker terminal to your subwoofer's left input
terminal. Connect another speaker wire from the amplifier’s right speaker terminal to your subwoofer’s right input terminal.
Connect the speaker cable to the positive (+) output-left speaker terminal on the subwoofer and to the positive (+) terminal on
the front-left speaker. Connect the speaker cable to the negative (-) output-left speaker terminal on the subwoofer and to the
negative (-) terminal on the front left speaker. Repeat the same step for the right-side front speaker.

Subwoofer low-level connections: Connect a single RCA to RCA cable between the subwoofer input terminal and your amplifier’s
subwoofer output terminal. Make sure the subwoofer switch is in the OFF position, rotate the GAIN control to MIN and set the
FREQ control to the middle position. Plug in the AC power cord to your electrical outlet. Turn on your amplifier and
subwoofer and play your favorite music. Gradually increase your amplifier’s volume to your desired level. Gradually increase
your subwoofer GAIN level to your desired bass level. Adjust the FREQ control to a point where the subwoofer and rear
speakers perform to your satisfaction. Toggle the PHASE switch between the REV and NOR positions to see which one sounds
better to you. These adjustments are used to match the subwoofer bass reproduction with that of your main speakers. You
can now leave the AUTO/ON/OFF switch in the AUTO position. This position is voice-activated; your subwoofer will switch on