Purdy ANDpSi121GAOS-HB User Manual
)
°
°
Displays
ANDpSi121GAOS-HB-KIT
12.1” XGA Color p-Si TFT
LCD Module
The ANDpS121GAOS-HB-KIT is 1024 x 768 Color TFT display
that utilizes new poly-silicon (p-Si) technology to provide a
brighter, thinner and lighter display with high-resolution. The p-Si
TFT technology allows the row and column LCD drivers to be
fabricated directly on the LCD glass. This eliminates the need for
discrete TAB drivers and also reduces the thickness, weight and
overall size of the display.
applications in such areas as electronics books and personal
digital-picture viewers.
The 12.1” XGA resolution expands
Features
• High Luminance
• Built-in Long Life Lamps (MTTF: 50,000 h)
• Replaceable structure of lamp units
• Analog scaling board attachable to LCD backward
• Recommendable inverter attachable to LCD backward
• XGA (1024 x 768 pixels color display)
• Reverse Scan function
• Applications: electronic books and personal digital-picture
viewers
Mechanical Characteristics
Item
Outline
Dimensions
Number of
Pixels
Active Area 245.8 (H) x 184.3 (V) mm
Viewing Area 247.8 (H) x 186.3 (V)
Pixel Pitch 0.24 (H) x 0.24 (V) mm
Weight (approx.) 685 gram
Backlight Twin CCFL, Sidelight type –
278.3 (H) x 209.0 (V) x 12.0 max (D) mm
Absolute Maximum Ratings
Item
Supply Voltage
FL Driving Frequency
Input Signal Voltage
Operating Ambient Temp.
Operating Temp. for Panel 0 60 °C
Storage Temperature
Storage Humidity
(Max. Wet bulb temp = 39°C)
Specification Unit
1024 (H) x 768 (V) pixels
Symbol Min. Max. Unit
V
T
-0.3 4.0 V
DD
V
f
FL
V
T
– 10 90 %(RH)
0 2.0 kV(rms)
FL
(0) (100) kHz
-0.3
IN
050 °C
op
-20 60 °C
stg
+
V
DD
0.3
V
Electrical Characteristics (Ta = 25°C)
Item
Supply Voltage
=6.0mA(rms)
I
FL
FL Start Voltage
(Ta = 0°C)
Differential Input
Voltage
Common Mode
Input Voltage
Current
Consumption
Pwr Consumption
I
=6.0mA(rms)
FL
*: 8 color bars pattern
**: Except the efficiency of FL inverter
Symbol Min. Typ. Max. Unit
V
V
V
V
I
DD *
I
FL **
3.0 3.3 3.6 V
DD
TBD (580) TBD V(rms)
FL
– 1400 – – V(rms)
100 _ 600 mV
ID
1.0 –
CM
– (220) TBD mA
3.0 – 6.0 mA(rms)
P – (7.7) – W
(V
2.4-
ID
)/2
Optical Characteristics (Ta = 25°C)
Item
Contrast Ratio CR 100 250 – –
Viewing
Angle
(CR ≥ 10)
Response
Time
Luminance
I
=6.0mA(rms)
FL
Lamp Life Time
(Notes 1,2)
Note 1: Conditions: Ta = 25°C, I
Note 2: Definitions of failure:
a) LCD luminance becomes half of the minimum value.
b) Lamp doesn’t light normally.
(Upper+Lower) TBD 100 –
(Left+Right) TBD 120 –
)t
(t
ON
(t
OFF
Sym. Min. Typ. Max. Unit
– – 50 ms
on
t
– – 50 ms
off
L (280) (350) –
MTBF 50,000
=6.0mA(rms), continuous lighting
FL
cd/m
Product specifications contained herein may be changed
without prior notice. It is therefore advisable to contact
Purdy Electronics before proceeding with the design of
equipment incorporating this product.
V
2
h
7/27/07
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8216 • Fax: 408.733.1287 • sales@purdyelectronics.com
www.purdyelectronics.com
1
Displays
Dimensional Outline
Front View
ANDpSi121GA0S-HB-KIT
Unit: mm
Standard Tolerance: 0.5mm
2
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8216 • Fax: 408.733.1287 • sales@purdyelectronics.com
www.purdyelectronics.com
7/27/07
Loading...