Pultronics PUL TRA43401 User Manual

Applicant: Pultronics Inc.

Product: Tag Reader
Model: TR-434A
FCC ID: RSVPUL-TRA43401

Installation and Operation Manual

Prepared by:

PULTRONICS INC.
5375 rue Paré, suite 200

Montréal, QC
H4P 1P7
CANADA
Tel.: [phone]
Fax : [phone]

www.pultronics.com

z Page 2

Installation and Operation Manual

Tag Reader, model TR-434A

System Architecture, Asset Management and Data Acquisition Integrated Via Internet

The Tag Reader is a part of a real time tracking system, ideal for real-time tracking of assets, as well as
for data collection from remote sensors. It features a remote real-time update of system databases
through the Internet. This comprehensive 3-part system consists of active tags e.g. Sensor TagA
devices, Tag Readers model TR-434A and software tools. The system provides the acquisition of
parameters such as vibration, motion and temperature.

This system is fully automated and continually monitors data from the sensor tags. It utilizes miniature
battery-operated radio tags, and a cellular system to detect the presence and location of the tags. The
locating system is deployed as a modular matrix of Tag Readers installed at strategic locations and
providing full coverage of the surveyed area.

Tag Readers continually update the central database with current sensor tag data. The update is as
frequent as every few seconds. In typical applications system can simultaneously track millions of tags
with a database update not exceedi ng few secon ds.

The system takes a full advantage of communication means provided by the LAN and access to the
Internet. It makes possible to streamline large amount of captured data both within the LAN and to an
outside location accessible through the Internet. Internet connectivity enable users to achieve high­speed control and acquisition of data from anywhere in the world. It makes data accessible from world­wide locations. Low cost and universality of the Internet makes it a best suited medium to
accommodate such demands.

Tag Reader

The Tag Reader is an Ethernet based rad io freque ncy transceiver. Its basic function is to receive da ta
from the sensor tags and transmit this data through the Internet to a server.

It is powered from Power Over Ethernet (POE) adapter. The Power Over Ethernet (POE) adapter
is easy to install. It's Plug n Play and requires no tools or software. The Tag Reader terminal unit
powered using POE can be mounted virtually anywhere in a building without worrying about the
location of a power supply. A typical deployment of Tag Reader devices is depicted in Figure 1.