Pulse ZX200, SPA300, SPA900, SPA600, CPA500 User Instructions
User Instructions
PULSE ZX200
Power Amplifier
www.pulse-audio.co.uk
SAVE THESE INSTRUCTIONS!!
Unpacking and Inspection
Unpacking and Inspection Unpacking and Inspection
Unpacking and Inspection
Carefully unpack the unit. If it appears damaged in any way, return it to the retailer it was purchased
from in its original packaging. PULSE cannot accept any responsibility for damage arising from the use
of non approved packaging.
INTRODUCTION
INTRODUCTION INTRODUCTION
INTRODUCTION
The PULSE ZX series of amplifiers are rack mount professional power amps, designed to provide high
quality, reliable performance for all professional applications from live bands to club installations.
MAIN FEATURES
MAIN FEATURES MAIN FEATURES
MAIN FEATURES
2 Channel stereo power amplifier, fan cooled and featuring, softstart and short circuit/thermal
protection. 19" rack mountable, supplied complete with removable rubber feet for desktop use.
•
200W RMS power output
•
Detented rotary volume controls
•
Protection, clip, signal & power LED indicators
•
Short circuit and thermal protection
•
Ground/Lift switch
•
Rugged steel enclosures with front & rear rack mount ears
•
Signal Inputs: 2x unbalanced 6.35mm (1/4”) jack & 2x phono sockets
•
Speaker Outputs: 2x Speakon, 2x 6.35mm (1/4”) jack & 2 pair binding posts
INSTALLATION GUIDELINES
INSTALLATION GUIDELINES INSTALLATION GUIDELINES
INSTALLATION GUIDELINES
•
Do not use these amplifiers in damp or high humidity environments. Do not use outdoors or
anywhere where liquids could fall or splash onto the amplifier.
•
Ensure the amp is adequately ventilated, with free airflow to the front and rear panels. Keep
away from other heat sources. If the amps are mounted in a rack with other amps, ensure
there is adequate cool air flow front and rear. Note that air is drawn in through the back
panel, and exhausted through the front panel.
•
NEVER cover the amplifiers, as they may overheat.
•
PULSE power amplifiers are designed to fit standard 19” racks, with a 2U height and 17”
depth. We recommend the use of rear rack supports, especially if the rack is to be mobile.
Use shakeproof washers or threadlock adhesive to prevent mounting bolts becoming loose
in transit.
•
Ensure that the AC power supply is correct for your amplifier. The required AC supply is
stated on the rear panel next to the AC power input.
•
Ensure that you use the correct type of mains lead for your equipment and country. This
must be free from damage and easily accessible during use.
•
Keep away from magnetic recording media (tape, mini disc, hard drive etc). Power
amplifiers produce an electromagnetic field, which could affect stored files.
Wiring Conventions in P
Wiring Conventions in PWiring Conventions in P
Wiring Conventions in PULSE Power Amplifiers
ULSE Power AmplifiersULSE Power Amplifiers
ULSE Power Amplifiers
Phono/RCA (unbalanced);
Phono/RCA (unbalanced);Phono/RCA (unbalanced);
Phono/RCA (unbalanced);
Tip=Signal Positive. Sleeve=Signal Ground.
6.35mm
6.35mm 6.35mm
6.35mm (1/4”) Jack (unbalanced);
(1/4”) Jack (unbalanced);(1/4”) Jack (unbalanced);
(1/4”) Jack (unbalanced);
Tip=Signal Positive. Sleeve=Signal Ground.
Speakon ;
Speakon ;Speakon ;
Speakon ;
1+=Speaker Positive. 1-=Speaker Negative.
Loading...