Pulsar ANALOGUE, Y621 Instructions Manual

ENGLISH

ANALOGUE WATCHES

■SCREW DOWN CROWN [for models with screw down crown]

1 Turn Crown counterclockwise until you no

longer feel the threads turning.

2 Crown can be pulled out.

Unlocking the crown

1 Push Crown back in to normal position.
2 Turn Crown clockwise while pressing it lightly

until tight.

Locking the crown

* When using the watch in water:

Before using the watch in water, be sure the crown is screwed in completely.
Do not operate the crown when the watch is wet or in water.

English

2

■HOW TO START THE MECHANICAL WATCH (Cal. Y621)

CROWN

1 Pull out to the first click.

■TIME/CALENDAR SETTING FOR MODELS WITH DATE CALENDAR

To initially start your watch, swing it from side to side in a horizontal arc for
about 30 seconds.

* If the watch is worn daily, PULSAR’s automatic mechanism will wind the mainspring

automatically through normal wrist movement.

■TIME SETTING FOR MODELS WITHOUT CALENDAR

CROWN

1 Pull out.
2 Turn to set the time.

3 Push back.

English

3

2 Turn to show the previous day’s date.
3 Pull out to the second click.
4 Turn until the desired date appears.

* Turn Crown to advance Hour and Minute

hands.

5 Turn to set the time.
6 Push back in to normal position.

10

■TIME/CALENDAR SETTING FOR MODELS WITH DAY AND DATE CALENDAR

CROWN

1 Pull out to the first click.
2 Turn to show the previous day’s date.
3 Turn in the opposite direction to show

the previous day of the week.

4 Pull out to the second click.
5 Turn until the desired date and day

appears.

WED

8