Page 1
Page 2
6 Airflow Holes
Convection Metal
Heating Chamber
Food-safe
Mouthpiece
LED Display
LED Light
Battery Button On/Off
Temperature Control
Keys +/-
Micro USB Charging
Features:
Variable Temperature settings for Personalized Vaping
Long Lasting & powerful 2200mAh Battery
Quick Fill, Set & Vape Operation
Pulsar® Vibe Manual
Thank you for purchasing the Pulsar® Vibe! In order to ensure
safe use, please read all instructions and safety warnings before
operating. Failure to follow instructions may result in injury and may
void your warranty.
1 2
Page 3
Important Friendly User Tips:
• For best results, fill chamber halfway or more, but do not pack
tightly, this allows for even heat distribution and room to stir your
herbal blends if necessary throughout usage.
• Once the vaporizer reaches desired temperature, allow 30 seconds
before using. This ensures the herbs in the chamber are evenly
heated, maximizing efficiency.
• Always allow unit to reheat for 5 seconds between each inhale.
• To maximize efficiency, after using allow unit to cool, and then stir
herbs before the next cycle.
Be sure to turn off the unit when you are done by Clicking the on/
off button 5 times withing a few seconds. This will ensure the unit is
“Locked” & will not heat until you turn it on again.
Kit Contents
• 1 Pulsar® Vibe Vaporizer
• 1 Cleaning brush
• 1 Packing tool
• 1 User Manual
• 1 USB Cable
• 1 Wall Charger
3 4
Page 4
Tech Specs
Micro USB Charging Port
LED Digital Screen Battery Life and Heat Setting Indicator
Battery Charge Time: 1 - 3 Hours
Precision Temp Setting range: 350°F – 430°F
5-Click On/Off & Locking Function
Temperature Setting Memory
5-Minute Auto Shut off
Measurement size: 5”x1”x1”
Capacity & Output: 1pcs 2200mAh Li-polymer Batteries/4V
Continuous working time: 60 min (upon full charge)
Battery Low Indication: Blue flashing light – 20 times before shutdown
Convection Metal Heating chamber
Food-safe Acrylic Mouthpiece
Charging Instructions: IMPORTANT: You will need to fully
charge your Pulsar
®
Vibe before using it.
Insert charger plug into unit & the other end into a dedicated USB
port or wall socket if using AC wall adapter (included!). Set Pulsar
®
Vibe on its side – do not let unit dangle from charge cord. This puts
pressure on the charger plug that can result in the unit not charging
fully. The initial charge time can take up to 4 hours. Additional
charges should take approximately 3 hours each. Please note:
LED will flash slowly while charging & will turn solid when unit is fully
charged.
5 6
Page 5
Low battery indication: When battery requires charging, display
screen will show indicator as empty, the blue light will flash 20
times and turn off. You will not be able to run a cycle until you fully
recharge the unit.
AC Wall Adapter: Use ONLY Pulsar
®
brand AC Wall Adapters! Failure
to follow warnings contained within this manual can result in property
damage or personal injury, and will void the warranty.
The Pulsar
®
Vibe battery will deliver approximately 1 hour of
continuous power, depending on use. The battery indicator shows
continuously and will blink & the unit will turn off when charging is
needed. Both the battery and chargers are designed to prevent
overcharging. ONLY USE APPROVED PULSAR
®
CHARGERS! Failure
to do so can damage the battery, which can result in property
damage or personal injury and will void the warranty.
Using Pulsar® Vibe
1. Push the mouthpiece from the back side of the mouthpiece
towards the front.
2. Fill heating chamber with finely ground herbs or loose tobacco.
For best results: Do not overfill or pack herbs too tightly.
3. Replace mouthpiece securely.
7 8
Page 6
9 10
Heat Settings
The Pulsar® Vibe has a temperature range of 350°F-430°F. To change
heat setting during use, use temperature buttons to select desired
temperature. Allow the Pulsar Vibe to adjust the temperature, and
then continue vaping.
IMPORTANT Tips: Your Pulsar
®
Vibe is equipped with a 5-minute autoshutoff timer to prevent waste and overheating, always allow unit to
cool 5 minutes between cycles whenever possible, but you may turn
the unit back on immediately to finish any herbal blends left in the
chamber. Occasionally stir herbs and allow chamber to reheat for 5
seconds between each inhale.
4. Press function button 5 times to turn on the screen. This unit will
automatically begin heating to the last used temperature.
You can adjust the temperature setting at any time during
use. The range of the Pulsar
®
Vibe is 350°F – to 430°F.
5. Using the arrow keys adjust the temp to the degree of
preference. Pulsar
®
Vibe will remember your last setting
(Factory setting will be 350°F). The screen will show the
word “heat” while the power button flashes. Once the
temperature setting is met the light will stop flashing &
become solid and the screen will read “warm”.
6. Once the desired temperature is reached, you may want
to give the unit another 30 seconds and then take a long,
slow draw and enjoy your vape!
7. To manually shut off your Pulsar
®
Vibe push the On/Off
function button 5 times within 3 seconds; otherwise the unit
will turn off after 5 minutes.
Page 7
Cleaning Instructions
Always clean the unit after each use to avoid excessive build up,
which will interfere with the function of your Pulsar® Vibe Vaporizer
and can affect your warranty status.
1. Remove the mouthpiece.
2. Remove the screen housing, use the brush to gently push the
screen out & clean or replace.
3. Dump the contents out & tap gently on your hand to make sure all
particles are removed
4. Using the same brush; push into the chamber and twist gently to
remove any residue from the walls of the chamber
5. Replace the mouthpiece
6. Your Pulsar
®
Vibe is ready for storage or use!
IMPORTANT TIP: Do not use cleaning solutions, solvents, or other
chemicals when cleaning your Pulsar
®
Vibe. Doing so can result in
undesired tastes or smells and can cause potential health hazards.
11 12
Page 8
Important Safety Warnings
Do not expose to extreme temperature or direct sunlight.
Do not drop the Pulsar Vibe or accessories.
Do not drop or submerge in any liquid.
Do not modify the electronics in any way.
Allow the full 5-minute cool down between cycles whenever possible.
Only charge using Pulsar
®
brand chargers.
Pulsar
®
Vibe is intended for adults only. Do not sell or provide to
minors. Keep all parts, concentrates, herbs, and liquids away
from children and pets. Pulsar
®
Vibe is not a medical device and
is not intended to diagnose, treat, mitigate, cure, or prevent any
ailment, disease, or other conditions. Consult a physician before
use, especially if you suffer from heart disease or any other medical
condition, or if you are pregnant or breastfeeding. Failure to follow
any of these instructions could result in product damage, property
damage, or personal injury.
Limited Warranty
Pulsar® Vibe is guaranteed from manufacturer defects or malfunction
from the original date of purchase for a period of 12 months. This limited
warranty protects against manufacturer defects under normal use
and does not apply to normal wear & tear; improper use; accidental
damage from dropping or submerging in liquid; improper cleaning;
neglect; or any other damage that is not a result of defective materials
or workmanship. If your Pulsar
®
Vibe qualifies for servicing, we will repair or
replace, at our discretion and expense, any defective parts or materials.
Purchaser must provide a copy of the original dated sales receipt
and may be required to provide shipping to return defective parts or
materials. We intend to complete all repairs/replacements within 7
business days, although this timeframe may vary depending on shipping,
replacement part availability, or other related factors. The lawful and
proper use of this device is a condition of sale. Any improper use of the
Pulsar
®
Vibe will void the warranty. Warranty is non-transferable. This
warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state.
For warranty servicing, contact us at:
www.PulsarVaporizers.com
13
14
Loading...