Pulsar Triad User Manual

Thank you for purchasing the Pulsar™ Triad! It has everything you
need to vaporize waxes, herbs, and e-liquids. In order to ensure
safe use, please read all instructions and safety warnings before
operating your Pulsar™ Triad. Failure to follow instructions may
result in injury and may void your warranty.

This Kit Includes:

Charging Instructions

You will need to charge your Triad before using it. Screw the
charger cable onto the top of the Triad battery, then to a
dedicated USB port. A red light on the charger will glow red while
charging. Total charge time is approximately 1-2 hours. The red
light will turn green once fully charged. The Triad battery will deliver
approximately 1-2 hours of continuous power, depending on use.
Batery light will blink repeatedly once battery is depleted and
charging is needed. Both the battery and charger are designed to
prevent overcharging. ONLY USE APPROVED PULSAR™ CHARGERS!
Failure to do so can damage the battery, which can result in
property damage or personal injury.

Using The Wax Atomizer

Remove the cover then, using the vape tool provided, load a
small dab of wax or concentrate into the heating chamber, being
careful to avoid touching or damaging the heating element with
the vape tool. Replace the cover, and you’re ready to vape!

Battery Vape Tool

1 2

USB Charger

Liquid

Atomizer

Herb

Atomizer

Wax

Atomizer