Pulsar Edge GS 1x20, Edge GS 2.7x50 Instruction Manual

SPECIFICATIONS
75095
75096
Type of image intensifier tube
Magnification, x
1
2.7
Objective lens, mm
20
50
Resolution in the centre FOV, lp/mm, min
42
42
Angular field of view, degree
40
13
Max. Detection range, m/yds*
100/109
250/273
Eyepiece adjustment, diopter
±4
±4
Exit pupil, mm
4
4
Eye relief, mm
12
12
Operating voltage, V
3 (2xAAA)
3 (2xAAA)
Tripod mount, inch
¼
¼
Av. operation time with 2 AAA batteries, (IR off/on), h 50 / 20
50 / 20
Operating temperature
Degree of protection, IP code
IP44
IP44
Dimensions, mm/inch:
Length
163 / 6.4
203 / 8
Width
113 / 4.4
122 / 4.8
Height
60 / 2.4
65 / 2.6
Weight of the unit, kg/oz
0.65 / 22.9
0.85 / 29.9
Weight of the head mount, kg/oz
0.2 / 7
-
Maximum distance at which the user can detect objects, and their details, being observed measuring
*
150 mm or more under the natural light of a quarter moon (0.05 lux) with no clouds or fog (outstretched human arm, head, etc. can be seen). The viewing distance increases as the size of the objects under observation and/or light intensity becomes greater.
PACKAGE CONTENTS
Edge GS 1x20 / Edge GS 2,7x50 unit
Head mount* Carrying case Two AAA batteries User manual Cleaning cloth Warranty card
* Deliv ered with Night Vision
Goggles GS 1x20 (#75095).
For improvement purposes, design of this product is subject to change.
-
+ -
2 3 5 6 7
+
4
1
OVERVIEW
At the core of the night vision binoculars Edge GS 1x20 (2.7x50) is the unique combination of specially designed R-Contact optics and the CF- Super Image Intensifier Tube, created specifically for each other such that they will not work with any other system. The result of this exclusive technological development is the highest edge-to-edge resolution performance ever seen in a budget consumer NV product.The binoculars are outfitted with new objective lenses that minimize distortion on the edges of the field of view and increase sharpness and contrast of the image. The soft rubber eyecups conceal the light emission from the tube thus permitting a user to stay unnoticed. The housing of metal and plastic ensures extra durability and reliability during usage. The Edge GS 1x20 (2.7x50) have a IP44 degree of protection (IEC 60529), i.e. these devices are protected against water and dust which expands the range of its usage. The binoculars are equipped with an IR illuminator necessary for normal observation in moonless cloudy conditions in total darkness. The Edge GS 1x20 is equipped with a 1/4'' socket which allows it to be fixed on the head mount (included for #75095). The binoculars are fully self-contained and can work up to 50 hours on twp AAA batteries at temperatures varying from -20 ºC to + 40 ºC.
Your Edge GS 1x20 (2.7x50) is ideal for professional and amateur use, including:
Night observation in natural environment Search and rescue
Night orienteering Repair and maintenance of equipment Hunting
PECULIARITIES OF USE
Your night vision binocular is designed to provide many years of reliable service.
To ensure high performance you should adhere to the following rules
Do not direct binocular in the on position at intense sources of light,
such as car's headlights or burning fire. This may disable the unit for an unknown length of time or cause a dark spot in the center of the field of view. Do not turn the unit on in daylight without the protective caps firmly secured over the objective lenses, as this may damage the unit.
Never leave the binocular in the on” position over an extended length of time in an area with a light level exceeding 1-10 lux (twilight - 10 lux, deep twilight - 1 lux). Please keep the protective caps on the objective lenses under greater light level. Your binocular was designed to be self-contained. Do not open the body of the unit or otherwise attempt to service this device. If such need arises return the binocular for replacement or repair. Protect the device from exposure to direct sunlight and extreme temperatures. Avoid dropping or otherwise shocking the binocular. The device incorporates a sophisticated optical system which could be damaged in extreme cases of misuse. Clean optical parts (lenses) with professional lens cleaning supplies designed for use with multicoated optics.
Damage to this device from failure to observe these warnings may void the
device's warranty!
BATTERY INSTALLATION
Your binocular runs on a two AAA batteries. To install them, turn the knob of the battery cover 90° counterclockwise, remove the cover and install two AA batteries as indicated. Close the cover and lock.
USE AND TESTING
Make sure the two AAА batteries have been installed according to the
instructions found in the battery installation section of this manual.
Enter a dark area before turning on the binocular. Remove the objective caps.
Activate the device by pushing the ON(2) button. The green LED
indicator (3) lights up. You can test your binocular in a light area without removing the protective caps. This will not damage your unit. If the subject to be viewed is in a completely dark area, including lowlight shadow areas; activate the infrared illuminator (4) by
pushing the “IRbutton (5). The LED indicator will change its color
from green to red. To adjust the IR power, rotate the controller (6).
Direct the turned on binocular at an object at a distance of around 10- 100 meters. Rotating the eyepieces (7), focus on the tube's screen - rough surface or tiny dark dots are visible. Rotate the objective lenses
(1) until the image quality is optimal. Re-focus the eyepieces, if necessary. After this adjustment you may not rotate the eyepieces irrespective of the distance and objective lenses.
Direct your binocular at an object to be viewed and adjust the final focus by rotating the objective lens focusing ring until the image is optimal. When screwing the objective lenses into the housing, it focuses on farther objects, when screwing out - on closer ones. The Edge 1x20 Goggles are intended for joint use with the head mount (included in the package of #75095). To do this, affix the binocular to the head mount by means of the screw of the adapter (see picture) and adjust the device as described above. Additional information on the operation of the head mount is enclosed with its user manual. When you are finished using your binocular place the caps back onto
the objective lenses and turn off the unit by pushing the ON (2)
button, the LED indicator will go out. Put the binocular into the carrying case.
CAUTION!
Your binocular can be used in extreme cold. However, when the unit is brought back into a warm environment, you must wait approximately 2-3 hours before using the unit again. Failure to do so may result in damage as a result of condensation accumulating on the internal circuitry of the unit.
MAINTENANCE
Clean the lens with professional lens cleaning supplies intended for use with multicoated optics. Blow any dust or dirt off the lenses using dry, compressed air. Clean the unit housing with a soft, clean cloth.
STORAGE
During long-time storage please remove the batteries to prevent possible leakage. The battery cover must be fully screwed during long-time storage.
TROUBLESHOOTING
The scope will not turn on.
Check that the batteries are installed properly. Install the batteries according to the (+) and (-) polarity, ensuring that the markings on the battery and battery compartment correspond with one another. Check the battery contacts to ensure they are clean and free of corrosion; if necessary, clean the contacts with rubbing alcohol. Also check that the cap of the battery department is fully closed, otherwise the device will not operate. If necessary, replace the batteries as they may be depleted. Also be sure that the ON button has been pushed and the green LED is on.
Distinct black dots appear on the screen.
These dots are cosmetic blemishes resulting from tube production processes and do not interfere with the reliability or performance of the scope and are not a defect.
The image snows”.
Image may “snow in a dark environment during 30-60 seconds after the device is activated; this effect disappears soon. Image may slightly
“snowif the device was previously operated without the lens caps at a
high level of luminance. Image may also “snow if the device is operated in complete darkness with the IR illuminator off.
The image is not focused.
Adjust the focus of the eyepieces and the objectives (see “Use and Testingsection). Check that the lenses are not foggy or dusty; if they are,
carefully clean the external surfaces of lenses with a soft cotton fabric. Replace the batteries if the total battery charge is less than 2.2V.
When the unit is brought into a warm environment from a cold one, condensation may appear on the internal lenses; you must wait two hours before using the unit.
Visibility decreases or disappears.
Bright light sources, such as headlights, may cause visibility to decrease or disappear and the image to flicker. Turn the power off and turn the binocular away from the light source; visibility will restore itself immediately.
Loading...