PULS ZM1.WALL Installation Manual [ml]

EN ZM1.WALL Installation Manual Wall/Panel Mount Bracket
DE ZM1.WALL Installationsanleitung Wandmontageadapter
FR ZM1.WALL Manuel d'installation Kit de montage mural
ES ZM1.WALL Manual de instalación Soporte de montaje en pared/panel

Doc. ID: PU-200.100.75-xxZ (2019-01-10-MR1)

Product Description

The ZM1.WALL is a mechanical accessory to mount a device on a flat surface or
panel without utilizing a DIN-rail.

The order number ZM1.WALL contains two brackets needed for one device.

Intended Use

This mechanical accessory is designed for DIN-rail devices. Check the product
datasheet of the DIN-rail device to confirm that it is suitable for the desired device.

Mechanical Dimensions

Technical Data

Size (width x height x depth)
Weight

Mounting Example

143x8x7mm
50g / 0.11lb

All dimension in mm

Headquarters: PULS GmbH, Elektrastr. 6, 81925 Munich, Germany, www.pulspower.com
Germany [phone]
China [phone]

France [phone]
North America [phone]

The information in this document is believed to be accurate and reliable and may change without notice.

Austria [phone]
Singapore [phone]

Switzerland [phone]
United Kingdom [phone]

ZM1.WALL Installation Manual

Installation Instructions

1) Detach the two aluminium brackets by removing the four screws with a Torx 10 screwdriver.

2) Remove the plastic lock mechanism by using a flat-blade screwdriver to move the lock downwards while at the same time push the plastic slider
upwards. Detach the plastic slider.

3) Mount the steel brackets with the same screws from the DIN-Rail brackets. Be careful not to over- tighten the screws! Recommended tightening
torque is 0.6Nm/ 5.3lb.in.

WARNING - Risk of electrical shock, fire, personal injury or death.
Do not use other screws than the one from the DIN-Rail bracket. The unit might become unsafe when using longer screws as contact with live
electrical circuits may occur.

Installation Instructions