PULS ZM1.UBC10 Installation Manual [ml]

EN ZM1.UBC10 Installation Manual Wall/Panel Mount Bracket
DE ZM1.UBC10 Installationsanleitung Wandmontageadapter
FR ZM1.UBC10 Manuel d'installation Kit de montage mural
ES ZM1.UBC10 Manual de instalación Soporte de montaje en pared/panel

Doc. ID: PU-200.100.87-xxZ (2019-01-10-MR1)

Product Description

The ZM1.UBC10 is a mechanical accessory to mount a device on a flat surface or
panel without utilizing a DIN-rail.

The order number ZM1.UBC10 contains one mounting bracket, four mounting screws
(M5x8) and four 5mm spring-lock washers.

Intended Use

This mechanical accessory is designed for DIN-rail devices. Check the product
datasheet of the DIN-rail device to confirm that it is suitable for the desired device.

Mechanical Dimensions

Technical Data

Size (width x height x depth)
Weight

Mounting Example

123x13x156mm
340g / 0.75lb

All dimension in mm

Headquarters: PULS GmbH, Elektrastr. 6, 81925 Munich, Germany, www.pulspower.com
Germany [phone]
China [phone]

France [phone]
North America [phone]

The information in this document is believed to be accurate and reliable and may change without notice.

Austria [phone]
Singapore [phone]

Switzerland [phone]
United Kingdom [phone]

ZM1.UBC10 Installation Manual

Installation Instructions

1) Put the unit backwards on a flat surface and remove the fuse before working on the unit.

2) Loosen the captive cover screw.

3) Open the battery compartment.

4) Remove the battery without disconnecting the connection wires.

5) Put the wall mount bracket behind the unit.

6) Screw the four screws and the four spring-lock washers, which were delivered with the mounting bracket, into the shown areas. Tightening
torque: 3 Nm (27 lb inch)

7) Return the battery into the housing, close the battery compartment and insert the fuse again.

Installation Instructions