Puls SL10.106 Data Sheet
48-56V adjustable, PFC
SL10.106
CB
scheme
IEC60950
UL508 LISTED
IND. CONT. EQ.
18 WM, 60°C
• Input: AC 230/115V, DC 240...375V
• Output: 48-56V/240W
• PULS Overload Design
™
:
Power boost up to 288W;
high overload current,
no switch-off
• Robust mechanics and EMC
Data sheet SilverLine
Input
Input voltage AC100-120/220-240V (switchable), 47-63 Hz
Note: At DC input, always leave the switch in the 230V position
Input current I
Inrush current I
Fuse loading I²t <2.5A²s (T
DCin at open output 8mA (preserves battery sources)
Unit is internally fused (fuse not accessible). For external fusing of unit
and for input line protection, use circuit breaker with B-characteristic
10A or slower action, or alternatively T10A HBC fuse.
Harmonic current
emissions (PFC)
Transient
handling
Hold up time >25ms at AC 196V, 48V/5A
Efficiency, Reliability etc.*
Efficiency >90% (AC 230V, 48V/5A)
Losses <26.7W (AC 230V, 48V/5A)
MTBF 425.000h acc. to Siemensnorm SN 29500
Life cycle (electrolytics) The unit uses longlife electrolytics, specified
n
pk
* For further information see data sheets „The SilverLine“,
„SilverLine Family Branches“ and mechanics data sheet
(AC 85...132/176...264V, DC 240...375V)
<6A (switch in 115V position)
<2.8A (switch in 230V position)
<37A at AC 264V (T
<62A at AC 264V (T
= +25°C, cold start)
<6A²s (T
according to EN 61000-3-2
Power factor: better than 0.68 at nominal
load
Transient resistance acc. to VDE 0160 / W2
(750V/1.3ms), for all load conditions.
(see Diagram overleaf)
(48V/5A, AC 230V, T
for +105°C (cf. ’The SilverLine’, p.2).
amb
= +50°C, cold start)
amb
= +25°C, cold start)
amb
= +50°C, cold start)
amb
= +40°C)
amb
UL60950 E137006
CUL/CSA-C22.2
No 60950
EMC and
Low Volt.
Directive
Output
Output voltage DC 48-56V, adjustable by (covered) front pan-
Ambient temperature
range T
amb
Rated continuous loading with convection cooling
=0°C - 60°C
•T
amb
•T
=0°C - 45°C
amb
Output is protected against short-circuit, open circuit and overload
Derating typ. 6W/K (at T
Voltage regulation better than 2% Vout overall
Ripple / Noise <50mV
Parallel operation possible; however, no equal load sharing
Overvolt. protection typ. 59V
Power back immunity 60V
Front panel indicator Green LED on front panel
Construction / Mechanics*
Housing dimensions and Weight
• W x H x D
• Free space for
ventilation
•Weight
Design advantages:
• All connection blocks are easy to reach as mounted at the front
panel.
el potentiometer; preset: 48 V ±0.5%
Adj. range guaranteed
Operation: 0°C...+70°C (>60°C: Derating)
Storage: -25°C...+85°C
48V/5A (240W) resp. 56V/4.3A (240W)
48V/6A (288W) resp. 56V/5.1A (288W)
short-term also at 60°C
= +60°C...+70°C)
amb
, (20MHz bandw., 50Ω measure-
PP
ment)
120mm x 124mm x 102mm (+ DIN rail)
above/below 25mm recommended
left/right 15mm recommended
980g
Ordering information
Order number Description
SL10.106
SLZ14
SLZ02
sl10e106 / 040511 1/2
SilverLine switched-mode power supply
Adapter for S7-300 rail
Wall mounting set
Data sheet
]
Start / Overload Behaviour
Startup delay typ. 0.1s
Rise time ca. 5-20ms, depending on load
Overload Behaviour
• Special PULS Overload Design (see
diagram overleaf)
• 20% power boost
Advantages:
• High short-circuit current, giving large ’start-up window’: unit
starts reliably even with heavy loads (DC-DC converters, motors).
• No ’sticking’ such as can occur with fold-back characteristics
• Secondary fuses operate more reliably
– no disconnection, no hiccup if over-
loaded
– high overload current (up to 1.6 I
Vout is gradually reduced with increa-
Nom
sing current.
– 6A short-term
, at 45°C or forced cooling
even continuous
Output characteristic (min.)
64
56
48
40
),
32
24
16
Output Voltage Vout [V
8
0
0 2,5 5 7,5 10 12,5
T
= 60°C / 45°C / 25°C / 0°C
amb
Vout range
Outp ut Current Io ut [A]
Further information
For further information, especially about
•EMC
• Connections
• Safety, Approvals
• Mechanics und Mounting,
see page 2 of the „The SilverLine“ data sheet.
For detailed dimensions
see SilverLine mechanics data sheet SL2.5/ SL5/ SL10
Alle Angaben gelten, sofern nicht anders angegeben, für AC 230V, +25°C Umgebungstemp. und 5
min. Einlaufzeit. Sie dienen ausschließlich der Produktbeschreibung und sind nicht als zugesicherte
Eigenschaften im Rechtssinne aufzufassen. Änderungen vorbehalten.
Your partner in power supply:
Efficiency
92
AC 230Vin / DC 56Vout
91
90
AC 230Vin / DC 48Vout
89
Efficiency [%]
88
87
1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 6,5
Output current Iout [A]
Hold-up time (typ., at V
60
50%
load
50
40
30
20
Hold-up time [ms]
10
0
80 100 120 140 160 180 200 220 240
100
90
80
70
60
50
40
30
Hold-up time [ms]
20
10
0
210 230 250 270 290 310 330 350 370 390
Power
Boost
Switch pos.
Nominal load
115V
Input voltage VACin [V]
50% load
=48V)
out
Input voltage VDCin [V]
50% load
Nom. load
Switch pos .
230V
Nominal load
Power Boos t
with 50% Load = 120W /
European
Power Supply
Manufacturers
Association
Power
Boost
ACin
DCin
Bayerns Best 50
Czech 100 Best
Europe’s 500
2/2 sl10e106 / 040511
Arabellastraße 15
D-81925 München
Tel.: +49 89 9278-0
Fax: +49 89 9278-199
www.puls-power.com
PULS GmbH
Loading...