Puls QS20.241, QS20.241-C1 Accessories Catalog

Q-Series

QS20.241, QS20.241-C1

24V, 20A, SINGLE PHASE INPUT

26. ACCESSORY

ZM1.WALL Wall mounting bracket This bracket is used to mount Dimension units onto a flat surface without utilizing a DIN-Rail. The two aluminum

brackets and the black plastic slider of the unit have to be detached, so that the two steel brackets can be mounted.

Fig. 26-1 ZM1.WALL Wall Mounting Bracket Fig. 26-2 Assembled Wall Mounting Bracket

Please note: Symbolic drawing, picture show a different model

ZM15.SIDE Side mounting bracket This bracket is used to mount Dimension units sideways with or without utilizing a DIN-Rail. The two aluminum

brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can be mounted. For sideways DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on

the steel bracket.

Fig. 26-3 Side Mounting Bracket Fig. 26-4 Side Mounting with DIN-rail brackets

Please note: Symbolic drawing, picture show a different model

Jan. 2008 / Rev. 1.3 DS-QS20.241-EN All parameters are specified at 24V, 20A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0 Germany

18/25