Puch Maxi Owner's Manual
A)
SERIAL
NUMBER
LOCATION
The engine -number
is
stamped
on
top of the right crankcase
half.
1-Speed Automatic
2-Speed Automatic
The specification
plate
is
secured to the right side
of
the frame.
7
8
IMPORTANT!
Write down your
key-number
at
once.
This saves time,
money and
annoyance
if
the
keys are
lost.
The frame serial number is stamped
on
the right side of the
frame, just beneath the seat post.
My
key number
is ------------
------
-----------------------------------------------------_____
_
B)
OPERATING
CONTROLS
The positions of the controls are shown
in
the enclosed technical
data sheet.
Following some operating controls described
in
detail:
Locking and
unlocking
your
moped
To lock, move handlebar to the right.
Insert key into lock.
Turn key to the left, push
in
and turn key to the right.
Remove key.
Unlocking
is
accomplished
in
reverse order.
Lock
is
optional
on
Maxi and may be service installed at your
PUGH
dealer.
Fuel
tank
filler
cap
To open turn filler cap counter clockwise.
9
Loading...