PTN TPHD403P, TPHD403PT, TPHD403PR User Manual

www.PTN-electronics.com

TPHD403P

PTN HDBaseT Pro Extender with PoC

All Rights Reserved

Version: TPHD403P_2014V2.1

User Manual

HDBaseT Pro Extender

PTN Electronics Limited www.PTN-electronics.com

SAFETY PRECAUTIONS

To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.

 Unpack the equipment carefully and save the original box and packing material for

possible future shipment

 Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

 Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

 Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

 Refer all servicing to qualified service personnel.
 To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this

product near water.

 Do not put any heavy items on the extension cable in case of extrusion.
 Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

 Install the device in a place with fine ventilation to avoid damage caused by

overheat.

 Keep the module away from liquids.
 Spillage into the housing may result in fire, electrical shock, or equipment damage. If

an object or liquid falls or spills on to the housing, unplug the module immediately.

 Do not twist or pull by force ends of the optical cable. It can cause malfunction.
 Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

 Unplug the power cord when left unused for a long period of time.

HDBaseT Pro Extender

PTN Electronics Limited www.PTN-electronics.com

NOTICE: Please read this user manual carefully before using this product.

Pictures shown on this manual are for reference only, different model and specifications
are subject to real product.

This manual is only for operation instruction only, not for any maintenance usage.
The functions described in this version are updated till April 2014. Any changes of
functions and parameters since then will be informed separately. Please refer to the
dealers for the latest details.

This manual is copyright PTN Electronics Limited. All rights reserved. No part of
this publication may be copied or reproduced without the prior written consent of
PTN Electronics Limited.

All product function is valid till 2014-04-16.

HDBaseT Pro Extender

PTN Electronics Limited www.PTN-electronics.com

Table of Contents

1. Introduction ................................................................................................................. 1

1.1 Introduction to TPHD403P ................................................................................. 1

1.2 Features ............................................................................................................ 1

1.3 Package Contents ............................................................................................. 1

2. Introduction of Product Appearance ................................................................ ............ 2

2.1 Product Appearance of TPHD403PT ................................................................. 2

2.2 Product Appearance of TPHD403PR ................................................................ 3

2.3 Twisted Pair Cable Connection .......................................................................... 4

3. System Connection ................................ ................................ ................................ ..... 4

3.1 Usage Precautions ............................................................................................ 4

3.2 System Diagram ................................................................................................ 5

3.3 Connection Procedure ....................................................................................... 5

3.4 System Applications .......................................................................................... 6

4. Specification ............................................................................................................... 6

5. Panel Drawing ............................................................................................................ 8

6. Troubleshooting & Maintenance ................................................................................. 9

7. After-sales Service .................................................................................................... 10

4K HDBaseT Splitter 1x4 with PoC

PTN Electronics Limited 1 www.PTN-electronics.com

1. Introduction

1.1 Introduction to TPHD403P

TPHD403P is an HDMI/IR/RS232 twisted pair extender including one transmitter
(TPHD403PT) and one receiver (TPHD403PR). It is a professional 1x1 extender, with a
single CAT5e cable, the input HDMI signal can be long-distance transmitted, and the
control signal (IR & RS232) is able to work in a bi-directional way, and PoC are
supported by TPHD403P. With its Ethernet ports, TPHD403P also supports internet
access to work in a LAN.

1.2 Features

 HDBaseT technology
 High Bandwidth: 10.2Gps
 Support CEC
 Support 3D
 Support PoC, eliminating the complexity of installing local power supplies.
 HDMI/IR/RS232 signal transmitted over single CAT5e/CAT6 twist pair.
 Max transmission distance is up to 90 meters for 1080P signals.
 Max transmission distance is up to 60 meters for 4K×2K signals.
 Support Ethernet expanding.
 HDTV Compatible, use HDMI 1.4a and HDCP compliant.
 Support 1080P, 1080i, 720P, 576P, 576i, 480P, and 480i.
 High quality output video signal with 24bit/36bit deep color.
 Bi-directional RS232 control.
 Bi-directional IR control.
 LED indicators show work status.
 Wall/table-mountable aluminium enclosure with PT case design.

Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be
better and should be well grounded) for good transmission effect.

1.3 Package Contents

 1 x TPHD403PT
 1 x TPHD403PR
 4 x Mounting ears (Separated from TPHD403PT and TPHD403PR)
 1 x Power adapter (DC 24V)
 8 x Plastic cushions
 2 x IR Emitter (MYS-003B Φ3.5mm plug, not included, selectable)
 2 x IR receiver (TSMP1138 Φ3.5mm plug, not included, selectable)
 2 x RS232 cables
 8 x Screws (3*6mm)
 1 x User manual

Notes：Please confirm if the product and the accessories are all included, if not, please