PTN TPHD402P User Manual

www.PTN-electronics.com

TPHD402P

HDMI/IR/RS232 Twisted Pair PoC Extender

All Rights Reserved

Version: TPHD402P_2014V1.3

User Manual

HDMI/IR/RS232 Twisted Pair PoC Extender

PTN Electronics Limited www.PTN-electronics.com

SAFETY PRECAUTIONS

To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.

 Unpack the equipment carefully and save the original box and packing material for

possible future shipment

 Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

 Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

 Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

 Refer all servicing to qualified service personnel.
 To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this

product near water.

 Do not put any heavy items on the extension cable in case of extrusion.
 Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

 Install the device in a place with fine ventilation to avoid damage caused by

overheat.

 Keep the module away from liquids.
 Spillage into the housing may result in fire, electrical shock, or equipment damage. If

an object or liquid falls or spills on to the housing, unplug the module immediately.

 Do not twist or pull by force ends of the optical cable. It can cause malfunction.
 Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

 Unplug the power cord when left unused for a long period of time.
 Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

HDMI/IR/RS232 Twisted Pair PoC Extender

PTN Electronics Limited www.PTN-electronics.com

NOTICE: Please read this user manual carefully before using this product.

Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.

This manual is for operation instruction only, not for any maintenance usage.
Compared to the former TPHD402P user manual version, this version removes the
built-in IR receiver and adds collocation products. The functions described in this
version are updated till April 2014. Any changes of functions and parameters since
then will be informed separately. Please refer to the dealers for the latest details.

This manual is copyright PTN Electronics Limited. All rights reserved. No part of
this publication may be copied or reproduced without the prior written consent of
PTN Electronics Limited.

All product function is valid till 2014-04-28.

HDMI/IR/RS232 Twisted Pair PoC Extender

PTN Electronics Limited www.PTN-electronics.com

Contents

1. Introduction ................................................................................................................. 1

1.1 Introduction to TPHD402P ................................................................................. 1

1.2 Features ............................................................................................................ 1

1.3 Package Contents ............................................................................................. 1

2. Introduction of Product Appearance ............................................................................ 2

2.1 Appearance of TPHD402PT .............................................................................. 2

2.2 Appearance of TPHD402PR .............................................................................. 3

3. System Connection ..................................................................................................... 4

3.1 Usage Precautions ............................................................................................ 4

3.2 System Diagram ................................................................................................ 4

3.3 Connection Procedure ....................................................................................... 4

3.4 Application ......................................................................................................... 4

3.5 Twisted Pair Cable Connection .......................................................................... 5

3.6 Collocation Products .......................................................................................... 5

4. Specification ............................................................................................................... 7

5. Panel Drawing ............................................................................................................ 8

6. Troubleshooting & Maintenance ................................................................................. 9

7. After-sales Service .................................................................................................... 10

HDMI/IR/RS232 Twisted Pair PoC Extender

PTN Electronics Limited 1 www.PTN-electronics.com

1. Introduction

1.1 Introduction to TPHD402P

TPHD402P is an HDMI/IR/RS232 twisted pair including a transmitter (TPHD402PT) and
receiver (TPHD402PR). The TPHD402P uses HDBaseT technology to deliver HDMI
signal, max transmission distance up to 60 meters with CAT5e/CAT6 cable. CEC,
bi-directional RS232&IR control, and PoC are supported by TPHD402P.

1.2 Features

 Support Full HD: Delivers resolutions including 800x600@60Hz, 1024x768@Hz,

1280x720@60Hz, 1280x1024@60Hz, 1366x768@60Hz, 1600x1200@60Hz,
1920x1080@60Hz, 1920x1200@60Hz, 3D, 4K×2K

 Max transmission distance is up to 60 meters over single CAT5e/CAT6 cable.
 High Bandwidth: 10.2Gps.
 HDTV Compatible, use HDMI 1.4 and HDCP compliant.
 Support PoC & CEC.
 Connect with a displayer to transmit EDID and HPD signals constantly by using a

CAT5e cable.

 Use HDBaseT technology.
 Bi-directional RS232/IR control.
 LED indicators show work status.
 Wall/table-mountable aluminium enclosure, PT case design.

Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be
better and should be well grounded) for good transmission effect.

1.3 Package Contents

 1 x TPHD402PT
 1 x TPHD402PR
 4 x Mounting brackets (Separated from TPHD402P)
 8 x Plastic cushions
 2 x RS232 cables
 8 x Screws
 2 x Power adapters (DC 24V)
 1 x User manual

Notes: Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.