PTN SUH25E KIT User Manual

www.PTN-electronics.com

SUH25E KIT

4K 2x5 HDBaseT Splitter Kit

All Rights Reserved

Version: SUH25E KIT_2017V1.1

User Manual

4K 2x5 HDBaseT Splitter Kit

PTN Electronics Limited www.PTN-Electronics.com

Preface

Read this user manual carefully before using the product. Pictures shown in this manual
is for reference only. Different models and specifications are subject to real product.

This manual is only for operation instruction only. The functions described in this version
are updated till August 14, 2017. In the constant effort to improve our product, we
reserve the right to make functions or parameters changes without notice or obligation.
Please refer to the dealers for the latest details.

Trademarks

Product model, PTN and its logo are trademarks of PTN Electronics Limited.
Any other trademarks mentioned in this manual are acknowledged as the properties of
the trademark owner. No part of this publication may be copied or reproduced without
the prior written consent of PTN Electronics Limited.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.

Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.

Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

4K 2x5 HDBaseT Splitter Kit

PTN Electronics Limited www.PTN-Electronics.com

SAFETY PRECAUTIONS

To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.

 Unpack the equipment carefully and save the original box and packing material for

possible future shipment

 Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

 Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

 Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

 Refer all servicing to qualified service personnel.
 To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this

product near water.

 Do not put any heavy items on the extension cable in case of extrusion.
 Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

 Install the device in a place with fine ventilation to avoid damage caused by

overheat.

 Keep the module away from liquids.
 Spillage into the housing may result in fire, electrical shock, or equipment damage. If

an object or liquid falls or spills on to the housing, unplug the module immediately.

 Do not twist or pull by force ends of the optical cable. It can cause malfunction.
 Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

 Unplug the power cord when left unused for a long period of time.
 Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

4K 2x5 HDBaseT Splitter Kit

PTN Electronics Limited www.PTN-Electronics.com

Contents

1. Introduction ................................................................................................................. 1

1.1 Introduction to SUH25E KIT .............................................................................. 1

1.2 Features ............................................................................................................ 1

1.3 Package List ...................................................................................................... 2

2. Panel Description ........................................................................................................ 3

2.1 4K 2x5 HDBaseT Splitter ................................................................................... 3

2.2 HDBaseT Receiver ............................................................................................ 4

2.3 Wallplate Control Keypad .................................................................................. 5

3. System Connection ................................................................ ................................ ..... 6

3.1 Usage Precautions ............................................................................................ 6

3.2 System Diagram ................................................................................................ 6

3.3 Connection Procedure ....................................................................................... 6

3.4 Twisted Pair Cable Connection .......................................................................... 7

4. System Operation ....................................................................................................... 8

4.1 Video Switching ................................................................................................. 8

4.2 Control far-end display ...................................................................................... 8

4.3 EDID Management ............................................................................................ 9

5. Specification ............................................................................................................. 10

5.1 4K 2x5 HDBaseT Splitter ................................................................................. 10

5.2 HDBaseT Receiver .......................................................................................... 10

5.1 Wallplate Control Keypad ................................................................................ 11

6. Panel Drawing .......................................................................................................... 12

6.1 4K 2x5 HDBaseT Splitter ................................................................................. 12

6.2 HDBaseT Receiver .......................................................................................... 12

6.3 Wallplate Control Keypad ................................................................................ 13

7. Troubleshooting & Maintenance ............................................................................... 14

8. Customer Service ..................................................................................................... 15

4K 2x5 HDBaseT Splitter Kit

PTN Electronics Limited 1 www.PTN-electronics.com

1. Introduction

1.1 Introduction to SUH25E KIT

SUH25E KIT is a 4K 2x5 HDBaseT Splitter Kit designed to provide HDMI video
switching, video distribution and extension, system control and audio de-embedding in a
convenient kit. It includes 1 HDBaseT Splitter (SUH25E), 4 HDBaseT Receivers
(TPHD-BYE-R) and 1 Wallplate Control Keypad (WP2-US).

One of two HDMI sources can be selected and distributed to 4 HDBaseT and one
mirrored HDMI outputs. The video extension distance from HDBaseT Splitter to
HDBaseT Receivers can up to 70m at 1080p or 40m at 4K@60Hz 4:2:0.

The kit also supports IR control, the IR signals can be sent to far-end IR output on
HDBaseT Receivers to control far-end displays. Additionally, it support audio
de-embedding via COAX and balanced analog audio outputs.

1.2 Features

 Features 2 HDMI inputs, 4 HDBaseT outputs, 1 mirrored HDMI output, 1 COAX

output and 1 balanced analog audio output.

 The highest video resolution supports 4Kx2K@60Hz 4:2:0.
 HDMI1.4&HDCP2.2 compliant, and is backwards compatible with previous

version of HDCP and HDMI.

 Transmits 4Kx2K up to 131ft (40m) or 1080p up to 230ft (70m) via HDBaseT port.
 Supports PoC, the HDBaseT Receivers can be powered by HDBaseT Splitter via

HDBaseT ports.

 Supports IR passthough to control far-end displays from local.
 Supports external Wallplate Control Keypad to switch HDMI input and turn on/off

displays.

 Real-time display of working status via LED indicators.
 Support advanced EDID management.

4K 2x5 HDBaseT Splitter Kit

PTN Electronics Limited 2 www.PTN-electronics.com

1.3 Package List

HDBaseT Splitter

 1 x SUH25E 4K 2x5 HDBaseT Splitter
 2 x Mounting Ears with 4 Screws
 1 x Power Adapter (24VDC 2.71A)
 4 x Plastic Cushions
 5 x IR Receiver (5V)
 4 x IR Emitter (5V)

HDBaseT Receivers

 4 x TPHD-BYE-R HDBaseT Receivers
 8 x Mounting Ears with 8 Screws
 16 x Plastic Cushions

Wallplate Control Keypad

 1 x WP2-US Wallplate Control Keypad
 2 x Mounting Screws
 1 x Connection Cable

 1 x User Manual

Note: Please contact your distributor immediately if you found any damage or defect in
the components.