PTM Print to Mail Endeavour Operator's Manual

Operator’s Manual

ii

Table of Contents

Operator Safety ............................................................................................ 1

Introduction .................................................................................................. 2

Unpa c k in g and Setup .................................................................................. 3

Unpacking ................................................................................................ 3

Setup ........................................................................................................ 4

ENDEAVOUR Overview ............................................................................... 5

ENDEAVOUR Diagram ............................................................................. 5

Capabilities ............................................................................................... 5

ENDEAVOUR Operation .............................................................................. 6

Identifying Your Fold ................................................................................. 6

Feed Table Setup ..................................................................................... 6

Setting the Paper Guide Width .............................................................. 6

Setting the Feed Gauge ........................................................................ 7

Loading the Feed Table ........................................................................... 8

Setting the Fold Plates .............................................................................. 9

To set a fold plate: ................................................................................ 9

Fold Plates .............................................................................................. 10

Maintenance............................................................................................... 11

Troubleshooting ......................................................................................... 12

Automatically Clearing a Paper Jam ...................................................... 12

Manually Clearing a Paper Jam .............................................................. 12

Diagnosin g the Paper Jam ..................................................................... 13

Misaligned Folds .................................................................................... 13

Paper Feed Problems ............................................................................. 14

Double Feeds ...................................................................................... 14

Won’t Feed .......................................................................................... 14

END EAVOUR W on’t Ru n ........................................................................ 14



iii

iv

Operator Safety

 Please review and follow all the safety precautions to ensure safe

equipment operation. The user is responsible for safe operating

conditions. Read all operating instructions prior to operating the

ENDEAVOUR.

Warning: Do not attempt to handle the equipment alone. It requires

two people to handle and lift the equipment out of the packaging.

Warning: This unit contains moving parts. Watch for Caution,
Warning, and Electrical stickers detailing proper operating conditions

and user safety.

 Never remove guards or product safety switches. Removal of

guards or switches will cause the unit to run improperly and can result
in personal injury.

 Keep all hands, fingers and objects away from moving parts.

Never attempt to reach into the ENDEAVOUR while the power is on.
Turn off the ENDEAVOUR and disconnect the power cord before
cleaning or servicing the ENDEAVOUR, and before removing either
fold plate. Injury may occur if proper operating procedure is not
followed.

 Plug the power cord into 115 VAC 60 Hz outlet only. Voltage up to

120 volts will not damage the ENDEAVOUR.

 The Power Cord and Plug must be accessible at all times for

disconnection.

 This unit is equipped with a 3-Wire grounded electrical cord. If the cord

becomes damaged and needs to be replaced, it must be replaced with
an authorized part available through the manufacturer or an authorized
service agent.

 All ENDEAVOUR maintenance should be performed only by factory

authorized service personnel using factory authorized replacement
parts. Contact PTM Document Systems for more information.

 Keep product away from extreme heat & moisture.
 Never operate ENDEAVOUR while tired, drowsy, or under the

influence of medication, drugs, or alcohol. Failure to do so can result in
personal injury.

 Never operate unit with loose clothing or jewelry. Contain all long hair

and neck ties prior to operating ENDEAVOUR. Failure to do so could
result in clothing, jewelry, or hair becoming entangled in moving parts.

1

Introduction

The ENDEAVOUR is designed to fold and seal up to 3000 documents per
hour. Patented folding & sealing technologies ensure a good seal on every
form and a clean fold every time whether the paper is perforated or plain.
The adjustable fold plates allow the ENDEAVOUR to meet your changing
document processing requirements. Below are the detailed ENDEAVOUR
specs.

Feed System
Drive System
Electrical
Paper Sizes
Fold Patterns

Speed

Bottom Feed Friction Belt
A.C. Fixed
115V AC, 60 Hz, 3A
Length up to 14”, width up to 8.5”
11” Half (V)

11” Letter C
11” Z

3000 Documents Per Hour Fixed Continuous

14” Half (V)
14” C
14” Return Envelope (EC)
14” Z
14” ECC Z

Dimensions
Weight

Height 12”, Width 20”, Depth 16.5”
55 Lbs.

2