Psion ST4002, ST4003 Quick Start Manual

FRONT

Docking connector

Spare battery
charge well

FEATURES GETTING STARTED

Battery connector

Release button

Omnii compartment

Spare battery
charge well

LED indicator

Choose a plug for the Universal Power Adaptor.

Docking connector

REAR PORTS

ST4002

ST4003

DC In port

Client USB
port

Host USB
port

Client USB port

Host USB port

DE9M serial port

RJ45 Ethernet port

Omnii compartment

Locking arm

The ST4003 Desktop Docking Station additionally provides:

> A DE9M serial port (unpowered).
> An RJ45 10Base-T Ethernet interface. Both these interfaces

are compatible with the USB to Ethernet/serial drivers in­cluded in Omnii.

FEATURESCONTENTS OF THE BOX

Docking Station ST4002 or ST4003

USB Micro-B to Type A cable

1

2

OVER

>

This Guide

Omnii Accessories
Regulatory & Warranty Guide

OPERATION

BACK AND BATTERY CHARGE WELL

ST1050 AC Power Supply with regional adaptors

feature:

> Fast charging of the Omnii internal battery.
> Fast charging of the spare battery pack.
> A Host USB port to connect peripherals such as a

printer, keyboard, etc.

> A Client USB port to connect the docking station to a PC.

The ST4002 and ST4003 Desktop Docking Stations both

Insert Omnii to charge its battery.

Note: Use only the universal AC power supply approved by Psion for

use with the Docking Station.

Slide Omnii into the Docking Station until it latches.

1. Press the button on the power adaptor to release the plug.

2. Slide the existing plug out of the adaptor.

3. Slide the desired plug into the adaptor until it clicks.

8 0 0 0 2 0 3

CONNECTING THE DOCKING STATION TO
A HOST COMPUTER

USB host computer

Omnii acts as a USB Client in the Docking Station.

QUICK START
GUIDE

August 2, 2011
PN 8000203.C

ISO 9001 Certifi ed
Quality Management System

Charge LED Behaviour Function

OFF No battery detected.

Solid Green Battery charging complete.

Flashing Green Charge in progress.

Flashing Yellow Battery is not charging due to out-of-temper-

ature conditions.

Solid Red Unable to read battery or non Psion battery.

Note: Full battery performance is only

reached after the fi rst few
charge/discharge cycles.

3-4 h

0 - 40 °C
32 - 104 °F

Allow Omnii and the spare battery to charge for 3-4
hours before fi rst use.

4

Docking Station Battery Charge LED Behaviour

Insert the spare battery.

> During charge, the LED indicator on Omnii

fl ashes GREEN.

> When fi nished charging, the indicator

displays solid GREEN.

> The LED indicator on the Docking Station

behaves the same when a spare battery is being
charged.

Place the battery contacts down to mate with the connector, then
pivot the battery into place in the battery charge well.

3

DESKTOP DOCKING
STATIONS

ST1050 power supply

IEC320-C13
power cord

USB Micro-B to Type A cable

1. Connect the smaller end of the USB cable to the Docking Sta­tion (ST4002 shown).

2. Connect the fl at end of the USB cable to the host computer.

The spare battery may require an extra 4 hours to charge if an
Omnii is also docked.

© Copyright 2011 by Psion Inc.

2100 Meadowvale Boulevard, Mississauga, Ontario, Canada L5N 7J9

http://www.psion.com

Psion, the Psion logo, and the names of other products and services provided by
Psion are trademarks of Psion Inc. All trademarks used herein are the property of
their respective owners.