Psion RA2020 ANTENNA CO LOCATION WARNING
Chapter 2: Installation Requirements
Power And Antenna Cables
2.1.3 Power And Antenna Cables
2.1.3.1 P ow er
To prevent accidental d isconnection and stress on the 9150, anten na and power
cables should be secured within 30 cm of the unit. Secure the cables with ties to
the cable tie mounts on the 9150 (see Figur e2.1 on page 16). A single phase power
outlet (range 100 to 240 VAC rated 1.0A mi nimum) should be installed within one
metre (3.1 feet) of the 9 150. The 9150 automatically adjusts to input within that
power range. The power cable is removable and is available in the power type specific to your location.
To eliminate the need for AC wiring, the 9150DC Wirel ess Gateway is power ed
over its Et hernet connection. For detailed inform ation, please see page 20.
Warning: To avoid electric shock, the power cord protective grounding
conductor must always be connected to ground.
2.1.3.2 Antennas
Warning: This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Warning: Equipment requires professional installation of antennas.
The maximum output power from the radio transmitter is 36 mW
Teklogix 9150 Wireless Gateway User Manual 17
Loading...