Psion NEO PX3004 Quick Start Manual

The Quad Docking Station can be fi xed to the optional
Wall Mount Bracket (model PX3014), or to another surface,
by two broad-headed screws.

Contents of the box:

Features: Front, Back, And Ports

The Quad Docking Station

This Guide

Power cord
(dependent on country
and order)

Docking connectors (quantity 4)

Charging compartment (quantity 4)

IS
O

9
0
0

1
C
e

r
t
i
f
i
e

d


Q
u
a

l
i
t
y
M

a
n
a

g
e
m

e
n
t

S
y
s
t

e
m

AC/DC adaptor

Ethernet connector

DC In connector

Mounting The Quad Docking Station

Mounting screws (quantity 2)

Mounting holes (quantity 2)

Getting Started

Over

Insert one or more NEO hand-held computers.

4

Allow the NEO computers to charge for three hours
before fi rst use.

Note: Use only the universal AC power
supply approved by Psion Teklogix for
use with the Quad Docking Station.

Note: Full battery performance is only reached after
the fi rst few charge/discharge cycles.

3 h

0 - 40 °C

32 - 104 °F

1

Connect the Docking Station to external power.

Mount the Quad Docking Station.

Connect the Docking Station to an Ethernet network.

3

2

10 or 100base-T
Ethernet connector

Power
cord

The Ethernet connection in the Quad Docking Station

NEO hand-held computers
(up to 4)

Internal Ethernet connection

Quad Docking Station

Ethernet hub

10 or 100baseT Ethernet

Rubber feet (quantity 4)

Note: The position of
the mounting holes is
indicated by markings on
the front and sides of the
Quad Docking Station.

Slide NEO into the Docking
Station until it latches.

Power adaptor

DC input connector

AC outlet

PX-3004

Quad Docking Station

Quick Start Guide

Ethernet connector

Link LED

Speed LED

Power indicator

USB to Ethernet converter (4)

Note: During charge, the LED indicator on
NEO is YELLOW until charging reaches 75%.
Between 75% and 95% the indicator fl ashes
GREEN slowly, and, above 95%, the indicator
is GREEN continuously.

Drain holes (quantity 4)

Insert the screws into the holes on the base of the unit, then
slide the unit towards the back to secure it.

Note: The power indicator glows green
when the Docking Station is connected
to external power.

Power indicator

November 14, 2008

PN: 8000177.A

neo_quad_dock_qsg.indd 1neo_quad_dock_qsg.indd 1 14/11/2008 16:30:4014/11/2008 16:30:40

ISO 9001 Certifi ed
Quality Management System

Quick Start Guide

Rev. A

Psion Teklogix and NEO are trademarks
of Psion Teklogix Inc. Other product
names mentioned in this document are
trademarks or registered trademarks
of other hardware, software, or service
providers and are used herein for
identifi cation purposes only.

Location Guide For Mounting Screws

23.0 cm (9.10 in)

6.40 cm (2.51 in)

3.50 cm (1.38 in)

28.8 cm (11.3 in)

1.90 cm
(0.750 in)

Outline of
Quad Docking Station

Mounting holes

Rubber feet

Quad Docking Station

™

PX3004

3.50 cm (1.38 in)

4.75 cm
(1.87 in)

7.50 cm
(2.95 in)

1.90 cm
(0.750 in)

13.3 cm
(5.24 in)

35.8 cm (14.1 in)

The mounting screws on the shelf are M4 x 6mm panhead screws.

Front of
Docking
Station

Dimensions Of Mounting Screws

1.05 cm (0.41 in)

0.45 cm (0.18 in)

0.4 cm (0.16 in)

0.65 cm (0.26 in)

Maximum diameter of screw head:

Maximum diameter of screw shaft:

Maximum height of screw head:

Maximum height between screw
head and mounting surface:

8000177

November 14, 2008 PN: 8000177.A

8000177

neo_quad_dock_qsg.indd 2neo_quad_dock_qsg.indd 2 14/11/2008 16:31:0614/11/2008 16:31:06