Psion HFT2A3 Users Manual

RFID Paddle HF-T2-A3: INSTRUCTIONS

Important: All Approval and safety information is outlined in the ‘7535 G2 Handheld-computer User

Manual’ or ‘WorkAbout Pro G2 Handheld-computer User Manual’ – part number. This manual is available
on our website www.psionteklogix.com

Easily installable RFID Paddle HF-T2-A3 for the WORKABOUT PRO G2 allows you to customise this
hand-held to meet your specific mobile computing requirements. This chapter outlines how to install the
RFID Paddle HF-T2-A3.

• Connect the RFID Paddle HF-T2-A3 to the Tether connector.

through the Teknet extranet

Easily installable RFID Paddle HF-T2-A3 for the 7535 G2 allows you to customise this hand-held to meet
your specific mobile computing requirements. This chapter outlines how to install the RFID Paddle HF-T2­A3.

• Connect the RFID Paddle HF-T2-A3 to the JAE connector.

Easily installable RFID Paddle HF-T2-A3 for computer. This chapter outlines how to install the RFID
Paddle HF-T2-A3.

• Connect the DB9 connector to the serial communication port.

January 28, 2008

RFID Paddle HF-T2-A3 Sheet 1 of 6

Options Power supply:

1. Using USB Power

• Connect the USB connector to the USB port (this is only for the power supply of the PADDLE
reader).

2. Using DB9 Pin 9 power

• Connect the DIN Female connector to the DIN Male connector (this is only for the power supply
by the PIN 9 on the DB9 connector).

3. Using custom power supply

• Sold the Cable on the DIN Female connector in following:

+5V

Masse

Custom Cable

January 28, 2008

RFID Paddle HF-T2-A3 Sheet 2 of 6