Psion HFAM1NEO Users Manual

NEO RFID MODULE HF-AM1-NEO

EXPANSION MODULE INSTRUCTIONS

Important:

Manual’– part number 8100157.

Important:
body. This product must not be used in a holster or on a belt-clip.

Easily installable expansion modules for the NEO allow you to customise this hand-held to meet your
specific mobile computing requirements. This chapter outlines how to install the RFID Module HF-AM1­NEO.

.

• The RFID Module HF-AM1-NEO is connected by the expansion port

All Approval and safety information is outlined in the ‘NEO™ Handheld Computer User

The NEO with the RFID option must not be held closer than 20 cm from the rest of the

Expansion port

NEO Back Pack RFID Device

Important: Remove the expansion port plastic part before a back pack RFID module is being
installed.

• Screw the RFID Back Pack with M2 X 8 screws on the NEO.

For detailed instructions, pleased refer to NEO Handheld Computer User Manual and to the RFID
MODULE HF-AM1-NEO User manual.

May 14, 2009

DPD A00509 A00 Sheet 1 of 3

Important:
the body. This product must not be used in a holster or on a belt-clip.

READING AREA:

This area depends on the TAG type, TAG packaging, TAG position and environment (metalli c or not).

The NEO PDA with the RFID option must not be held closer than 20 cm from the rest of

TAG

Reading Area

May 14, 2009

DPD A00509 A00 Sheet 2 of 3