This document and the information it contains is the property of Psion
Teklogix Inc., is issued in strict confidence, and is not to be reproduced or
copied, in whole or in part, except for the sole purpose of promoting the sale
of Psion Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or
in any manner detrimental to the interests of Psion Teklogix Inc.
All trademarks are the property of their respective holders.
Return-T o-F actory Warranty
Psion T eklogix warrants a return-to-f actory warranty for a period of one year.
In some regions, the warranty exceeds this period. Please contact your local
Psion Teklogix office for details. For a list of offices, refer to “Support Services & Worldwide Offices” on page 38. The warranty on Psion Teklogix
manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an
authorized Psion Teklogix service organization. See Psion Teklogix terms
and conditions of sale for full details.
Service
When requesting service, please provide information concerning the nature
of the failure and the manner in which the equipment was used when the failure occurred. Type, model, and serial number should also be provided.
Before returning any products to Psion Teklogix, please call the Customer
Services Group for a Return Authorization number.
Support Services
Psion Teklogix provides a complete range of product support services to its
customers. For detailed information, please refer to “Support Services &
Worldwide Offices” on page 38.
Disclaimer
Every effort has been made to make this material complete, accurate, and upto-date. Psion T eklogix Inc. reserves the right to make changes without notice
and shall not be responsible for any damages, including but not limited to
consequential damages, caused by reliance on the material presented, including but not limited to typographical errors.
Erlanger, KY, 41018, USA
Contact Person: Kyle Day
Telephone No.: (859) 372-4329
Kyle Day
V.P. Channel Sales
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide3
CE Marking
When used in a residential, commercial or light industrial environment the product and its approved UK and European peripherals fulfill all requirements for CE marking.
R&TTE Directive 1999/5/EC
This equipment complies with the essential requirements of EU
Directive 1999/5/EC (Declaration available: www.psionteklogix.com).
Cet équipement est conforme aux principales caractéristiques
définies dans la Directive européenne RTTE 1999/5/CE. (Déclaration disponible sur le site: www.psionteklogix.com).
Die Geräte erfüllen die grundlegenden Anforderungen der RTTERichtlinie (1999/5/EG). (Den Wortlaut der Richtlinie finden Sie
unter: www.psionteklogix.com).
Questa apparecchiatura è conforme ai requisiti essenziali della Direttiva Europea R&TTE 1999/5/CE. (Dichiarazione disponibile sul
sito: www.psionteklogix.com).
Este equipo cumple los requisitos principales de la Directiva 1995/5/
CE de la UE, “Equipos de Terminales de Radio y Telecomu-nicaciones”. (Declaración disponible en: www.psionteklogix.com).
Este equipamento cumpre os requisitos essenciais da Directiva 1999/
5/CE do Parlamento Europeu e do Conselho (Directiva RTT).
(Declaração disponível no endereço: www .psionteklogix.com).
4Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide
Deze apparatuur voldoet aan de noodzakelijke vereisten van EUrichtlijn betreffende radioapparatuur en telecommunicatie-eindapparatuur 199/5/EG. (verklaring beschikbaar: www .psionteklogix.com).
Dette udstyr opfylder de Væsentlige krav i EU's direktiv 1999/5/EC
om Radio- og teleterminaludstyr. (Erklæring findes på: www.psionteklogix.com).
Dette utstyret er i overensstemmelse med hovedkravene i R&TTEdirektivet (1999/5/EC) fra EU. (Erklæring finnes på: www.psionteklogix.com).
Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om
ansluten teleutrustning och ömsesidigt erkännande av utrustningens
överensstämmelse (R&TTE). (Förklaringen finns att läsa på:
www.psionteklogix.com).
Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU
R&TTE Directive 1999/5/EC) vaatimuksia. (Julkilausuma
nähtävillä osoitteessa: www.psionteklogix.com).
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide5
Use of the 802.11b WORKABOUT PR O S in France:
Owing to French Government restrictions, the French
802.11b WORKABOUT PRO S is limited to indoor use.
They may be used outdoors, on private property, only with
prior authorization from the French Ministry of Defense.
1. FCC Information to Users
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by
one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This de vice may not
6Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC Caution: Any changes or modifications not e xpressly appro ved
by the party responsible for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance.
This device complies with FCC RF Exposure limits set forth for an
uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2)
The equipment has been SAR-evaluated for use in PDA.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
2.Warning to Users
Warning:
Changes or modifications not expressly approved by Psion
T eklogix Inc. could v oid the user's authority to operate the
equipment.
This product complies with CDRH 21 CFR 1040 Class II and IEC
60825-1:1993+A1:1997+A2:2001 laser product.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide7
L
W
ASER
ARNINGS
For your own safety, it is critical that you comply with the following warnings:
C
AUTION
The laser aperture is located in the front of terminal.
into the laser beam or point the beam at people or animals.
AUTION
C
Using controls or adjustments, or performing procedures other
than those specified herein may result in hazardous radiation
exposure.
C
AUTION
The use of optical instruments with this product will increase eye
hazard.
This product contains a laser scanner that emits less than 1.4 mW
maximum radiant power at a wavelength of 650nm to 680nm.
This product complies with CDRH 21 CFR 1040 Class II and
IEC 60825-1:1993+A1:1997+A2:2001 Class 2 laser product.
D
N
O
O
OT
PERATE
I
A
N
E
N
XPLOSIVE
A
TMOSPHERE
Operating Psion Teklogix equipment where explosive gas is
present may result in an explosion.
D
N
R
O
OT
EMOVE
C
OVERS
O
O
E
R
PEN
NCLOSURES
T o av oid injury , the equipment co vers and enclosures should only
be removed by qualified service personnel. Do not operate the
equipment without the covers and enclosures properly installed.
For qualified personnel: Remove the battery pack before
removing the cover and enclosures.
Do not look
8Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide
!
!
C
AUTION
Danger of explosion if a battery is incorrectly handled, charged,
disposed of or replaced. Replace only with the same type recommended or sold by the manufacturer – i.e., Model WA3000 or
Model WA3002. Dispose of used batteries according to the
instructions listed under the heading “The Battery” on page 15.
Carefully review all battery safety issues.
V
ORSICHT
Explosiongefahr bei unsachgemäßem Austausch der Batterie
Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ. Entsorgung gebrauchter Batterien
nach Angaben des Herstellers.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide9
1. Basic Preparation
Important:
This quick start guide provides basic information on the operation
and features of the Psion Teklogix WORKABOUT PRO S HandHeld Computer. For more detailed information, refer to the WORK-
ABOUT PRO Hand-Held Computer User Manual (PN 8000024) or
the documentation supplied with the application you are using.
T ypically, WORKABOUT PRO S hand-helds are configured at the
factory and arrive ready for use.
All approval and safety information is outlined in the
‘WORKABOUT PRO Hand-Held Computer User Manual’
– part number 8000024. This manual is available on our
web site www.psionteklogix.com. Open the ‘Products’ menu
followed by ‘Hand-Helds’. It is important that you review all
safety guidelines before charging a battery or operating a
scanner.
1.1 Charging The Battery
Batteries shipped from the factory are not charged. They must be
fully charged prior to use. Full capacity may not be reached until at
least 5 full charge/discharge cycles have been performed.
1.2 Installing The Battery
• Turn the fasteners at the base of the battery cover counterclockwise to unlock the cover and remove it. The top of the
stylus is shaped to help you loosen the fasteners.
• Insert the charged battery. Replace the battery co ver , and turn
the fasteners at the base of the battery cover clockwise to lock
the battery in place.
Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide11
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.