This document and the information it contains is the property of Psion
Teklogix Inc., is issued in strict confidence, and is not to be reproduced or
copied, in whole or in part, except for the sole purpose of promoting the sale
of Psion Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or sub-contract, or
in any manner detrimental to the interests of Psion Teklogix Inc.
All trademarks are the property of their respective holders.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio
waves. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the
Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg. Tests for SAR are conducted using standard operating
positions accepted by the FCC with the EUT transmitting at the specified
power level in different channels.
The highest SAR value for the device as reported to the FCC is 0.099
W/kg when placed next to the body.
The FCC has granted an Equipment Authorization for this device with all
reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this device is on file with the
FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid
GM37525CMCS.
after searching on FCC ID:
Return-T o-F actory Warranty
Psion T eklogix warrants a return-to-f actory warranty for a period of one year.
In some regions, the warranty exceeds this period. Please contact your local
Psion Teklogix office for details. For a list of offices, refer to “Support Services & Worldwide Offices” on page 29. The warranty on Psion Teklogix
manufactured equipment does not extend to any product that has been tampered with, altered, or repaired by any person other than an employee of an
authorized Psion Teklogix service organization. See Psion Teklogix terms
and conditions of sale for full details.
Service
When requesting service, please provide information concerning the nature
of the failure and the manner in which the equipment was used when the failure occurred. Type, model, and serial number should also be provided.
Before returning any products to Psion Teklogix, please call the Customer
Services Group for a Return Authorization number.
Support Services
Psion Teklogix provides a complete range of product support services to its
customers. For detailed information, please refer to “Support Services &
Worldwide Offices” on page 29.
Disclaimer
Every effort has been made to make this material complete, accurate, and upto-date. Psion T eklogix Inc. reserves the right to make changes without notice
and shall not be responsible for any damages, including but not limited to
consequential damages, caused by reliance on the material presented, including but not limited to typographical errors.
2Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
1. Basic Preparation
Important: All approval and safety information is outlined in the
This quick start guide provides basic information on the operation
and features of the Psion Teklogix WORKABOUT PRO M (Monochrome) and WORKABOUT PR O C (Colour) Hand-Held Computer. For more detailed information, refer to the WORKABOUT PRO M/C Hand-Held Computer User Manual (PN 8000024) or the documentation supplied with the application you are using.
T ypically, WORKABOUT PROs are configured at the factory and
arrive ready for use.
1.1 Charging The Battery
Batteries shipped from the factory are not charged. They must be
fully charged prior to use. Full capacity may not be reached until at
least 5 full charge/discharge cycles have been performed.
1.2 Installing The Battery
• Turn the fasteners at the base of the battery cover counter-
• Insert the charged battery. Replace the battery cover , and turn
‘WORKABOUT PRO Hand-Held Computer User
Manual’ – part number 8000024. This manual is
available on our web site www.psionteklogix.com
through the Teknet extranet. It is important that you
review all safety guidelines before charging a battery
or operating a scanner.
clockwise to unlock the cover and remove it. The top of the
stylus is shaped to help you loosen the fasteners.
the fasteners at the base of the battery cover clockwise to lock
the battery in place.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide3
Note: If you are using a docking station, you can insert an
uncharged battery, dock the unit and switch it on.
1.3 Switching The Unit On
• Press and hold down the <ENTER/ON> key for at least
one second to switch the unit on.
• When the LED flashes green, release <ENTER/ON>.
A splash screen displaying the Psion T eklo gix logo and the
Microsoft® Windows CE .NET logo appears followed by the
startup desktop.
Note: If the unit was already in use – the unit may be off (suspend
state) – pressing <ENTER/ON> ‘wakes’ the unit fr om this
state. The screen in which you were working prior to the suspend state is displayed.
1.4 Switching The Unit Off (Suspend)
• Press the <BLUE> key, and then press <ENTER/ON> to
switch off the WORKABOUT PRO.
4Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
2. Getting T o Know The WORKABOUT PRO
2.1 Features
Sound Port
Stylus
(pointing tool)
LED
(Light Emitting Diode)
Microphone
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide5
End Cap
Back Cover
Battery Cover
Battery Cover
Fasteners
Tether Port
Low Insertion
Force (LIF) Port
Audio Jack
6Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
2.2 The Battery
The WORKABOUT PR O will operate with a standard 1800 mAh
Lithium Ion battery pack, a high-capacity 2700 mAh Lithium-Ion
battery pack or three AA alkaline batteries. If you are using a Lithium Ion battery pack, the battery pack must first be charged.
Warning: Before charging or using the battery pac k, it is critical
that the safety information in this section be reviewed
and that all warnings are strictly followed.
BA TTERIES ARE CONSIDERED HAZARDOUS
W ASTE. For proper disposal, forward all
to one of:
Psion Teklogix S.A.
La Duranne; 135 Rue Rene Descartes; BP 421000
13591 Aix-En-Provence
Cedex 3; France
Warning: TO PREVENT the battery from leaking acid, generating
heat or exploding, adhere to precautions below.
• The battery incorporates built-in safety devices. To ensure
their proper function, do not disassemble or alter any parts
of the battery.
• Do not short-circuit the battery by directly connecting any of
the exposed terminals with metal objects such as wire. Do not
transport or store the battery together with metal objects such
as necklaces, hair pins, etc.
• Do not dispose of batteries in fire.
used batteries
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide7
• Do not use or leave the battery near a heat source such as a
fire or heater.
• Do not immerse the battery in water.
• When charging, use the battery charger specifically designed
for the battery.
• Do not pierce, strike, throw or step on the battery.
• Do not directly solder the battery.
• Do not connect the battery to an electrical outlet, vehicle
cigarette lighter, etc.
• Do not put battery into a microwave oven or pressurized
container.
• Do not use the battery in combination with primary batteries
(such as dry-cell batteries) or batteries of different capacities
or brands.
• Immediately remove the battery from the device or battery
charger and stop use if the battery gives off an odour, generates heat, becomes discoloured or deformed, or in any way
appears abnormal during use.
• Do not continue charging the battery if it does not recharge
within the specified charge time.
• The battery may burst or ignite if the battery leaks. Always
ensure that it is away from any exposed flames.
• If leaking electrolyte sprays into your eyes, rinse them with
clean running water, and immediately seek medical attention.
• Do not store the battery in extremely high temperatures
(e.g., a vehicle, strong direct sunlight, etc.). This may cause
the battery to overheat or ignite, and it may also reduce the
performance and service life of the battery.
• Do not use in areas where static electricity is greater than
what the manufacturer guarantees.
• Keep batteries out of reach of children.
8Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
2.2.1 Battery Swap And Runtime
Under normal operating conditions, fully charged 1800 mAh batteries hold a charge for up to 8 hours. 2700 mAh batteries can hold a
charge for up to 12 hours.
2.3 The Keyboard
Arrow Keys
Scan Key
Scan Key
Contrast Key
Orange Key
Display
Backlight Key
Blue Key
The keyboard is equipped with a set of standard keys along with a
<ORANGE> and a <BLUE> modifier key to provide access to additional keys and system functions. These additional keys are
colour coded in orange and blue print above the standard ke ys.
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide9
2.3.1 Modifier Keys
The <SHIFT>, <CTRL>, <ALT>, <ORANGE> and <BLUE> keys
are modifier keys. Pressing a modifier key changes the function of
the next key pressed. For example, a square brack et is printed
in orange print above the <4> ke y. Pressing the <ORANGE> key
followed by the <4> key displays a square bracket rather than the
number 4.
The <SHIFT>, <CTRL> and <ALT> keys operate much like a desktop keyboard except that they are not chorded – two k e ys cannot be
held down simultaneously. The modifier key must be pressed first
followed by the key whose function you want modified.
Activating Modifier Keys
When a modifier key is pressed once, the modifier key icon displays the
key in lowercase letters in the taskbar. For example, pressing <CTRL>
once displays
modifier key becomes inactive and disappears from the taskbar.
ctrl key in the taskbar. Once the ne xt key is pressed, the
Locking Modifier Keys
When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’
modifier key icon displays the key in uppercase letters in the taskbar.
For example, pressing the <BLUE> key twice locks it on – it is displayed as BLUE KEY in the taskbar at the bottom of the screen.
The locked modifier key remains activ e until it is pressed a third time
to unlock or turn it off.
2.3.2 The Keys
The <SHIFT> Key
Used to display uppercase alpha characters and provide access to
the symbols above the numeric keys.
10Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
Loading...
+ 34 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.