
Cable Test
Link Test
Network Test
The NetXpert 1400 performs a wire map test,
measures cable length using capacitance and TDR,
and speed certifies cables up to 1 Gigabit Ethernet.
Save one test to a PDF Save *.tst to a CSV List of Test Results
Cable Counter Setup
Cable List
Detailed Test in Full
Screen
The Link Test menu displays Ethernet port services provided
by an active switch, router, or NIC.
Port Discovery and Capability
Power over Ethernet Test
The Network Test menu provides advanced
network tests to discover, verify and
troubleshoot the network.
IPv4 Parameter Setup
DHCP
Test Results
Ping Test Results and
Address Setup
Save *.tst file to a PDF
IPv4 Parameter Setup
Display Units, Brightness and
Wiremap color scheme Setup
New Test List
Time and Date Setup
Toner for Tracing and
Port Location
Cable Test Menu
Link Test Menu
Active Port Location
via Blinking Status LED
.
Save *.tst file as CSV
Ping Test
VLAN Detection
CDP/LLDP Protocol
Information
Trace Route using ICMP
Protocol
Toggle:
PDF Data
Network Test Menu
File Manager Menu
System Settings Menu
Cable Type
Add
Edit
Edit Index
Delete
Select
…
Save
Cancel
More Options
Full Screen
DHCP request
Trace route
Tone Test
Blink Link Light
PoE Test
Setup IP Addresses
LLDP/CDP Screen
VLAN
Clear Screen
Toggle between Internal Memory - Memory Card
CSV Data
TST (Raw) Data
SD
Standby and Shutdown Setup
Company Details Setup
System Settings
The NetXpert 1400 Setup consists of 7 screens
to configure the unit to the user’s preference.
Use the Settings button
through the settings screens.
to navigate
Firmware Versions available
Firmware and Hardware Status
Page Up
Page Down
Previous
Next
List
File Manager
New File
Retest
Reload Factory Software
Restore Defaults
Save one Test to a PDF
Save *.tst file to a PDF
Icons
↔ SD Card
Internal Memory View
Toggle
Copy to SD Card
File Open
Delete File
Copy to Internal
Memory
File Manager
The File Manager contains saved PDF, CSV, and TST test files.
In this menu, they can be renamed, deleted, or transferred
between internal, external memory, and PC/Tablet.

Modular cable
interface
LCD Touch screen
RJ45 Jack and
F-connector
Kickstand
Battery Door
Menu buttons
Power button
D/C Charger plug
Micro USB and
SD card slot
Battery charge
status LED’s
Linked/Pass/Fail
LED’s
Status
button
RJ45 Jack
Hook strap loop
D/C Charger plug
Battery Door
Battery door screws
Menu Structure
Operation
The menu structure of the NetXpert 1400 is divided in
5 sub menus containing various operating options
System Settings
– IPv4 Setup
– Display Settings
– Time and Date
– Timeout Settings
– User Information
– Firmware Management
– Firmware/Hardware Versions
Cable Test
– Test Options
– Cable Type
– Cable Test (TP/Coax)
– Cable Faults
– Saving/Managing Results
Link Test
– Port Discovery
– PoE Test
– Tone
– Link Light
Network Test
– DHCP
– Ping
– Trace Route
– VLAN
– Discovery Protocols
File Manager
– Renaming
– Deleting
– Transferring
On/Off
• Turn NetXpert 1400 on by pressing the Power button .
• Tap the Power button to put the NetXpert 1400 in sleep mode.
• Press and hold the Power button to power the unit off.
Buttons and Touch Screen
The NetXpert 1400 features buttons and a full color capacitive touch screen to allow
easy navigation.
Touch an icon to select an option
Touch and drag a list to scroll up or down or touch the Up/Down arrows.
The NetXpert 1400 buttons assist with Navigation,
starting and stopping a test.
Settings Home Back Test
Settings The Settings button will display the settings menu. Pressing the settings
while in the settings menu will display additional menu screens.
Home The Home button will display the home screen from any menu.
Back The Back button will display the previous screen.
Test The Test button will start/stop a test.

Controls
Modular cable
interface
LCD Touch screen
RJ45 Jack and
F-connector
Kickstand
Battery Door
Menu buttons
Power button
D/C Charger plug
Micro USB and
SD card slot
Battery charge
status LED’s
Linked/Pass/Fail
LED’s
Status
button
RJ45 Jack
Hook strap loop
D/C Charger plug
Battery Door
Battery door screws
Quick Start Poster
Net
pert 1400
✗
The NetXpert 1400 Ethernet Speed Certifier offers a
complete solution to test copper cables. The NetXpert
1400 performs speed certification to test the data-carrying
capabilities of electrical Ethernet network cable up to 1
Gb/s by testing for noise in the network, detecting faults
in the cable wiring, and ensuring that cables are able to
support the speed capabilities of active equipment.
To certify Ethernet speed performance of copper cable
runs, the NetXpert 1400 handheld tester conducts Bit Error
Rate (BER) tests by sending data packets down specified
cable runs at defined data rates to check for errors at the
maximum throughput of the link. The NetXpert 1400 also
reports on signal quality that can impact high-speed data
transmission by measuring signal to noise ratio (SNR). Skew
measurements report on the signal time delay between
pairs that can impact Ethernet data transmission. The
NetXpert 1400 also provides continuity testing that detects opens,
shorts, miswires, split pairs, reversals, and high-resistance faults while
accurately measuring distance to faults and total cable length.
The NetXpert 1400 includes a comprehensive set of features for testing active
network capabilities: measure Power over Ethernet (PoE) to ensure the correct
power is available on the correct pins, use Port Discovery to ensure the correct
speed and duplex capability are available; connect at Gigabit Ethernet and run
Ping tests to verify connectivity to IP hosts; discover network devices using Cisco
Discovery Protocol (CDP) or Link Layer Discovery Protocol (LLDP); VLAN discovery;
Trace Route function displays the path internet packets travel to reach a specified
destination. The NetXpert 1400 also saves test reports and exports to PCs.
© 2014 Psiber Data. All right reserved. For more information please visit our website www.psiberdata.com